Survey Equipment Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

corporations/Associations/Others

CTN :45602147

04 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; power house equipment, power generators, overhauling & servicing of fsss,sadc system,c&i field instruments(boiler,turbine, generator & cw system) and tur..

corporations/Associations/Others

CTN :45725163

14 Jul, 2026 15.49 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of silica gel breather metallic body , epoxy resin cast insulator , electrolyte copper transformer stud with brass chuck nut and nut with washer , insulator point 4kv , flexible link for service transformer , led tube light with batton 1x20w , tb 100a for ldb , 200w led flood light complete fitting led driver based , 110 w led flood light , 70w led flood light complete fitting led driver based , 40w led high bay complete fitting , mcb 20a sp , 15 amp socket , 15 amp switch piano type , 5a socket , 5a switch , mcb 63a 4p , digital multi meter digit display , hrc fuse 2 amp ns type , hrc fuse 4amp ns type , hrc fuse 6amp ns type , hrc fuse 10amp ns type , hrc fuse 16amp ns type , hrc fuse 63amp ns type , portable digital megger test voltage , supply changeover switch 415v , contactor coil 220v dc , aux contactor mm00 coil 240v ac 10a 415v , 415kv ac terminals cs735 , main switch 3 pole 63a 415v , tong tester including ac dc current , led display type tong tester , clamp for primary injection kit material , ac volt meter for station transformer 30 mva , 3 tf 4772- 0af0 power contactor 70 amp , aluminium platform step ladder of total extended height of 8 feet , 2 legged ladder 6 point 3m , 4 legged ladder 4 m , vernier caliper 150mm , standard tool box with case and total included minimum 132piece , bosch model gsb 600 corded electric impact drill , bosch model no gws 6 , bosch gbl 650 professional blower , bench vice for mech , bosch 200 mm file set , dowell make copper lug following size ring type , ferrule sleeve , black ink ribbon compatible for ferrule printing machine max letawin , aa rechargeable battery and charger , u clip gems clip 01 set include following , push button station with 2no control blocks , current transducer secure single function ac current transducer , voltage transducer , active power transducer

CTN :45709597

01 Jul, 2026 NA

Chamba - Himachal Pradesh

Tender For restoration of rain damages to lis barla trimble in tehsil bhattiyat distt. chamba h.p. (sh:- providing and fixing c.g.i. sheet roofing for existing sump well at barla )

CTN :45708339

29 Jun, 2026 NA

Surat - Gujarat

Tender For repair of petrol operated power chain saw machine ms 230, vimal, electric chain saw, petrol generator 2kv machine received, total number-09 machines

Central Government/Public Sector

CTN :45702822

06 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap cond: dismantling/abandonment of old esm duty room, old station building, old waiting hall, old cable hut, old el building (old relay, ips, battery room), consisting of rcc. brick masonry, doors and window rails, steel, wood, ac sheets total qty 5 nos s/building. these quantity are only indicative 1) brick masonry approximate qty 146.10 mm¿ 2)wood 6.70 m3, approximate 3) steel, 2301.12 kg approximate 4)r.c.c. only 28.15 m3 approximate 6) gi sheet. 217.24 m2 approximate, 7) wooden/steel door/windows 26 nos approximate. remarks 1. any other material found nearby the lot &t will not be delivered. 2. delivery will be given on as is where is bases by lot. 3. it is strictly advised to bidder to see the lot personally before biding for the lot, any dispute about quantity will not be considered after bidding 4. cutting dismantling may be allowed for easy loading purpose at the cost and risk of purchaser 5. dismantling permitted up-to ground level only. 6. purchaser should ensure that during cutting dismantling nearby structures building should not be affected. 7. purchaser will be fully responsible for any mishaps. 8. train operations and other railway work should not be disturbed and suitable banners at work, place has to be arranged by purchaser. 9. alter delivery complete removal of rcc, cc, bricks masonry and rubbish from site will be permitted. 10. the land should be cleared of all debris. 11. all pway material, s&t and electrical materials, fencing, fencing gates items are returnable items which are not included in auction and not permitted to take along with other auctioned items all returnable items which can be transported to depot will be submitted in depot.

Central Government/Public Sector

CTN :45714979

17 Jul, 2026 NA

Multi City - Multi State

Tender For supply of design, supply at site, installation, testing & commissioning of 13 person capacity (884 kgs.) lift total 2 nos. (location: mettupalayam railway station), machine room less, gear less traveling from ground floor to first floor with microprocessor-based vvvf control, automatic rescue device suitable for operating on 3 phase 440v, 50 hz ac supply and as per the cpwd specification part iii for lifts and escalators-2003 with latest amendments if any, and technical specification as per annexure i. items to be supplied by oem and authorized dealers of oem along with authorization letter. warranty period is 24 months from the date of commissioning or 30 months from the date of supply, whichever is earlier. downtime clause is applicable as per attached documents[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45702749

06 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For auction sale of pway scrap - ci scrap from lc gate with fitting materials etc. consists of ,1] counter weight for lc boom square type - 34 nos, 2] boom wheel - 21 nos, 3] weight plate for boom -11 nos, 4] lb boom bracket - 46 nos, 5] lever box for lc - 3 nos, 6] boom weight alignment round type i - 9 nos, 7] boom weight alignment round type ii - 67 nos, 8] boom weight alignment round type iii - 77 nos, 9] counter weight for lc boom round type - 9 nos, 10] winch stand ci - 4 nos, 11] boom axle - 47 nos. - total qty - 7.264 mt as is where is basis, [condemned, unserviceable, released, class - iii], custodian : sr. section engineer/p.way/nagercoil[ncj]., s.1539 no.593649 dtd.15.09.2025, location : sengulam [sglm] station km 349/500 - 600 (rh side) between nagercoil [ncj] - tirunelveli [ten]., note : 1] delivery to be made on actual weighment basis. 2] purchaser by engaging his own labourers or mechanical mode, is permitted to load and hand over the non - ferrous and excess quantity to the custodian., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable., 3) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : 1] nfs as per tms jsos & ds 8. [pl no. 98080076, hsn code : 720429, gst : 18 % on fcm], item : ci items on weight basis. [image attached].

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government/Public Sector

CTN :45702750

06 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For auction sale of pway scrap - ms scrap of lc gate with fitting materials etc. consists of 1] lc gate boom type i- 29 nos, 2] lc gate boom type ii - 28 nos, 3] lc gate boom type iii - 10 nos, 4] lc gate boom type iv - 11 nos, 5] ms rod 32 mm - 62.97 metre - 13 nos, 6] fringes for lc boom - 18 nos, 7] stay rod for lc - 12 nos, 8] winch cover for lc - 3 nos, 9] swing gate for lc - 4 nos, 10] lc stop board - 23 nos, 11] boom meeting post for lc gate - 15 nos, 12] lc gate lamp stand - 20 nos, 13] lc gate bell alignment - 13 nos, 14] turn out wheel double - 11 nos, 15] turn out wheel single - 8 nos, 16] boom stand type-i - 3 nos, 17] boom stand type-ii - 12 nos, 18] boom stand type-iii - 15 nos, 19] winch for lb gate - 11 nos, 20] bush for shaft - 19 nos, 21] boom shaft - 26 nos, 22] winch shaft - 21 nos, 23] ms angle - 5.43 metre - 2 nos. - total qty - 10.649 mt as is where is basis, [condemned, unserviceable, released, class - iii], custodian : sr. section engineer/p.way/nagercoil[ncj]., s.1539 no. 593648 dtd.15.09.2025, location : sengulam [sglm] station km 349/500 - 600 (rh side) between nagercoil [ncj] - tirunelveli [ten]., note : 1] delivery to be made on actual weighment basis. 2] purchaser by engaging his own labourers or mechanical mode, is permitted to load and hand over the non - ferrous and excess quantity to the custodian., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable., 3) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : 1] nfs as per tms jsos & ds 8. [pl no. 98057054, hsn code : 720429, gst : 18 % on fcm], item : ms items on actual weighment. [image attached].

By Cities

By States

By Agencies

By Ownerships

By Sectors