Road Furniture Tenders

Central Government/Public Sector

CTN :45716374

09 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For providing of custom bid for services - administrative approval for procurement of solar led blinkers and solar-operated led lighting systems at sasti expansion ocm

CTN :45738948

10 Jul, 2026 NA

West Kameng - Arunachal Pradesh

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom or toilet mirror (v3) (q4) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , bathroom water shower (v2) (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , flexible drain hoses for wash basins/ sinks (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , solar rod stud , solar cat eyes , mirror looking , bib cock brass , tubing gi 20 mm , kitchen sink 24 inch , kitchen sink 37 inch , tubing 15 mm , kitchen sink 7 inch , kitchen rack stainles steel , mirror looking 18 inch , cement , curtain rod , hydraulic door closer , glass shelve , plywood 8 ft , nipple gi 15mm , union socket g i 20mm , european toilet seat , bib cock brass 15mm , door stopper brass , kitchen rack 30 inch , gate valve 25 mm , stop cock brass 15 mm , tee equal gi 15 mm , lock for almirah steel , wc s trap , cover for storage tank , float valve 15 mm with ball , glass shelve 600 mm , steel plate rack , toilet paper holder cp , wire mesh , shower rose cp 15 mm , cat eyes , ply wood 8 ft , particle board prelaminated , gate valve 15 mm , bend gi 15 mm , towel rail , gi elbow gi 15 mm , cp whb mixture 15 mm , waste coupling 32 mm , wire netting 16 mesh , wash hand basin , plywood one side teak face , helicol door spring , sliding door bolt , particle board , nipple gi 15 mm by 100mm , butt hinges , socket gi 15 mm , tower bolt ms 75 mm , union socket 15mm , super flash strip , wash hand basin 400 mm , tower bolt ms 100 mm , ewc p trap , bib cock brass 20 mm , plastic speed braker , sheet glass pane , helicol door spring 150mm , connection pipe pvc size 15mm dia , float valve 20 mm , bow handle , tower bolt 100 mm , pvc adhesive tape , wc indian type , gun metal valve15 mm , gi elbow 20mm , m seal , helicol door spring 300mm length , plug gi 15 mm , pvc adhesive tape 25 mm , hasp stapple , bow handle aluminium 150 mm , handle for almirah , p trap wc , butt hinges ms 100mm , urinal pipe pvc , door handle aluminium 100 mm , elephant shield liquid rubber , ms screw wood 65 mm , glass putty , putty black , cp and bracket corner 20 mm , toilet seat indian style , wash hand basin 40 inch , stop cock pvc , helicol door spring 125mm length , sliding door bolt 200 mm , sliding door bolt ms 250mm , bow handle aluminium 75 mm , tower bolt ms 250 mm , cp soap dish , sliding door bolt ms 300mm , cement 50 kgs each , cement white , paint road marking white , tower bolt alu 75 mm , pvc door seal 900 mm , pvc pipe swr 100 mm , water proofing epobyy rebyin , butt hinges ms 125mm , butt hinges ms 50mm , thiner , pvc pipe swr 75 mm , hasp and stapple alu 75 mm , hacksaw blade , pannel pin 20 mm , panel pin 15 mm , tower bolt ms 150 mm , tee gi reducing , cpvc pipe 15mm , door stopper alu , painting brush 100 mm , hasp and stapple alu 125 mm , floor drain traps , nipple ebytension cp , pvc flebyible waste pipe length 900 mm , painting brush 75 mm , switch fuse unit , rubber washer 15 mm , cp grating with hole 125 mm , oil bond distemper , painting brush 50mm , cp grating with hole 100 mm , tee reducing 15 mm , door stopper double , thread tape white , enamel paint brown , pvc multi floor trap 75 mm , pvc bend 75 mm , pvc multi floor trap 50 mm //bid details 2 / 118

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

corporations/Associations/Others

CTN :45713598

04 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For rate contract for the installation of various types of traffic signals, road warning blinkers and led street lights

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government/Public Sector

CTN :45691474

08 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - miscellaneousllaneous ferrous scrap- coach cutting, ferrous scrap, various types of safety guards, jalies bracket, m.r. tanks, liner, cylinder, dies, punches, almirah, racks, bins, pallets, air maize, car body cyclone fitter, benches, panels, cut pieces of bogie frame and component and machine parts, gear, desk, channel sheet, cut pieces, battery boxes, patties, pipes, pipe fittings, strips, angles, empty drums, wire mesh, wire coils, studs, bars, nut and bolt and other various miscellaneousllaneous ferrous scrap with or without minor non ferrous attachment. ( excluding stainless steel and aluminum ) note: 1. cutting will be allowed. 2. re-punching with other lot will not be allowed. 3. loading will be start at 09.00 a.m. 4. loading after 15.00 hrs. will not be allowed.

Central Government/Public Sector

CTN :45691476

08 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - miscellaneousllaneous ferrous scrap- coach cutting, ferrous scrap, various types of safety guards, jalies bracket, m.r. tanks, liner, cylinder, dies, punches, almirah, racks, bins, pallets, air maize, car body cyclone fitter, benches, panels, cut pieces of bogie frame and component and machine parts, gear, desk, channel sheet, cut pieces, battery boxes, patties, pipes, pipe fittings, strips, angles, empty drums, wire mesh, wire coils, studs, bars, nut and bolt and other various miscellaneousllaneous ferrous scrap with or without minor non ferrous attachment. ( excluding stainless steel and aluminum ) note: 1. cutting will be allowed. 2. re-punching with other lot will not be allowed. 3. loading will be start at 09.00 a.m. 4. loading after 15.00 hrs. will not be allowed.

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45671619

03 Jul, 2026 97.48 Lacs

Baramulla - Jammu And Kashmir

Tender For macadamization of roads at tarzoo,mazbugh,nowpora, sopore town roads by way of providing and laying 75 mm thick wmm,50 mm thick bitiminous macdam and 25 mm thick semidense, 6 mm thic irc type seal coat, road marking strips incld berm filling by way o

By Cities

By States

By Agencies

By Ownerships

By Sectors