Steel Furniture Tenders

Central Government/Public Sector

CTN :40439932

13 Jun, 2025 24.97 Lacs

Delhi - Delhi

Tender For tender for supply of furniture for wards etc offices at nrch in the so ssewnrch under aden nrch - apo high back revolving chair , apo revolving chair , apo revolving chair with arm , apo visitor chair , apo visitor chair , apo mid back revolving chair , apo executive table with eru 1800mm x 750mm x 750mm , apo executive table with eru 1500mm x 750mm x 750mm , apo executive table 1500mm x 750mm x 750mm , apo computer table 1200mm x 610mm x 750mm , apo wooden book case , apo steel almirah , sofa set 3+1+1 , sofa set 3+1+1

State Government

CTN :40428102

31 May, 2025 NA

Thane - Maharashtra

Tender For design installation and maintenance of educational lab - vocational lab; supply and installation of hardware, furniture, at collector office thane; buyer-1 additional collector cabin provide of chair and sofa & storage, 2 deputy additional collector provide for chair and sofa storage dining table, 3 retigat branch provide for storage, chair, 4 depty collector cabin provide for chair and sofa, storage , tpoy dinig table , dustbin cupset, 5 nodni branch provide for chair table, storage., 6 tahsildar mahsool branch provide for sofa chair & tpoy & dinig table & book case., 7 karmnuk branch provide for chair, table, storage., 8 niyogen bhavan hall provide for chair ,, 9 adhar kendra provide for chair ,table, storage.10 land acquification branch provide for chair table & storage, 11 design and supply fabrication and fixing ss non/gl are multiginiual brallie ( raised dots plate ) 6267., 12 samrudhi branch supply of chair , storage..

corporations/Associations/Others

CTN :40444039

29 May, 2025 NA

Ahmedabad - Gujarat

Tender For auction sale of mavdi msc_scrap chair,madhapar msc_2x2 gibs led faulty light,surat_cctv dome camera,madhapar msc_pac outdoor stand&battery bank ms iron,surat_smoke detector,surat_coolant filter,astron park_power capacitor,surat_power capacitor_25kva,rajkot madhapar_2x2 led faulty light /led flood light,surat_dg air filter,madhapar msc_pac copper pipe scrap,changodar_flexible/armould copper cable cut piese_2.5mm

Central Government/Public Sector

CTN :39519903

16 Jun, 2025 3.45 Lacs

Ambala - Haryana

Tender For corrigendum : cwe/af amb/sar-72/2024-25 provn of furnitures items for sg sarsawa and for dog kennel at sarsawa under ge (af) sarsawa - notice board (900mm x 600mm)fd-366, chair cb (office) with armfd-75, chair easyfd-229, peg table (450mm x 300mm x 380mm)fd-277, almirah medium steelfd-243, table officers (steel)fd-1003, couch-examination-massagefd-122, receptacle(pvc), capacity 20 litrefd/e6/map/13 make:- cello, brite, neel kamal, supreme, screen movable (steel)fd-83, rack steel (1830mm x 760mm x 1905mm)fd-129, stool revolving (adjustable)fd-1026, locker steelfd-1029, charpoy gi pipe with ply top and mnf setfd-220, pegs (set of six)fd-80, bed stead fowler (type-i)hfd-2002, bed stead iron hospitalhfd-2001, form with back (steel)fd-78, bed hard fd/e6/map/08(r ), table clerk (steel)fd-1004, table computerfd/e6/map/03, chair computerfd/e6/map/01

corporations/Associations/Others

CTN :40390431

21 Jun, 2025 184

Bengaluru - Karnataka

Tender For tender for the supply and installation of dialysis unit under turnkey basis at esi hospitals indiranagar, mysore and hubli - esi hospital civil work hubli.,, esi hospital civil work mysore.,, esi hospital civil work indiranagar.,, biocarb mixing unit, dialysis reprocessing unit, scrub station ss, foot step double, bio-medical waste bins, television , digital bp appratus.,, electronic suction, needle syring destroyer, sthethoscope, glucometer with strips.,, drug trolley/medicine cart.,, dressing trolley.,, crash cart.,, wheel chair, defibrillator.,, ambu bag, thermometer infrared.,, laryngoscope with blades, syringe pump.,, multiparameter monitor, ro plant system 500lph, hemo-dialysis machine, iv stand.,, overbed counter, bedside locker.,, dialysis chair/ bed with mattress with load cell - esi hospital civil work hubli.,, esi hospital civil work mysore.,, esi hospital civil work indiranagar.,, biocarb mixing unit, dialysis reprocessing unit, scrub station ss, foot step double, bio-medical waste bins, television , digital bp appratus.,, electronic suction, needle syring destroyer, sthethoscope, glucometer with strips.,, drug trolley/medicine cart.,, dressing trolley.,, crash cart.,, wheel chair, defibrillator.,, ambu bag, thermometer infrared.,, laryngoscope with blades, syringe pump.,, multiparameter monitor, ro plant system 500lph, hemo-dialysis machine, iv stand.,, overbed counter, bedside locker.,, dialysis chair/ bed with mattress with load cell

State Government

CTN :40443689

30 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of kit box, cot iron, plastic chair, locks, tent 180, mobile plastic bathroom, barber wire, desert cooler, pedestal fan, photo copy machine, water cooler, exchaguard electric road, generator battery, starter, stablizer tv, wall clock, pen drive, poly carbonate shield, bhim balance with channel, high jump war seal, stop watch, care mate, token, rope lining, swimming rope, sports shoes, volleyball net, plastic tuckies, plastic bucket items etc. term/non term and (b) quotation charges items like steel carrier iron, hza box iron, m.s. box iron, wooden chest insas rifle, wooden chest slr, carbain, ak-47, wooden chest-12 bore 4x4 etc.

Corporations And Associations And Others

CTN :40351350

27 May, 2025 1.56 Crore

Delhi - Delhi

Tender For supply and installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

CTN :39542196

24 May, 2025 NA

Bathinda - Punjab

Tender For bid to ras supply of plywood 1990mm x 910mm x 12mm thick , pu foam cushion of size 530 x 560x 100mm covered , pvc seat for chair dining 4mm , pvc seat and back for chair verandah 4mm , ms nuts with bolts 75mm long shank 6mm thick , ms nuts with bolts 38mm long shank 6mm thick , adhesive sh for furniture , pu foam cushion cover

CTN :40384593

07 Jun, 2025 NA

Dimapur - Nagaland

Tender For establishment of computers - all in pc i3 processor 8 gb ram 512 gb ssd with keyboard mouse , ups 600 va , computer table , cushion chair , colour printer for a4 size , projector , projector screen , linoleum mat , infrastruture upgradation

By Cities

By States

By Agencies

By Ownerships

By Sectors