Shearing Machine Tenders

CTN :45511978

23 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For introducer size 3.0 , proseal laryngeal mask airway with gastric suction port with introducer size 4.0 , proseal laryngeal mask airway with gastric suction port with introducer size 5.0 , quincke spinal needle 26g 90mm , skin disinfectant 100 gm isoproponol 63 gm, benzalkonium bott of 500 ml , spray diclofenac analgesic , spray lignocaine topical aerosol lox 10 spray , spinal needle size- 25 26 g 25 each size , sterile swab stick , sterile urine containers 50 ml , suction catheter s-12 fr , suction catheter s-14 fr , suction catheter s-16 fr , suture monocryl 3-0 cutting body , suture polyamide monofilament 2-0 cb , suture polyamide monofilament no 1 cb , suture polydioxanone loop no 1 rb , suture vicryl 2by0 rb , suture vicryl rapid 3-0 cutting needle 26 mm , usg guided plexus block needle - sono plex 21g x 100mm , usg guided plexus block needle - sono plex 21g x 50 mm , usg guided plexus block needle - sono plex 22g x 100mm , usg guided plexus block needle - sono plex 22g x 50 mm , usg guided plexus block needle - sono plex 22g x 75mm , central line dressing , et tube pvc micro cuff size 8.5 with cuff , et tube reinforced cuff size 3 with cuff , et tube reinforced cuff size 3.5 with cuff , et tube reinforced cuff size 4 with cuff , et tube reinforced cuff size 4.5 with cuff , durapore 1 inch , durapore 3 inch , chlorinated lime with boric acid , skin stapler removal , bain cercuit paed , foleys catheter silicon two way s-12f , foleys catheter silicon two way s-14f , foleys catheter silicon two way s-18f , closed wound suction set s-8 , closed wound suction set s-10 , warming blanket paediatric , transducer hand piece compatible with gen-11 generator hp054 , laparoscopic probe 36cm compatible with gen-11 generator har 36 , ace coagulating shears 23cm ergonomic compatible with gen-11 generator har 23 , sterofundin iso 500ml , tubal ring for laproscopic sterilization , tegaderm , disposable irrigation aspiration bimanual han piece , disposable ophthalmic surgical crescent blade , disposable ophthalmic surgical 15 degree side port blade , disposable ophthalmic surgical 2.8 mm keratome blade , double bevel, 15 degrees, opthalmic blade 2.8 mm grip , double bevel, 45 degrees, sterile disposable opthalmic blade 2.8 mm grip , endo loop sterilized suture catgut ,pre-knotted ligature for endo surgery , ryles tube size 14 , ryles tube size 16 , ryles tube size 18 , disposable sterile endoscopic camera cover 25 cm x 2.5 mt , absorb surgi suture polyglactin 36mm, 1by 2 circle reverse cutting double needle adult bougie, band aid , battery aa, battery aaa, battery for glucometer, battery rechargable aa, battery rechargable aaa, catheter suction endo bronchial with terminal pvc tubing 08 fg 50 cms , catheter suction endo bronchial with terminal pvc tubing s16 fg l50 cms , central venous catheter 7.0 fg -(16 cm) triple lumen seldinger needle, condom drainage, corn cap pkt of 4 pieces, bp cuff for digital bp apparatus, disinfectant powder contains oxone dodecylbenzenesulfonate, sulfamic acid, disinfectant contains 1,6 dihydroxy 2.5 dioxyhexglutaralde,benzalkonium , disposable cautery lid, disposable circuit ventilator adult, disposable laryngoscope size 4, disposable y patient circuit, electrocautery pencil for medilap 400 mfu, epidural epi-fix , test card with creatinine & calcium for abg machine, gum elastic bougie, hme filter, i gel size 1, i gel size 1.5, i gel size 2, i gel size 2.5, i gel size 3, i gel size 4, inhaler budesonide 100mcg, inj carbetocin 100mcg/ml, inj ropivacaine hydrochloride in dextrose heavy 0.75% 4ml, inj suggamadex 100mg/ml 2ml, intralipid 20% //bid details 2 / 82

Central Government / Public Sector

CTN :45454970

13 Jun, 2026 NA

Chittoor - Andhra Pradesh

Tender For supply of one set of spares, consisting of 06 items suitable for the hydraulic guillotine shearing machine, as detailed in the attached annexure-a. model: kghv-31/16, make: kawa [ warranty period: 30 months after the date of delivery ] ]

CTN :45430805

15 Jun, 2026 NA

Salem - Tamil Nadu

Tender For purchase of laboratory vane shear apparatus - purchase of laboratory vane shear apparatus (asper specification)

CTN :45422799

30 Jun, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of basic cost of shearing machine (double column guillotine shearing machine) as per technical specifications m/246/1/14/25-26/m&p/sm dt. 08.09.2025. [ warranty period: 30 months after the date of delivery ] ]

CTN :45416078

30 Jun, 2026 NA

Cuttack - Odisha

Tender For supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

CTN :45371509

10 Jun, 2026 1.48 Lacs

Kanyakumari - Tamil Nadu

Tender For purchase of lab items for civil dept. - purchase of lab items for civil dept., direct shear machine, auger boring machine (motorised), flow table apparatus for concrete with accessories

State Government

CTN :45342664

10 Jun, 2026 NA

Itanagar - Arunachal Pradesh

Tender For purchase of equipment for the department of civil engineering- dslr camera, (ultra wide angle ins) with stand and carry, thutte camera, roadometer with folding stand and carry bag, sound level meter, noise measure, device, sieve shaker, ucs test apparatus digital , automatic cbr test apparatus , digital , automatic direct shear test apparatus , digital , gl pipe threading machine , manual pipe threader

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

Central Government / Public Sector

CTN :45339150

02 Jun, 2026 NA

Chittoor - Andhra Pradesh

Tender For supply of one set of spares, consisting of 06 items suitable for the hydraulic guillotine shearing machine, as detailed in the attached annexure-a. model: kghv-31/16, make: kawa [ warranty period: 30 months after the date of delivery ] ]

CTN :45235126

26 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - lot no.nws/guillotine shearing machine/05/26-27/10 description- condemned guillotine shearing m/c no. 23sh/44, make-m/s. wilhelmburger machine fabok hinrches, west germany with motor, 30kw (45 hp), starter and main switch = 1 no. materials to be sold "as is where is basis". note: (a) before bidding the bidders are requested to inspect the lot and approach road etc. (b) cutting will be allowed in presence of consignee or his authorised representative. (c) purchaser should undertake that the activity of gas cutting and dismantling is not any way to affect the railway daily work or endanger railway property or rly workers lives. (d) delivery will be in weight basis. (e) loading will be done by purchaser own arrangements under supervision of witnessing concern official only after entire dismantled of the machine. (f) if any excess quantity found of this lot the purchaser will return to custodian. (g) if any shortage of materials the value will be return to purchaser. (h) weighment of truck i.e. tare & gross has to be done electronic weigh bridge at amm/r-yard/kgp. (i) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (j) sse (w-mc)/shop-44/kgp electrical maintenance to ensure electrical or any other permission before cutting & delivery related to safety matter.(k) if any oil content found that to be safely decanted by the purchaser and return to consignee. (l) other terms & conditions are as per e-auction condition.

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government / Public Sector