Pulley Tenders

Central Government And Public Sector

CTN :43194616

06 Jan, 2026 NA

Dibrugarh - Assam

Tender For at dbws -stripping of 25kw alternator along with its axle pulley and belt tensioning device, overhauling of 25kw alternators and belt tensioning device for a period of two years

Central Government / Public Sector

CTN :43195121

02 Jan, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of 30a 12 pin plug, 415v ac to type 299/12b of bch make or similar. for providing in 35 ton loco lifting jacks.

CTN :43188368

02 Jan, 2026 3.13 Crore

Jodhpur - Rajasthan

Tender For supply of trolley type portable air compressor single cylinder , trolley type portable air compressor single cylinder , power saw machine 18 , power saw machine , power tools for fastening capacity , oven electrode drying , electrical drying oven , chain pulley block 3 ton capacity , pipe bending machine hydraulic type , conduit pipe bending machine suitable for 15mm , conduit pipe cutting and threading machines , hydraulic jack hi lift type 3 ton , hydraulic jack hi lift type 5 ton , arbor press hand operated 2 ton capacity , combined surfacer and thickener , tenoning machine single ended , mortising machine , adjustable saw sharpener , universal wood working machine , hand shearingmachine capacity to cut 6 mm , lifting jack screw type 20 ton capacity , bench leaver shears 250 mm blade 3mm , portable jig saw machine , band saw machine with provision , circular saw machine 300 mm dia , pipe bender spool type with stand manually operated , beading machine , buffing and polishing machine , circle cutting machine 300 mm dia , combination turning up and machine , electrostatic spray gun unit , nibbling machine , portable pneumatic shear , power press 2 tons , seaming machine , slip roll former , tin smiths bench folder , tinmans shear 450 mm x 600 mm , universal cutting machine ) /bid number: gem/2025/b/6994971 * /dated: 15-12-2025 & & / bid document1 / 34

Central Government/Public Sector

CTN :43171396

23 Dec, 2025 51.35 Lacs

Angul - Odisha

Tender For supply of turbo charger,part no-4089362 , gasket,part no4095681 , gasket,part no-4095720 , gasket turbo charger,part no-4095974 , tube oil drain,part no4095739 , tube,part no-4095740 , screw banjo connector,part no-3094020 , screw hex flange cap,part no-4095971 , gasket exhaust manifold,part no-4095453 , moter starting,part no-4096534 , v belt,part no-4995243 , actuator etr fuel control,part no-3347905 , actuator etr fuel control,part no-3347907 , cap screw,part no-118226 , pressure sensor,part no-3408577 , fip gasket,part no-4095607 , clamp hose,part no-4095987 , clamp hose,part no-4096036 , clamp hose,part no-4096037 , pulley idler,part no-4096529 , sensor speed,part no3864333 , gasket camshaft cover,part no-4095564 , hose flexible,part no-4096452 , hose flexible,part no-4096038 , tube vent,part no-4095559 , clamp t bolt,part no-4095725 , gasket thermostate,part no4095558 , injector,part no-4902827 , seal o ring,part no-3347939 , sensor pressure amb air,part no3408585 , sensor pressure,part no-3408583 , hub fan,part no-4096000 , hose plain,part no-4095724 , seal o ring,part no-4095979 , clip,part no-4095890 , seal o ring,part no-4095892 , ball bearing,part no4095427 , ball bearing,part no-4095428 , alternator,part no-4096532 , sensor pressure,part no-3408589 , pressure sensor f engine,part no4902720 ) /bid number: gem/2025/b/6877343 * /dated: 13-12-2025 & & / bid document1 / 47

CTN :43162497

22 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of spark plug , speedometer cable , coil ignition , fuel filter mpfi , gear lever kit , sleeve cyl assy , wheel cyl assy , clutch plate , pressure plate , bearing tapper roller bearing , synchronizer ring , needle bearing , regulator sr40 , ram service kit , cabin lifting pump , chain 84l , shoe comp brake , accelerator assy , air cleaner element , oil filter , wiper blade , assy fuel filter , pre fuel filter , alternator belt , ac belt

corporations/Associations/Others

CTN :42970115

22 Dec, 2025 13.20 Lacs

Bardhaman - West Bengal

Tender For corrigendum : supply of non drive pulley(500x1600) , bearing centres distance= 2100mm, shaft dia at bearing= 110 mm. , drive pulley(630x16 00) , bearing centres distance= 2100m

CTN :41843589

17 Dec, 2025 NA

Bathinda - Punjab

Tender For bid to ras bid to ras bid to ras corrigendum : supply of mechanical engg labs and workshop equipment d d - hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , brake master cylinder , balancing machine , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , digital pyrometer , metallurgical microscope , spark test apparatus , standard prepared readymade samples or specimen with photographs , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch etc fitted on board , model of refrigeration cycle , digital anemometer , gas charging kit , model of open type refrigerant compressor , water cooler of 100 litre capacity , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , metallic cut section models of boiler mountings , model of nestler boiler , actual cut section model of four stroke single cylinder diesel engine , model of amal carburettor , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , slip gauges set , vernier bevel protractor , surface plate , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250 mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , simply supported beam apparatus , apparatus for determining centre of gravity of regular and irregular lamina , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing , models of pulleys , model of drilling jig , models of different types of gears , planner , milling machine conventional , power hacksaw , welding screen , gloves , oxygen regulator with spanner , motor coil winding machine , digital clip on meter , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , heat convector , desert cooler , electric oven , voltage stabilizer , digital energy meter , analog meggar , digital earth tester , plier , cutting plier 8 inch , leg vice 4 inch , round die handle , tap wrench- 5 by 16th of an inch to 1 inch , pipe vice , grinder , bench grinder 0.5 hp motor , scriber 8 inches , sheet steel wire gauge , circle cutting machine , edge folding machine , foot shear machine , rivet snap 0.25, 0.5, 0.75, 1 inch , rivet set 0.25, 0.5, 0.75, 1 inch , hand stake , funnel stake , round stake , taper stake , shovel , riddle , foundry bellow , silica sand , bentonite clay type , molasses , ladle , ladle holder , oil fired tilting type furnace , sand mix muller , moulding board //bid details 2 / 109

Central Government/Public Sector

CTN :42187557

17 Dec, 2025 NA

Dakshina Kannada - Karnataka

Tender For bid to ras supply of v pullys and v belts e e - dual duty v pulley w-tapr lock 450mm pcd, 6gr with taper lock bush 4040 pilot bore. pulleys have to be certified for dynamic balancing , dual duty v pulley w-tapr lock 400mm pcd, 6gr with taper lock bush 4040 pilot bore. pulleys have to be certified for dynamic balancing , dual duty v pulley 280-4-c with taper lock bush 3535 pilot bore. pulleys have to be certified for dynamic balancing. , dual duty v- pulley 335-4-c with taper lock bush 3535 pilot bore. pulleys have to be certified for dynamic balancing. , c-71 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , c-100 v belt. note - v-belt matched set of 4 nos, v- belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , v-belt c-3210- c-124. note- matched set of 4 nos, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , xpb-3350 cogged v belt, v- belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , b-46 v belt. must be matched set of 2 nos, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , b-75 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , c-110 v belt. must be matched set of 03nos, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , v- belt spb 1900. note- matched set of 4 nos, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , size- spb-1500, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , dual duty v- pulley - 14 inch pcd-10-8v grooves- 10, tlb- 5050, bore type- pilo,t pulleys have to be certified for dynamic balancing , dual duty v-pulley - 16 inch pcd-10-8v grooves- 10, tlb- 5050, bore type- pilot, pulleys have to be certified for dynamic balancing , dual duty v- pulley - 265-4-c grooves- 4, tlb- 3535, bore type- pilot, pulleys have to be certified for dynamic balancing , dual duty v-pulley - 236-3-c grooves- 3, tlb- 3020, bore type- pilot, pulleys have to be certified for dynamic balancing , dual duty v-pulley - 280-3-c grooves- 3, tlb- 3535, bore type- pilot, pulleys have to be certified for dynamic balancing , b-67 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , a-40 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , dual duty v-pulley 8v, 8gr,16 inch od j hub with j bush 100mm bore, tlb- 5050, pulleys have to be certified for dynamic balancing , dual duty v-pulley spc 560, 6 groove tlb- 5050, bore type- pilot, pulleys have to be certified for dynamic balancing , a-58 v belt, v-belt should be of pix- fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , c-108 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , c-130 v belt, v-belt should be of pix-fenner-skf-poly f plus only, fenner eco - drive is not acceptable, , v-belt cx-96 ,cogged belt, note- matched set of 6 nos, v-belt should be of pix- fenner-skf-poly f plus only, fenner eco - drive is not acceptable, //bid details 2 / 24

CTN :43047267

18 Dec, 2025 NA

Parganas - West Bengal

Tender For corrigendum : tender for supply of crankshaft machining , seal front oil , hub flywheel , rod push , housing flywheel , spring valve , pedestal , bracket engine lifting , manifold air induction turbo , heater air intake 12v , pump water assembly , housing thermostat , pump oil , seal oil-pick-up , switch oil pressure , cooler oil 6 plate , retainer fuel filter , pump lift , rod push , pipe filter , pipe lift pump to filter , leak off circuit pipe , cover fuel injectors , adjuster autotensioner , turbocharger 68kw (ac) t3 , adaptor tube , pipe oil feed , starter motor 12v , mat enforcement , cap blanking steel 3 by 4 inch bsp , stabiliser ram right hand , hose hybrid righthand , outer , pin pivot , mounting filler tube , grill lefthand , grill righthand side , latch bonnet , bonnet , cable wire , 1000mm , panel side grill lh , panel side grill , rh , plate compression , stopper plate , mount roof liner , assembly , rear , liner roof , spring door stay , leftside , bracket door stay , lh , stay door , rightside , bracket door stay , rightside , pressing mounting lh gas strut , pressing mounting rh gas strut , guard door striker , door painted & sealed left hand , door handle left side , door rightside , latch assembly inner , right hand , window frame right hand , seal window right hand side , glass leftside quarter light , glass rightside quarter light , glass tinted leftside 1 by 6 , glass tinted rightside1 by 6 , window gasket left hand side , window gasket right hand , seal top corner right hand , seat operator , fan face , mounting bracket fan , ram shovel , pin pivot , bearing liner , pin pivot , pin pivot 45 x 290mm , pin pivot , guide hose lh , guide r h , tube wear nylon , bracket mounting fire extiguisher , harness wiring chassis , harness roof , mat rubber , knob screw , harness maxi fuse , tail lamp leftside , tail lamp rightside , switch 12v , instrument cluster , light cluster warning , actuator 4wd switch , switch brake , switch brake light , arm wiper blade assembly , joint universal , bearing , spring tension brake pedals , lever - gear basic , knob with switch , plate retaining gaiter , pivot cable , steering shaft keyway , cover steering column front , hose , 3 by 8 bsp , 1000 , hose 10 bsp hp 560mm lvb to wa feed pipes , hose spiral , port adaptor , pipe slew , hose , hose 10 bsp hp 2390mm b bottom port , hose high pressure , bearing ball , kit-seal , valve main relief 227 bar , kit-seal , steering hydrostatick , kit-seal power track rod ram 75mm cyl x 45mm rod , piston rod , kit seal , ram slew refer page no. 657 , kit seal , cylinder , seal kit , kit seal , bush cylinder , kit seal , seal , ring packing , bearing taper roller , carrier wheel bearing 5 stud , kit-spacer , bearing taper roller , gear crownwheel & pinion 13 by 38 teeth , gear annulus ring , driveshaft , bearing taper roller , ring backup , kit-gear differential , driveshaft rear , ss700 , sideshift , valve solenoid assembly , solenoid assembly-3 way , gear 3rd 33t-3.5m , synchroniser , bearing , bearing 35 x 73 x 24 , gear 2nd 40t ss700 , pump assembly transmission , spring , seal rear , bearing needle roller , baffle , seat gearshit ball , seal ring (turquoise) , plate pressure 4mm , plate baffle , oil , plate oil baffle , filler filler tube , reservoir brake , pipe servo link , brake hose 1 by 4 x580m , bracket throttle , hose , strap air filter mounting , base pre-cleaner , element air , main , lead grid heater positive feed , lead grid heater positive feed , relay grid heater12 volt , unit ecu cold start , harness gird heater control , harness grid heater , hose top , hose bottom , bracket side panel mounting , bracket side panel mounting , fan 21 inch diameter 9 blade puller , bracket idler non-ac , bearing idler pulley , fuel line tank to water sepera , filter fuel assembly , baffle prefilter , bracket , hose water seprator , valve non-return , hose - 400mm , pivots clam jaw , hose , pin pivot , cap pipe , ram bucket 100x45 , ram

CTN :43115001

18 Dec, 2025 1.10 Lacs

Sumbal - Jammu And Kashmir

Tender For corrigendum : overhauling repairs to water turbine driven horizontal pumping unit at achoora gurez of misd hajin. - overhauling/major mechanical repairs/replacements of damaged non-functional mini water driven turbine (damaged by heavy snow slide) coupled with 03 cusec horizontal pumping unit. the job comprises of following works: pump sidei. engaging of labours in the machine drive chamber by way of moving of boulders and other trash till the machine chamber be cleaned and washed., ii. temporary oiling the turbine and pumping unit on machine chamber side till the the mechanism of machinery is free from rust and dust, then decoupling the pumping unit from the turbine coupling and genset from belting. using skilled labour and other tools and tackles., iii. dismantling of 8 x8 horizontal pumping unit from its existing pump foundation to machine floor smoothly without any hammer stroke using skilled job knowing personnel., iv. dismantling of the pumping unit parts at machine floor,removing of defective rotating kit assembly from the pump body using proper tools to be arranged by firm., v. shifting of the dismantled kit assembly with the allied accessories and defective chain pulley block to road side upto the lead of 150 m by head loading and then loading the rotating kit assembly in private load carrier to be arranged by the firm and shifting to workshop for conducting necessary repairs., vi. complete servicing of rotating kit cum bearing housing at workshop using diesel oil till the whole bearing assembly and rotating parts are washed and cleaned and free from rust and dirt. the job includes dismantling of bearing housing and removing of defective parts like damaged shaft, broken bearings and other items smoothly. the job includes removing of broken bolts from the bearing housing, re-tapping the damaged holes and providing and fitting of new holes., vii. repairs to impeller shaft of the pump by way of rebuilding the damaged portion using arc welding and then machining, polishing, threading completely till the size of the shaft is brought to required specifications. the job further includes providing and fitting of check nut as per sample., viii. manufacturing/providing and fitting of gm bush to suction part and gm cooling ring, gm gland with bolts. the job includes casting, machining, finishing to proper dimensions., ix. providing and fitting of high pressure gasket on suction side and delivery side., providing and fitting of ht bolts of assorted size, xi. rebuilding the wearing ring seats of suction and coupling end plates using ci welding electrodes. the job includes machining and finishing to proper dimensions., xii. repairs to defaced/ damaged impeller shoulder ring seats using ci welding electrodes. . the job includes machining and finishing to proper dimensions., providing and fitting of taper roller bearing on coupling side and gland side. the job includes greasing of bearing xiv. 32315, xv. 32314, xvi. assembling of bearing housing with rotating kit at workshop to check the rotating kit assembly is free from any obstacles and loading and shifting to site in private load carrier to be arranged by the firm including haltage and retun back of workers, turbine side:- repairs to turbine side by way of:complete cleaning and washing of turbine chamber by way of removing of boulders and other trash from the turbine by engaging of labours.complete servicing/ washing/oiling of turbine assembly in turbine chamber till the assembly of turbine and guide vanes are free from the rust and dust and then complete oil washing the guide vanes, guide hinges and outer body of turbineproviding and fitting if turbine shaft gm bush bearingtesting of turbine assembly on no-load decoupled from pump assembly by way of charging of turbine chamber to check the vibration, sound, rpm, setting of turbine guide vanes, hinges to ensure smooth functionre-installation of pumping unit by way of fitting of rotating kit assemblycomplete painting by black japa

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector