Packing Articles Tenders

Central Government / Public Sector

CTN :45716444

06 Jul, 2026 NA

Mathura - Uttar Pradesh

Tender For procurement of ppa dosing pump spares (tushaco) - rotor set,p/n-1, grafoil packing,p/n-8.1, gasket set,p/n-24, pin dowel,p/n-12, bush bearing,p/n-9, front cover,p/n-18, ball bearing housing,p/n-5, casing,p/n-11, pump with gear box

Central Government / Public Sector

CTN :45478545

04 Jul, 2026 1.17 Crore

Dhanbad - Jharkhand

Tender For corrigendum : tender for supply of electrical consumable and miscellaneous items for hurl sindri c - cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-100mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-200mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length 300mm, material nylon 66, pack size 100. electrical contact cleaner spray, quick dry, packing size for liquid(ml)-500ml galvanized zinc spray, finish type-bright silver, zinc-enriched coating to repair surface damage protection against corrosion, special feature-rust resistance, packing size for liquid(ml)-500ml. silica gel, colour of silica gel-blue, particle size -9 to 12 mm, air tight container for packing of silica gel-plastic. silicon sealant, physical state- viscous paste, appearance-translucent/ opaque, color-clear/black/white/gray, surface cure-5-10 min, packing size(ml)-300ml m-seal, shelf life 12 months, hardness 75-80, impact strength - 2.5 * 3kg / c * m setting time at 30 deg c min-60 min, working temp limit 80 deg. c component resin and hardness, packaging size-1 kg gap filling pu foam spray(puf seal), application fill the gap between wall & tray, conduit pipe and wire sealing, packing size for liquid(ml)-750ml. silicon sealant gun, feed type: push-fed gun, type: cordless-corded glue gun pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour red, length-6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive- rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour yellow, length 6.5 mtr, voltage resistance-lipto 600v. pvc tape, material-pvc, adhesive- rubber bases adhesive, adhesive side-single side, temperature range (-40 degree c to 125 degree c), colour blue, length 6.5 mtr, voltage resistance-upto 600v pvc tape, material -pvc, adhesive rubber bases adhesive, adhesive side- single side, temperature range(-40 degree c to 125 degree c), colour-black, length 6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour green, length 6.5 mtr, voltage resistance upto goov ht-tape, self bonding electric tape, for high-voltage(upto 69kv), corona and ozone resistant, moisture and corrosion resistant, overload temperature 130 deg. c. roll size 9.15 meters. teflon tape, packing type-piece, elongation % 50-60, length of tape-9 mtr, application of colour tape white al foil tape, color-sever, type-aluminium foil tape 2 inch, cello tape type single sided, tape dispenser type-high bond, self adhesive, cello tape roll size-15 meters waste cotton doth emery paper, grit size grit 40-60, material emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel. roll length-40 inch. emery paper, grit size-grit 220-400, material-emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel roll length 280 mn trubble gum, strong glue trap, type- glue board, container type-sachet, protection against-rats titanium putty, 1 kg 1.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 200 2.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 100 4 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 10 1.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 200 2.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 20

Central Government/Public Sector

CTN :45731295

15 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of hex head bolt complete for centre pivot arrgt. to drg.no. t-0-6-614 col.i alt " j "--- items coated with rust preventive oil shall be covered in bio-degradable polythene cover special condition : suitable packing to be done to avoid damage during transit, unloading and rust prevention during storage. [ warranty period: 30 months after the dateof delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731779

08 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of bottom cover for cp pin train set bogies to drawing number aaa06079, alt 'b'--- special condition : suitable packing to be done to avoid damage during transit, unloading and rust prevention during storage. there will be minor changes in the drawings. the supplier shall obtain the latest drawings before commencing manufacturing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45567481

14 Jul, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of harness of lhb eog non -ac lscn coaches with fdb on cabin side area only, as per drawing: edts452, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed ina wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as perinstructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730923

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of led light fittings for passenger area in wjcc coach for br railways, as per drawing: edml270, rev. 0, packing instruction: light fittings:- each fitting to be wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( single ply corrugated). finally upto 24 lights to be packed in a card board box ( double ply corrugated ) and tied with 3 packing strips horizontally and 3 vertically. detachable diffuser if applicable with light fitting as per drg/spec shall be supplied in separate packing with each diffuser wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( double ply corrugated)and tied with 3 packing strips horizontally and 3 vertically. quantity of diffusers in a box shall be matching with the no. of corrosponding light fitting in each box. the material used for product packaging shall be eco-friendly. a list should be pasted on each box showing order no ,pl no, description of the item, drg.no/spec.no, qty,firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730995

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of cable duct a 45 cover,in standard slot grey, as per drawing: cat no cda45sg,packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730996

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of light fittings for shovan chair car coaches for bangladesh railways consist of led light with nl(10 nos.) & diffusers., as per drawing: edml265, rev-nil, packinginstruction: light fittings:- each fitting to be wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( single ply corrugated). finally upto 24 lights to be packed in a card board box ( double ply corrugated ) and tied with 3 packing strips horizontally and 3 vertically. detachable diffuser if applicable with light fitting as per drg/spec shall be supplied in separate packing with each diffuser wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( double ply corrugated)and tied with 3 packing strips horizontally and 3 vertically. quantity of diffusers ina box shall be matching with the no. of corrosponding light fitting in each box. the material used for product packaging shall be eco-friendly. a list should be pasted on each box showing order no ,pl no, description of the item, drg.no/spec.no, qty,firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730997

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of self-priming mono-block pump assembly without controller, as per drawing: edts186, rev-a, corr-1,2, anx-1, oga as per annex-2, packing instruction: alternator,rru, erru&accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gapbetween each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731013

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder juction box for bangladesh coaches, as per drawing: edml261, rev. 1, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the item &its packing shall carry a qr code(optional) containing thedetails as listed below (qr code(optional) to be affixed near name plate of item &on top ofpacking) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

By Cities

By States

By Agencies

By Ownerships

By Sectors