Tool Tenders

Central Government/Public Sector

CTN :45683014

07 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For corrigendum : supply of special tool kit for keo type dv. consisting of 9 items as per annexure a attached. (1) diaphragm tools4a-54802-6 nos. (2) assembly punch4a-93186-6 nos. (3) trust pipe 4a-54803-6nos. (4) wrench 4a-47440-4nos.(5) adjustment tool 4a-59318-4nos. (6) wrench tool 3kb 3349-5nos. (7) installation tool 4b 64617-6 nos. (8)assembly wrench 4b 43263-5nos. (9) holding fixture ta1516-1nos. (one set consist ofitem no. 1 to 9) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736867

21 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of splice for 129 sq.mm catenary, as per c. rly.elect/trd drg. no.fm/dc-ac/4 attached. [warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

State Government

CTN :45732694

02 Jul, 2026 NA

Jhajjar - Haryana

Tender For tender for motor overhauling and fitting charges/over hauling charges / at w/w gochi ,carriage of material from source to destination complete in all respect. /material carriage from source to destination / carriages charges of 7.5 hp raw water motor 2 no from site to workshop and back ,rewinding of raw water motor with including the cost of copper wire complete including credit of old material. /7.5 hp raw water motor/at w/w gochi (

State Government

CTN :45724230

01 Jul, 2026 NA

Fatehabad - Haryana

Tender For tender for pump spare parts & repairs/ bearing ,6309/pump bearings 6309 ,carriage charges of pump from workshop to site after repair / at w/w ,gailn plate new of ms material / glain plate ,labour of pump set opening and fitting./labour charges ,pump housing including bearing sheet made new by welding brass. / 40 hp pump shaft bearing and sheet grinding ,charges ,main bush new of steel / pump bush steel ,making new impeller ring / making of impeller rings

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

State Government

CTN :45305483

13 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

Central Government/Public Sector

CTN :43926323

01 Jul, 2026 NA

Delhi - Delhi

Tender For bid to ras bid to ras corrigendum : supply of vna with noise source , rf peak power meter , spectrum analyzer , hi precision digital multimeter , coax to wg adaptors , dc smr , dc mlat , dummy load , tool kit smr mlat

Central Government / Public Sector

CTN :45736520

21 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of copper catenary wire splice of size 65 sq.mm. consisting parts 1091,1092,1093 and 1094 as per rdso drawing no.eti/ohe/p/1090. note: firms may give a separate additional quote in case latest specification/design amendment is issued by rdso. 2] po will be released to definite description. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45725095

20 Jul, 2026 NA

Mehsana - Gujarat

Tender For supply of insulated electrical tools customised set - combination pliers, long nose pliers, diagonal cutter, stripping pliers, water pump pliers, cable cutter, 4 pcs philips screw drivers of following sizes, 5 pcs slotted (flathead) screw drivers of following sizes, straight knife, voltage tester, 17 pcs 1/2" sockets of following sizes (in mm), 1/2" sockets set accessories, 13 pcs open wrenches of following sizes (in mm), adjustable wrench

corporations/Associations/Others

CTN :45711123

07 Jul, 2026 NA

Parganas - West Bengal

Tender For periodic checking and cleaning of foreign materials from the inlet channel and sump chamber by engagement of specialized man power with proper safety equipments, tools and tackles at dlps/s and d.

By Cities

By States

By Agencies

By Ownerships

By Sectors