Get complete information related to latest Pipes And Fittings Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipes And Fittings Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipes And Fittings Tenders.
Tender For bid to ras supply of piston set with pin and lock , piston ring set , main bearing , big end bearing , thrust washer , connecting rod bush , engine overhauling gasket with o ring and head gasket , inlet and exhaust valve , inlet and exhaust valve guide , inlet and exhaust valve seat , inlet and exhaust valve oil seal , front and rear crank shaft oil seal , inlet and exhaust rocker , chain tensioner set of 02nos , chain tensioner protector with lock set of 05nos , oil pump assy , water pump assy with pully , fan belt , fan belt tensioner , injectors with o ring , clutch plate , pressure plate , flywheel crank shaft pilot bearing , clutch cylinder lower and upper with adaptor , clutch cylinder upper , rubber hose pipe complete set with clamp , oil filter , diesel filter , air filter , ac filter , exhaust manifold stud 12no , turbo charger assy with gasket , inter cooler cover stud with bolt , benjo washer 12 14 17 19 22 no , thermostat valve , temprature sending unit , oil sending unit , heater plug , engine dummy plug , engine mounting left side , l key 14 no , valve grinding stick big and small , steel cleaning brush big and small , grinding paste , nut bolt 10 no , nut bolt 12 no , wiper blade ) /bid number : gem/2026/b/7555899 * /dated: 18-05-2026 & & / bid document 1 / 36
Tender For supply of ss pipe fittings for wag-9hc (shell piping) for e70 brake system as per specn. clw/ms/3/053 alt.21 ( each set consists 33 items as per set details attached) [ warranty period: 30months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of special repairphc82049075 diltiazem special repair 120 mg oral tab/cap [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of support angle (small) for 32 nb pipe as per drawing no. judw/mech./22-769, special repair no. 1 [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of one coach set of underframe details (cross member assy,stiffeners etc) fortrain set dtc coaches to drg no. 1. 72711024, alt."b" -1 no 2. 72711025, alt."b" -1 no 4. 72711027 alt 'c' -1 no, 3. 72711026 alt 'c' -1 no, 5. 72711028-1 no, 6. 72711029-1 no, 7. aae11542-1 no,8. aae11102-1 no, 9. aae11101, alt."a" -2 nos, 10. aae11192-2 nos, 11. aad11701 alt 'b'-1 no, 12. 72711039 alt 'a'-1 no, 13. 72711040 alt 'a'-1 no, 14. aad11526 alt 'b' -13 nos 15. aad11955 alt 'a' -1 no, 16. 72711041 alt 'a' -1 no, 17. 72711042-1 no, 18. 72711037-1 no, 19. 72711038-1 no, 20. 72711015 alt 'a' -9 nos, 21. 72711016 alt 'a' -9 nos, 22. aae11137 alt 'a' -1 no, 23. aae11138 alt 'a' -1 no, 24. 72711030-1 no, 25. 72711031-1 no, 26. 72711035, alt 'a'-1 no, 27. 72711036, alt 'a'-1 no, 28. aad11944, alt 'a'-2 nos, 29. aad11945-2 nos, 30. aad11946-2 nos, 31. aad11950, alt 'b'-1 no, 32. aad11951, alt 'b'-1 no, 33. aad11964-2 nos, 34. aae11134, alt 'a' -1 no, 35. aae11131, alt 'a' -1 no, 36. aae11381, alt 'a' -1 no, 37. aae11071 -1 no, 38. ssa11103 -1 no,39. ssa11104 - 1 no, 40. 72611031 - 1 no, 41. 72611032, alt 'a' - 1 no, 42. aae11590, alt 'b'- 2 nos, 43. 72611029 - 1 no, 44. 72611030 - 1 no, 45. aae11657 alt 'a'- 2 nos, 46. aae11658 - 4 nos, 47. aae11660 - 2 nos, 48. aae11587 - 2 nos, 49. aae11586 - 2 nos, 50. aaa12540, alt 'a' - 2 nos, 51. aae11697 - 2 nos, 52. aae11698 - 2 nos, 53. aae11591 - 4 nos, 54. aae11663 - 4 nos, 55. aae11661 - 2 nos, 56. aae11662 - 2 nos, 57. aae11059, alt 'b' - 1 no, 58. aae11060, alt 'b' - 1 no, 59. aae11588, alt 'a' - 1 no, 60. aae11589 - alt 'b' -1 no, 61. aae11730 - 2 nos, 62. aae11731 - 2 nos, 63. aae11664 - alt 'b' -2 nos, 64. 72711052 alt 'a'-1 no, 65. aae11802 - 2 nos, 66. aai11574 - 2nos, 67. aai11588 - 2 nos, 68. aab12088 - 2 nos, 69. aai11576 - 2 nos, 70. aai11572, alt 'a' - 1 no, 71. 89811025 - 1 no, 72. 89811024 - 1 no, 73. aai11571, alt 'a' - 1 no. special condition : all the items are to be supplied as coach set only. finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev.-01 with dmnd.-01 or latest shall be applied with epoxy zinc phosphate primer as per rdso/specno.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of under frame arrgt for memu/dmc/3ph to drg no. 74511059, alt 'c' col 1. firm shall fulfill the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : packing condition as per drg no icf/j&t/misc-2487 alt 'b'. the under frame should be supplied as normal side up and side bearer side down. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item] [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of distance bush to drg.no.aaa05100, alt'a' special condition : alternatively material to specn.ss304 may be permitted. [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of 1.dome cum reservoir assly.complete (l.h) for fiat bogie with air springs todrg. no. 66704005, col.i, alt. "b" = 2 nos . 2.dome cum reservoir assly.complete (r.h) for fiat bogie with air springs to drg no. 66704011, col.i, alt. "b" = 2 nos. red oxide zinc chromate primer only to be coated to specification is:2074 of thickness 15-20 microns. specialcondition : material specn.no. en10025-5, 2004, s355j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in detail drawing. items are to be packed in set. packing instruction. 1. dome shall be supplied in coach sets consisting of lh - 2 nos & rh - 2 nos. proper pairing of lh & rh domes shall be ensured. 2. two coach sets of domes (lh - 4 nos & rh - 4 nos) shall be packed in wooden or metal pallet to facilitate safe handling and transportation. 3. dome shall be secureley fastened to the pallets using metal strapping to prevent movement or displacement during transit. 4. each pallet shall be clearly labelled with: item description, manufacturer's name, purchase order(po) number and quantity. 5. the threaded portions shall be adequately protected with suitable protective covers to avoid damage during handling, storage and transportation. 6. the 85mm dia spigot hole shall be covered with plastic or rubber caps to prevent damage, dust ingress and entry of foreign materials. 7. any water remaining inside the domes after hydro testing shall be completely drained before packing to prevent corrossion and contamination during storage and transit. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of one coach set of stainless steel roof arch for for 3ph. kolkata metro mrm/dtc coaches to drg. nos. (mrm2/tc) 98416010, alt 'nil', col-i, 21 nos, (mrm2/tc) 98416011, alt 'nil', col-i, 04 nos. special condition : for packing: drg similar to icf/j&t/sk-1882, alt 'a' may befollowed duly altering the dimension and profile to the subject item. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]