Get complete information related to latest Rubber Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Scrap Tenders.
Tender For corrigendum : supply of rubber items of all the circle of ctpp, chhabra - silicon rubber gasket for victaulic coupling v-22h for 559mm coal pipes suitable for temperature range of 160 c to 180 c & width=36mm , od=640mm, thickness=7.5mm, shore hardness=55 to 60, rubber spider (lovejoy make), l-70, l-95, l-100, l-110, l-150, l-190, sw-095, sw-110, sw-150, sw-150, sw-190, sw-295 (01 set = 06 nos.), rrj-38, rrj-24, sw-110, f-190, rrs-150/140, rrs-150/110, rrl-100/110, rrs-190/140, rrs-225/140, tyer flex t-5b202, rrl-110/100, rrl-100/100, rrl-100/140, rrs-110/100, rrs-110/140, rrs-100/140, epdm rubber sheet ,size 01meterx10meter,shore hardness 55to 65,temprature resistance up to 250c, rubber exp. below id 40mm od 50mm length 125mm (as per sample), rubber pad for belt scraper size width 75mmxthick12mmxlength 1090mm with hole as per sample, grommit rubber (as per sample), rubber gasket for front door size outer dimension l 1450xh 550 inner dimension l 1380xh 480 thickness 20mm(as per sample), rubber gasket for side door size outer dimension l 840xh 520 inner dimension l 760xh440 thickness 10 mm (as per sample), rubber gasket for front door size outer dimension l 1450xh 545 inner dimension l 1390xh 485 thickness 20mm(as per sample), rubber gasket for side door size outer dimension l 830xh 460 inner dimension l 766xh 396 thickness 6 mm (as per sample), rubber bush, rubber bush (size id x od x wide), rubber bush of following lovejoy make coupling, 10.0 mm id x 22.5 mm od x 28.00 mm length, 10.0mm id x 22.5 mm od x 22.5 mm length, 25.0 mm id x50.0 mm od x 10.00 mm length, 12.0 mm id x25.0 mm od x25.0 mm length, 10.0 mm id x24.0 mm od x30.0 mm length, rb-116-4/1, rb-252/2rb-252/1, neoprene rubber cord (squire) (hardness 60 5 shore a, tensile strengh 13 mpa, elongation 350%, abrasion - 160 mm operating temp = -30 c to 120 c, bs2752) (qty. in mtr.), 10x10mm sq., 8x8mm sq., endless 100 % silicon rubber o ring (nos.) (hardness 60 5 shore a, tensile strengh 13 mpa, elongation 350%, abrasion - 160 mm operating temp = -30 c to 120 c, as per bs2752, size id 263mmxod 287mmx12mm thick, size id255 mmxod 269 mmx7 mm thick, size id250 mmxod270 mm x10mm thick, size id200 mmxod224 mm x12mm thick, size id192 mmxod204 mm x6mm thick, size id91.44 mmxod102.1 mm x5.33mm thick, size id135 mmxod 147 mmx6 mm thick, size id260 mmxod270 mm x5mm thick, size id217 mmxod227 mm x6mm thick, size id199.2 mmxod210.6 mm x5.7mm thick, size id169.2 mmxod180.6 mm x5.7mm thick, size id205 mmxod215 mm x5mm thick, 100 % pure viton rubber cord for turbine (round ) of diameter, 8mm, 4 mm, 5mm, 6mm, 100 % pure neoprene rubber cord (round) (in meters) (hardness 60 5 shore a, tensile strengh 13 mpa, elongation 350%, abrasion - 160 mm operating temp = -30 c to 120 c, as per bs2752, 1mm, 1.5 mm, 2mm, 2.5 mm, 3 mm, 3.5mm, 4 mm, 4.5 mm, 5 mm., 5.5 mm., 6mm, 6.5 mm., 7mm, 8 mm., 10 mm., 12mm, neoprene rubber sheet (hardness 60 5 shore a, tensile strengh (13mpa), elongation min 350% abration 160mm3 temp -30to 120 deg c, bs2752 following thickness, 1 mm, thk, 2 mm, thk, 3 mm, thk, 5 mm, thk, 6 mm, thk, 8 mm, thk, 10 mm, thk, neoprene rubber (hardness 60 5 shore a, tensile strengh 13 mpa, elongation 350%, abrasion - 160 mm operating temp = -30 c to 120 c, as per bs2752) disc / washer and other item following size, rubber disc id= 4 mm, od= 42mm, thk= 4.83mm, rubber disc id= 5mm, od= 74mm, thk= 8mm, rubber disc id= 5mm, od= 82mm, thk= 8mm, rubber disc id= 5mm, od= 96mm, thk= 8mm, rubber disc id= 5mm, od= 52mm, thk= 6mm, rubber disc id= 6mm, od= 94mm, thk= 9.8mm, rubber gasket id= 55mm, od= 62mm, thk= 2mm, rubber gasket id= 62mm, od= 72mm, thk= 2mm, rubber gasket id= 82mm, od= 96mm, thk= 2mm, rubber gasket id= 92mm, od= 104mm, thk= 2mm, rubber gasket id= 108mm, od= 120mm, thk= 2mm, endless 100% neoprene rubber o- ring (hardness 60 5 shore a, tensile strengh 13 mpa, elongation 350%, abrasion - 160 mm operating temp = -30 c to 120 c, bs2752) following in size, id=90mm, od=106 mm,thick= 8mm
Tender For auction sale of u/s crusher hammer / screen plates scrap,grinding roller of pulveriser,u/s bullring segment scrap,u/s conveyor roller with rubber linng scrap,u/s rail wagon and loco material scrap,u/s stainless steel scrap,u/s coal pipe and bend with ceramic lining scrap,u/s ms scrap burner with ss tip,u/s measuring instrument/meters relay scrap,u/s mixed conveyor belt scrap(roll),u/s mixed conveyor belt scrap(cut piece),u/s jerry cane/drum plastic 50ltr empty
Tender For supply of spare components and replacement of damaged components in induced draft pultruded frp counter flow cooling tower at heavy water plant (kota) site. - supply of pvc film fill block of size 6 x2 x2 ., supply of square channels of pultruded frp material of size (width/height x thickness x length): 4 inch x 1/4 inch x 24 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 4 inch x 1-1/8 inch x 1/4 inch x 18 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 6 inch x 1-5/8 inch x 1/4 inch x 18 feet., supply of complete partition sheets (frp sheets) of adjacent cells and replacement of existing partition sheets. sheet thickness: 3 mm. fasteners for installation of sheet shall be arranged by contractor., supply of hex head gi bolts with hex nut. size: m12 x 130 mm long., supply of self threading screws having hex head. size: dia 5 mm x 60 mm long., replacement of old neoprene rubber seal/grommet for distribution pipe with new seal/grommet (spare neoprene rubber seal/grommet shall be provided by dept.)., replacement of damaged water distribution nozzles with new nozzles (fasteners and gasket shall also be replaced) (spare nozzles along with fasteners and gasket shall be provided by dept.)., replacement of damaged pvc film fill blocks of size 6 x2 x2 with new fills blocks (for 410 nos. fills, spare pvc film fill sheets shall be provided by dept., contractor shall prepare fill blocks by corrugating, arranging adhesive, application of adhesive and assembly). scrap fills shall be shredded into pieces, packed in bags and shifted to designated place., replacement of damaged pvc drift eliminators with new pvc drift eliminators. (spare c type drift eliminators along with spacers shall be provided by dept., contractor shall assemble the drift eliminators)., removal, cleaning/de-choking and re-installation of water distribution nozzles., repair of leaky joints of outer frp sheets of cells by aligning sheets, jointing with fasteners and providing frp lining on joints from inside/outside. frp lining shall be of four chopped mat and two surface mats laminated with resin for 4 mm thickness., internal structural maintenance of main header, branch pipes, fill supports, main structural members of ct cells etc by replacing/providing square channels/c-channels etc supplied at sr. no. 2, 3 & 4 above.
Tender For custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possible. 5. collect