Overhead Equipment Tenders

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

CTN :41114140

31 Jul, 2025 NA

Nagpur - Maharashtra

Tender For supply of supply install comm of online 5 plus 5 head watering dewatering degassing unit , online weighning machine electronic type with display , 10 h online hydrotesting unit with automatic cutoff , upgradation of exsisting painting booth , upgradation of cold repair machine , supply install and comm of punching unit , revamping of valve screw_unscew machine , supply of gauges and measuring tools used in dpt , floor chain conveyor full sections complete , overhead chain conveyor unit with du

CTN :40307688

18 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for rafale aircraft - rag,wiping, packing retainer, bolt,plastic, bolt,plastic-red, lighting system, washer,flat, pre-formed packing, cockpit light bulb, glow plug, strap,tiedown,electrical components, screw,machine, o-ring, decal, closure, bolt,plastic, filter element,fluid, brake fluid,automotive, ring, pre-formed packing, pre-formed packing, screw,machine, lubricating oil, weapons, filter cartridge, rustremovalsolvant, audio kit foam, cover, spring, filter cartridge, chinstrap, adhesive, parts kit,oxygen mask, o-ring, packing with retainer, sealing compound, green locking varnish nuclass:2h269, day/night distress signal, jugular assembly, hardener,adhesive, insulation sleeving,electrical, detector,clogging-fuel, connector,plug,electrical, closure, lead,electrical, strap,webbing, inspection penetrant, filtering element, washer, bolt,plastic, primer coating, packing,preformed, oil repellent protection and lubrication or weapons/nuclass:2c095, neoprene adhesive, lining,helmet,shock absorbing, grease isoflex topas nb52, tube assembly,metal, dessicator, fuse, o-ring, hydraulic hose, cutting fluid, cleaning compound,solvent-detergent, adhesive 50 ml tube, card, bag,plastic, paint, rubber, nut,self-locking,plate, eru chassis, cleaning compound,solvent, adhesive, desiccating cartridge, ethyl alcohol, technical, ita/inu cable, fixing set for inu support, tape,pressure sensitive adhesive, clamp, polyurethane coating, tape,pressure sensitive adhesive, liner,flyers helmet, sealing compound, coupling butt, grease cartridge, silicon cartridge, coating, insulation sleeving,electrical,spec, stop-ring, safety valve, safety valve, coating compound,nonslip, coating compound,nonslip, gm80 polyester filter, rubber sheet,solid, setscrew, setscrew, insulation blanket,thermal,aircraft, seal,nonmetallic round section, guide,positionning, air duster(compressed air canister, fma switches case, equipped cable, isopropyl solvent(ipa)ispropanol, remover,electrical contact, o-ring, hmd liner, hmd liner, detector, leak 400ml sr, lock-wire, bearing cage and needle rollers, adhesive, overhead lighting module, overhead lighting module, non resettable shock indicator, thread, tube assembly,metal, sealing glue, cover, o-ring, terminal board, terminal,lug, indicator lamp, adhesive, set of repair jack, leak detector spray, rps container

Central Government And Public Sector

CTN :41078596

14 Aug, 2025 NA

Nagpur - Maharashtra

Tender For (1) provision of overhead water tanks at rajoli, nagbhir, dewalgaon, gonglee, brahmapuri and wadsa stations (2) construction of rcc over head tank of 50,000 litre capacity at mulmaroda station (3) provision of rest room, toilet, water supply for track machine staff at gonglee station under the jurisdiction of aden/nab.

Central Government/Public Sector

CTN :41074791

05 Aug, 2025 3.96 Crore

Delhi - Delhi

Tender For supply of vitrified tiles,granite,plaster of paris false ceiling,roller blinds,laminated flush door,premium acrylic emulsion wall paint,wpc panelling,wash basin,cpvc pipes,baffle ceiling,structural steel,marine plywood,water proofing,fire door,12 mm thick frameless toughened glass door shutter,upvc windows,calcium silicate false ceiling,25 mm medium class pvc conduit,frls copper wire,modular accessories,modular base cover plate,utp cat 6 cable,2 m cat 6 patch cord,cat 6 information outlet,face plate for single jack,led profile light,led downlighter spot light,led linear lights,led recessed luminaries,large format display,24 port jack panel,matrix switch,15u network rack,fire survival armoured cable,portable fire extinguisher,work table,overhead shelf,hot bain marie,hot display counter,deep freezer,water boiler,milk boiler,two burner cooking range,single sink unit,two door refrigerator,elecric idli steamer,electric oven,dosa plate,potato peeling machine,vegetable cutter,single stock pot range,three burner cooking range,

corporations/Associations/Others

CTN :41023716

25 Jul, 2025 NA

Bilaigarh - Chhattisgarh

Tender For tender for water supply material, hygiene items, boring material, kelith machine for removing pump and cleaning of overhead water tank

CTN :41019672

25 Jul, 2025 NA

Thoothukudi - Tamil Nadu

Tender For lab equipment for machines lab - consumables, plc trainer kit allen bradley micro 810 plc analog and digital i/o module plc trainer with allen bradley micro810controller (2080lc1012qwb) 6 digital inputs, 2 analog inputs and 4 digital outputs 6 digital input switches 2 analog inputs with dc (0-10v) variable input 4 digital relay outputs with led indication 4 no contacts of the relays connected at outputs of the plc and a buzzer 24v operated, built-in power supply, additional 5v power supply computer connectivity to download the program using usb port with cableprofessional programming software - component connect workbench (ccw) legend printed in the pcb closed wooden cabinet, trainer kit - interfacing of discrete field devices with plc (push button, limit switch, reed switch, 3-wire proximity sensor and buzzer)sequence of operation: develop ladder logic in plc to execute the following logical relation between the input and output field devices. y = a + b + c + d y = a. b.c. d y = (a+b). (c+d) y = (a.b) + (c.d) interface contains: plc input interfacing push button (a) limit switch (b) reed switch (c) 3 wire inductive proximity sensor (d) plc output interfacing buzzer (y)closed wooden cabinet, ttrainer kit plc based conveyor system with pre warning siren interfacesequence of operation: develop and execute ladder logic in plc using an on delay timer to delay the start of a conveyor. while press the start button, activate the warning siren for pre-set time. after the pre-set time delay the warning siren turns off and the conveyor starts running. when stop button is pressed turns off the conveyorinterface details sloped conveyor system:mechanical setup: sloped conveyor integrated with 1 nos. shawl sheet metal models for material handling demonstration. plc input interfacing: 1 no. inductive proximity sensors to detect presence of shawls on the conveyor. 1 no. start push buttons one for each conveyor. 1 no. stop push buttons for individual conveyor control. 1 no. fwd/rev toggle switches to set direction of conveyor operation (forward/reverse).plc output interfacing: 1 no. siren to provide audible alarms upon detection events or conditions. 1 no. conveyor belts driven by geared dc motors controlled through plc for start/stop and direction.all components housed in a metal closed cabinet for safety integration, itrainer kit plc based water level control system interface sequence of operation: develop and execute ladder logic in plc to fill the empty tank with liquid when the start button is pressed. when liquid reaches the high level, turn off the pump motor and turn on the solenoid valve to drain the liquid from tank. when liquid reaches the low level, turn off the solenoid valve and turn on the pump motor for refilling. interface external pilot lamp with plc to indicate the operation of pump motor and solenoid valve. interface contains: low high level sensors as input to the plc water tap as output from the plc water pump motor control using outputs of the plc water tank with sump and overhead tank model 2 levels sensor switches and 12 v pump 24 v solenoid valve to drain water, foot valve arrangement to take the water from the sump12 v and 24v power supply provided, trainer kit plc based counting of moving objects on two conveyors interfacesequence of operation: a manufacturing plant is arranged with 2 feeder conveyors for transferring the objects into the plant. develop and execute ladder logic using math instruction in plc to get the total number of objects transferred by 2 conveyors into the plant. when the count of total object has reached pre-set count value, turn on buzzer to give beep sound for 1 second and turn off the conveyors.interface details sloped conveyor system: mechanical setup: sloped conveyor integrated with 2 nos. shawl sheet metal models for material handling demonstration. plc input interfacing: 2 nos. inductive proximity sensors to detect presence of shawls on the conveyor. 2 nos. start push buttons one for eac

Central Government/Public Sector

CTN :40969873

28 Jul, 2025 2.00 Crore

Jorethang - Sikkim

Tender For supply, installation and commissioning of medical equipment, instruments, furniture and items for jorethang chc - defibrillator, suction machine, refrigerator 230 ltr, x-ray view box, instrument boiler, dressing trolly, medicine trolly, ecg machine 12 channel, infusion pump, syringe pump, patient trolly, catheter tray, wheel chair, footsteps, screen, abg machine, nebulizer, vertical autoclave, lyrangoscope adult, lyrangoscope child, water purifier, gyeser 25 ltr, surgical scissor, thermometer, tongue depressor, transfusion kit, otoscope, intubation tray, urinal/bed pan, kidney tray, needle distroyer, ambu bag/adult/pediatric, oxygen cylinder d-type, hub cutter, extension cord, stethescope, adult weighing machine, bp apparatus pediatric, height scale, neonetal weighing scale, a.c 1.5, patient stool, pediatric weighing scale, digital thermometer, microscope, vdrl shaker, phlebotoxy chair, haemometer, steel rack, computer/printer, eye shield, neck shield, medicine rack, stand fan, bp apparatus digital/manual, iucd tray with lid large, iucd tray with lid medium, iucd tray with lid small, instrument trolly, artery forceps curved, artery forceps straight, sponge holding forceps, uterine sound, knife dish, steel drum small, steel drum medium, steel drum large, fsh fetel doppler, suture cutting scissor small, suture cutting scissor medium, infant weighing machine, glucometer with strips 500 nos, haemoglobinmeter with strips 500 nos, medicine clipboard, ot light for iucd, breast feeding chair recliner, spot light, instrument tray big, instrument tray small, instrument tray medium, ot table, forceps, kelly forceps, mosquito forceps, scalped handle, cutting scissor, tissue forcep, allis tissue forcep, boney tissue forcep, gallipot/sputum mug, dressing set, cheattle forcep, surgical blade, needle holder/curved/straight, artery forceps, staple remover, inverter 5 kv, dental x-ray, dental chair with compressor, scaler,roror and hand piece, a.c 2 ton, distilled water filter, rvg sensor, laptop, acrylizing unit for denture, polishing unit, micromotor, straight hand piece, denture flasic, semi adjustable articular/dog bite, reclining chair, radient warmer, photo tharepy (led), billi blanket, double dome ot light, anesthia workstation, cautary machine, 02 cylinder b-type, ressutation kit/adult/pedia, weighing machine adult, fumigator, portable ot light (single dome), table fan, crash cart, ot instument set, multivital monitor with accessory, ventillator, weighing machine neonatal, labour table, recurssertation tray, baby suction, ldr bed, iv stand, pv table, nst machine, doppler machine, inverter 3kva with batteries, cardic table, ambu bag/adult/pediatric, fetoscope, delivery set, dnc set, pph set, pv exemination tray, ppiucd set, cidx tray, dressing drum(big), se set, geyser 15 ltrs, shoe rack, stand fan, fowler bed with mattress, bed side patient locker, 0xygen cylinder d-type, bbr, inverter for fridge, examination couch, overhead pully/multi exercise chair, quadrileps table/chair, supinator/pronator exercise, wobble board, shoulder wheel, grip strengthening equipment, parallel bar, irr lamp, ift, ultrasound tharapy, tens, dumbells 1kg/2kg, weight cuff set, ankle exercise, c.p.m (lower), static bicycle, kinesiology tape, autorefrectometer, slit lamp, m.g.p.s, generator 50 kva, shifting of x-ray, dental machine and equipments (service engineer charges, minor electrical works, minor civil works, labour charges and other miscellenous expenses, washing machine, drying machine

CTN :40977440

06 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of kitchen equipement - 3-door work-top refrigerator , chest deep freezer , conveyor toaster , sandwich griller , hood with ss oil baffle filter , hot air ducting , 3 hp blower fan , fresh air ducting , exhaust fan 18 inch , fresh air grill , lpg manifold system , lpg pipeline , single sink wash basin , single burner cooking range , spice table , double burner cooking range , hot plate chapati plate , food pickup table , overhead shelf 60 inch , overhead shelf 72 inch , soil dish landing table , double sink unit , pot rack , clean dish rack , pantry rack , supporting table with 2 shelf , gastronorm pan large , gastronorm pan medium , pressure cooker 12 l , pressure cooker 5 l , ms tawa , steel flask 2 l , aluminium patila 40 l , aluminium patila 36 l , steel dustbin 20 l , steel plate 5 compartment , water glass 300 ml , aluminium tea kettle 2 l , aluminium bucket 20 l , steel bucket 10 l , serving spoon and paan ladle , dabba 10 l , dabba 5 l , dabba 1 l , dabba 0.5 l , atta flour storage drum 50 kg , saagdaan3comptmnt , serving bowl mukta vati , spoon ap spoon , tea cup and saucer , tea urn 10 l , hot pot 5 l , mixer grinder 1000w , microwave oven 20 l , stand with aluminium tub , electric kettle 1.5 to 2 l , insect killer machine , kitchen jug 2 l , idli steamer 56 pcs , serving tray 12x16 inch

Central Government And Public Sector

CTN :40388004

28 Jul, 2025 NA

Chandigarh - Chandigarh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; 10000 ltr overhead water tank isi marked heavy duty; service provider

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector