Platform Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45535020

18 Jun, 2026 NA

South Tripura - Tripura

Tender For jjm scheme in mohonbhog rd block under sepahijala district/ construction of cement concrete platform , g.i. post including necessary fittings attached to chandicherra innovative scheme for fhtc under the jurisdiction of

CTN :45537832

29 Jun, 2026 13.08 Lacs

Villupuram - Tamil Nadu

Tender For providing cc pavement at new union office in gingee providing plinth protection platform at new union office in gingee providing fencing work and cement concrete floor(30000litre oht ) with open well cover at new union office in gingee

CTN :45526004

22 Jun, 2026 23.03 Lacs

Faridabad - Haryana

Tender For providing and laying 300mm dia. sw pipe sewer line and 80mm thick interlocking tiles at h.no. 1851 to 1857, h.no.1876 to 1898/5, h.no.1864 to 2348, near baghel chaupal , jawhar colony in ward no.9, nit faridabad.(recall)

CTN :45509175

22 Jun, 2026 72.78 Lacs

Gurgaon - Haryana

Tender For construction of additional hall at ambedkar chaupal in village naharpur kasan, ward no 14, div-ii, mc manesar.

CTN :45384453

18 Jun, 2026 NA

Arakandanallur - Tamil Nadu

Tender For corrigendum : for civil engineering department lab equipments are required as per new syllabus - upgradation of labarotariescivil department, flow table apparatus for concrete with accessoriesdimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

State Government

CTN :45502077

19 Jun, 2026 69.15 Lacs

East Godavari - Andhra Pradesh

Tender For construction of rcc platform at fishermenpeta mettacuru yanam 3rd call

State Government

CTN :45510466

25 Jun, 2026 NA

Silvassa - Gujarat

Tender For providing and installing gymnasium equipment at opp. sainik school, mota randha, d&nh. - pec dec flyfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* .50 dia. connecting bolts* extended handle provides multiple gripping positions.* adjustable seat.standard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 503lb / 228.16kgmainframe - 11 gauge 2.375 x 4.625 oval tubingcables - fiberglass reinforced nylon pulleys.upholstery - durafirm upholstery over 2 high density foamdimensions - 34"w x 57"l x 69"h (86cm x 145cm x 173cm), lat pull down + rowingfeatures:* dual-function design: enables both lat pull-down and vertical row exercises in one machine.* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat & leg hold downsstandard weight stack - 2:1 weight ratio with a 210 lb. weight stack provides 420 lbs. of resistance. also available in a 310 lb. weight stack.product weight - 549lb / 249.03kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 41 w x 78 l x 77 h (104cm x 199cm x 196cm), leg curl/leg extensionfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat back and leg rollersstandard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 505lb / 229.07kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 53 w x 40 l x 62 h (135cm x 102cm x 158cm), dip/chin assist*dual-function design: supports both weight-assisted chin-ups (pull-ups) and dips in one machine.*adjustable weight assistance: allows users to select assistance level based on strength and training goals.*heavy-duty commercial frame: built with high-quality steel for durability in high-traffic gym environments.*smooth counterbalanced system: ensures fluid, controlled motion throughout the exercise range.*ergonomic multi-grip handles: provide varied grip options for targeted upper-body training.*non-slip knee platform: offers secure support and comfort during assisted exercises.*premium upholstery & finish: durable padding and corrosion-resistant coating for long-term usesize: 58 x 46 x 85 inchesweight stack: 80kg, wrist curl machinesize: 18" x 34" x 39.37" weight stack: 100kg, preacher curl bench*ergonomic design: the bench is designed to support the user in a seated position, allowing for proper alignment and reducing the risk of injury.*adjustable components: features adjustable arm pads and seat height to accommodate users of various sizes, ensuring comfort and effectiveness during workouts.*durable construction: built with high-quality materials to withstand heavy use in both commercial and home gym settings.*compact footprint: designed to fit into smaller workout spaces without compromising on performance.size: 36" x 36" x 37", adjustable bench6-position ladder-style back pad adjustmentdimension: 59" length x 27" width x 22" height, simple flat bench, dumbbell rackholds one (1) pair each of 5-50 lb. hex dumbbells.30"h x 20"l x 40"wheavy duty 12-gauge steel construction, plate tree, functional trainersize: 80.8" x 55.3" x 24" weight stack both side: 150kg2:1 pulley ratio for smooth resistance32 adjustable cable positions81" cable travel lengthpremium aluminum pulleys for ultra-smooth motionintegrated multi-grip pull-up barband pegs for added resistance trainingbuilt-in pegboard storage sys

corporations/Associations/Others

CTN :45494415

29 Jun, 2026 NA

Bhatapara - Chhattisgarh

Tender For construction and repair of rcc drains, theatres, boundary walls, bt roads, platforms, toilets in various wards under the municipal corporation area.

Corporations And Associations And Others

CTN :45500578

16 Jun, 2026 44.14 Lacs

Delhi - Delhi

Tender For upgradation/ construction of lanes by providing rmc from h. no. 177 to 154, 159 to 172 opp. prajapati chaupal to h. no. 90 community centre to h. no. 90 and h. no. 127 to 122 in basant gaon in ward no. 153/sz

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

corporations/Associations/Others

Corporations And Associations And Others