Seat Tenders

Corporations/Associations/Others

CTN :45482408

16 Jun, 2026 NA

Badlapur - Maharashtra

Tender For providing beautification work ac seating area create granth dalan reading area in aard at gadima apt in sharad pawar granthalay in ward no 30 in kbmc area

Central Government/Public Sector

CTN :44514374

11 Jun, 2026 NA

Delhi - Delhi

Tender For bid to ras corrigendum : supply of plumbing items : : - actuation assembly mechanical , lynk faceplate polished chrome , riviera iwt faceplate mechanical cp , flush valve assembly , fill valve in wall tank , hinge assembly left tok , paper tissue holder , battery box assy sp , control stop assembly , mounting hardware , flush valve a2604 and seat assy , control assy , fill valve cj101 3l 6l , gasket tank outlet , flush valve lock strip , fill valve diaphragm , seal rubber , flush valve link assembly , filter , urinal sensor , control asm , inlet hose , flexible waste pipe , health faucet , soap dispensar , wc seat cover , kohler lynk pneumatic dual flush faceplate , urinal flush valve , cubical knobs , hand dryewr , pillar cock , floor trap , touchless soap dispensor

Central Government/Public Sector

CTN :45479217

10 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.g ov.in/vendtendordetnew.php using key: 0726tzw9sfg1944 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45475338

11 Jun, 2026 NA

Gondia - Maharashtra

Tender For supply of construction materials - name of items, cements isi marks 53 gread (acc), cements isi marks 53 gread (birla gold), cements isi marks 53 gread (ultratech), stell isi mark (6 mm), stell isi mark (8 mm), stell isi mark (10 mm), stell isi mark (12 mm), stell isi mark (16 mm), stell isi mark (20 mm), 6 mm metal crusher broken, 12 mm metal crusher broken, 20 mm metal crusher broken, 40 mm metal crusher broken, 40 mm metal hand broken, 80 mm metal hand broken, soil bricks is type std size, cement bricks is type std size, sand, murum with royalty, murum transporting, tiles (ceramic, glezz tiles and verified tiles), oil paint, lime, gsb, carting of wate material, m.s.door, m.s.window, ventilator, 2x1.5mm frlsh copper wire, 2x2.5mm frlsh copper wire, 32 mm pvc truncking wire, 32amp mcb, 6 way board, isolater, metal clad distribution board 6 way, ceilling fan, regulator, metal clad distribution board 8 way, switch, plug socket, 3 pin socket, urinal pan women, urinal pan men, wash basin, camode toilet seat, pvc pipe (110mm), syntex (500ltr), nahni trap, tap, hume pipe septic tank, pvc pipe(20mm), vibratory roller 8 t0 10 tones, rcc soak pit tank (o.60mtr dai x 0.90 mtr ht with cover, information board, distemper, paving blocks, pvc pipe 75 mm dia. isi mark1, np-2 second class 1000 pipe with collars, np-2 second class 800 pipe with collars, np-2 second class 600 pipe with collars, np-2 second class 450 pipe with collars, gi pipe, latrine sheet, tar, soil, mixture machine rent, rolar machine, jcb, water tankar, centring

State Government

CTN :45475340

10 Jun, 2026 NA

Gondia - Maharashtra

Tender For supply of construction materials - name of items, cements isi marks 53 gread (acc), cements isi marks 53 gread (birla gold), cements isi marks 53 gread (ultratech), stell isi mark (6 mm), stell isi mark (8 mm), stell isi mark (10 mm), stell isi mark (12 mm), stell isi mark (16 mm), stell isi mark (20 mm), 6 mm metal crusher broken, 12 mm metal crusher broken, 20 mm metal crusher broken, 40 mm metal crusher broken, 40 mm metal hand broken, 80 mm metal hand broken, soil bricks is type std size, cement bricks is type std size, sand, murum with royalty, murum transporting, tiles (ceramic, glezz tiles and verified tiles), oil paint, lime, gsb, carting of wate material, m.s.door, m.s.window, ventilator, 2x1.5mm frlsh copper wire, 2x2.5mm frlsh copper wire, 32 mm pvc truncking wire, 32amp mcb, 6 way board, isolater, metal clad distribution board 6 way, ceilling fan, regulator, metal clad distribution board 8 way, switch, plug socket, 3 pin socket, urinal pan women, urinal pan men, wash basin, camode toilet seat, pvc pipe (110mm), syntex (500ltr), nahni trap, tap, hume pipe septic tank, pvc pipe(20mm), vibratory roller 8 t0 10 tones, rcc soak pit tank (o.60mtr dai x 0.90 mtr ht with cover, information board, distemper, paving blocks, pvc pipe 75 mm dia. isi mark1, np-2 second class 1000 pipe with collars, np-2 second class 800 pipe with collars, np-2 second class 600 pipe with collars, np-2 second class 450 pipe with collars, gi pipe, latrine sheet, tar, soil, mixture machine rent, rolar machine, jcb, water tankar, centring

State Government

CTN :45490320

16 Jun, 2026 10.00 Lacs

Dhule - Maharashtra

Tender For constructing seating arrenegment for amardham premises at village mauje nagaon tal. dhule dist. dhule (gp/2526/0426) - under 2515 1882 jansuvidha yojana 2025-26

Central Government/Public Sector

CTN :45339546

03 Aug, 2026 NA

Mysore - Karnataka

Tender For supply and installation of one coach set of seats and berth complete(hl3) for lwscwac/eog coaches to drg. no. lwscwac/eog-6-1-001,alt- j, col-i. (except item13) with upholstery colour alnac-03. cushioning material shall be pu foam as per rdso specification no.rdso/2007/cg04, rev-01 or latest and upholstery to rdso spec.rdso/2008/cg-07 rev-01 or latest. for thickness of cushion refer drawing 593-6-1-042,alt-e. installation required as per arrangement drawing. all necessary hardwares required for installation is under scope of the supplier. note: firm has the option for offering seats and berths cushion with lower density of 65 plus or minus 5 kg/m3 conforming to spec.rdso/2007/cg-04, rev-01 or latest also. [ warranty period: 120 months after the date of delivery ] ]

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45490995

18 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply, installition/arrangement of various construction, supply, installation, of various components/items viz, pedestal inauguration/foundation, shamiyana, seating arrangement, etc. stone for inauguration/foundation stone laying ceremony of variou

Central Government/Public Sector

CTN :45488088

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of ferrous scrap released material such as: (1) brake beam icf, qty=01 no.=25 kg. (2) c.i. valve, qty=07 nos.=4.2 kg. (3) dashpot spring 16 ton, qty=07 nos.=161 kg. (4) feed pipe, qty=36 nos.=36 kg. (5) brake pipe, qty=40 nos.=40 kg. (6) passenger emergency alarm device, qty=01 no.=01 kg. (7) angle cock, qty=29 nos.=43.5 kg. (8) g.m wheel valve 40 mm, qty=19 nos.=15.2 kg. (9) flushing valve, qty=12 nos.=9.6 kg. (10) gravity cock, qty=728 nos.=36.4 kg. (11) shock absorber, qty=02=14 kg. (12) drain cock, qty=18 nos.=10.8 kg. (13) isolating cock, qty=01 no.=0.8 kg. (14) g.i. pad lock off size, qty=31 nos.=15.5 kg. (15) fire extinguisher, qty=74 nos.=133.2 kg. (16) pressure gauge of size, qty=15 nos.=1.5 kg. (17) distributor valve for icf, qty=01 no.=25 kg. (18) door closer, qty=25 nos.=20 kg. (19) swinging nut, qty=51 nos.=51 kg. (20) swinging link pin, qty=69 nos.=172.5 kg. (21) flex ball cable, qty=05 nos.=10 kg. (22) step complete mounting (foot step), qty=05 nos.=80 kg. (23) rotary lock lift, qty=02 nos.=4 kg. (24) installation lever, qty=32 nos.=9.6 kg. (25) control arm top with bush, qty=02 nos.=116 kg. (26) primary bump stop, qty=29nos.=1.45 kg. (27) lavelling valve, qty=05 nos.=5 kg. (28) dump valve, qty=08 nos.=6.4 kg. (29) axle end cover, qty=17 nos.=34 kg. (30) centering disc lower & upper, qty=08 nos.=08 kg. (31) modified cbc restrictor, qty=02 nos.=10 kg. (32) empty iron drum capacity 210 ltrs, qty=20 nos.=320 kg. (33) empty iron drum capacity 20 ltrs, qty=120 nos.=120 kg. (34) axle box pivot bush, qty=03 nos.=45 kg. (35) nut & bolt etc, qty=700 kg. having local lot no. dhn/2026/86. location:- blacksmith room near c&w/store/dhn.

By Cities

By States

By Agencies

By Ownerships

By Sectors