Get complete information related to latest Primer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Primer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Primer Tenders.
Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut
Tender For epoxy resinbased zinc phoshphate primer , etch primer as per is 5666 , high build epoxy based paint , thinner for etch primer , thinner for epoxy primer and high build epoxy paint
Tender For corrigendum : supply of bricks non modular , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand , fine sand , moorum filling material , portland cement , vitrified floor tile 60x60 cm , white cement , paint primer , distemper paint , acrylic smooth exterior paint , synthetic enamel paint , white cement based putty , paint roller , paint brush 100mm , tmt bar 12 mm 580 kg and 08 mm 120kg , binding wire , rectangular hallow section pipe 50 by 25 by 2.50 mm , gi plan sheet, barge board upto 300 mm and gutter 600 mm over all girth , cgi precoated galvanised iron sheet 12by3 24 nos , cgi precoated galvanised iron sheet 6by3 12nos , self screw , welding rod , 4 inch cutting blade , iron angle frame for door angle size 40 by 40 by6 mm , wooden door 35 mm thick shutters , iron angle window 1 point 2 by 1 point 2 meter with grill bar and glass panes fix with silicon complete all fitting accessories , tower bolt , m.s door handle , door aldrop , calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595by595 mm , 4 mm dia steel wire rope lock u clamp set pu coated , aluminium with stainless steel ss coating 4 ft by 3 mtr mosquito net wire and meshs , 1.5 sqmm single core wire , 2.5 sqmm single core wire , 6 amp switch , 6 amp socket 5-pin , 16 amp switch , 16 amp socket , ceiling rose , 1200mm ceiling fan , modular fan regulator , led tube light 20 watt , 16 amp single pole mcb , 32 amp double pole mcb , mcb box 8way , pvc board 9 by8 inch , 25 mm casing capping , 25 mm casing capping clip , screw 1.5 , 6 mm pvc gatti , pvc 6-way board , insulation tap
Tender For paint yellow zine chromate , paint white enamel , paint sliver , paint rfu priming red lead , paint signal red , paint olive green primer , paint navy blue , paint green , paint golden yellow , paint epoxy aluminum , paint dark grey synthetic , paint coal tar epoxy black , paint black heat resistance , paint black enamel , paint azure blue , paint aluminum heat resistance , paint epoxy red oxide primer , spray hand liquid insecticide , battery aa 1 5 v , solder lead , wiper soft rubber , white spirit , turpentine oil solvent , thinner
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work for supply and apply of one coat of epoxy primer red oxide and two coat synthetic enamel oil paint anti corrosive at various structure as pe..
Tender For and fixing arrangements , providing and supplying high rise adjustable seating arrangement with height adjustment mechanism cushioned seating and sturdy base , providing fabricating supplying and fixing aluminium panel with aluminium frame including mesh fittings and installation , providing supplying and fixing wall mounted backside mirrors including cutting polishing edge finishing and fixing with suitable supports or adhesives , providing and fixing laminate finish on existing wooden cupboards including surface preparation adhesive application pasting of laminate sheets edge finishing and polishing , providing fabricating supplying and installing customized toughened glass partition of size 12 feet x 10 feet including frosted printed stickering necessary fittings and fixing arrangements , providing and applying wall puty and painting to internal wall surfaces of measuring 13 feet x 17.5 feet including surface preparation putty application primer and final coats , providing and fixing suspended false ceiling system using 12mm thick gypsum boards fixed over gi metal framework for an area of 650 sqft including supply installation jointing and finishing , providing fabricating supplying and installing wooden cupboard of size 3 feet x 2 feet x 6 feet including carcass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden table of size 3 feet x 3 feet x 5 feet including structure tabletop supports and finishing , providing fabricating supplying and installing glass door showcase unit of size 5 feet x 2 feet x 7.5 feet including structure glass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden storage box of size 2 feet x 3 feet x 3.5 feet including structure top opening doors internal storage space and finishing , providing fabricating supplying and installing aluminium entrance door with full height partition system of size 12 feet x 10 feet including aluminium framing glass panels door shutter fittings , providing fabricating supplying and installing l shape cushioned seating system of overall size 8 feet x 6 feet including structural framework cushioning upholstery and fixing for room 2 , dismantling shifting and refixing of exisiting door shelter canopy or shade including careful removal transportation within site reinstallation and proper fixing , providing fabricating supplying and installing internal door partition inside existing store including framing partition panels door shutter fittings and finishing , providing fabricating supplying and installing outer shelter structure for store area of size 30 feet x 24 feet including structural framework roofing sheets supports and fixing arrangements , providing fabricating supplying and installing aluminium partition system for canteen outer area covering a total of 900 sqft including aluminium framing infill panels glass or board fittings , providing supplying works for area preparation improvement and finishing including surface corrections flooring wall treatments //bid details 2 / 23 partitions and allied activities to make the space functional safe , providing fabricating supplying and installing aluminium glass partition locker unit of size 7feet x 5 feet x 2 feet including aluminium framework glass panels internal storgae compartments shutetrs