Track Work Tenders

Central Government/Public Sector

CTN :44950088

29 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

Central Government/Public Sector

CTN :45067062

29 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

Central Government/Public Sector

CTN :45066284

26 May, 2026 NA

Prayagraj - Uttar Pradesh

Tender For construction of s&t service buildings (lsc) in kaa-aljn section in connection with the work of "reliability improvements of track circuits by provision of msdac in parallel of existing dctc at 14 stations in kaa-aljn section of prayagraj divn. of ncr

Central Government / Public Sector

CTN :45061692

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45063349

25 May, 2026 23.82 Lacs

Waltair - Andhra Pradesh

Tender For providing of monthly basis cab & taxi hiring services - suv; hiring of one road vehicle suv for a period of 36 months for usage of dy ce-tm-wat in connection with official duties inspection and deployed track machines in track maintenance over wat division; outst..

CTN :45067272

14 May, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm weight not less then 330 gm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly consisting of 5.5mm thick sheet glass shelf with cromium plated brass bracket guard and railing , soap dish ss, flat back complete with screw , 2000 ltrs anaerobic frp lldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32-20-32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll isi marked , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6-8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , pvc air pipe 32 mm dia , white cement confirming to is 8042 1989 , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn, 240 volts copper bus bar and neutral link earthing stud conforming , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor , pvc casing capping of size 1 inch medium grade , pvc casing capping of , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug , pvc switch board snow white , pvc switch board snow white , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose , switch socket combination snow white , service bracket 40mm dia gi tubing medium grade , service cable pvc insulated aluminium conductor , ceiling rose three terminal , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round per squire block , plastic body fresh air fan with louvers shutter of 200mm sweep model brisk air of crompton or equivalent model , electric geyser 5 star of capacity 50 ltr , fire extinguisher of one kilogram capacity dry power type conforming to is-13849 along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m //bid details 2 / 82 long , gi wire 4 mm diameter for earthing , charcoal , salt normal , lightening conductor air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm lo

CTN :45067294

14 May, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm weight not less then 330 gm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly consisting of 5.5mm thick sheet glass shelf with cromium plated brass bracket guard and railing , soap dish ss, flat back complete with screw , 2000 ltrs anaerobic frp lldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32-20-32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll isi marked , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6-8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , pvc air pipe 32 mm dia , white cement confirming to is 8042 1989 , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn, 240 volts copper bus bar and neutral link earthing stud conforming , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor , pvc casing capping of size 1 inch medium grade , pvc casing capping of , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug , pvc switch board snow white , pvc switch board snow white , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose , switch socket combination snow white , service bracket 40mm dia gi tubing medium grade , service cable pvc insulated aluminium conductor , ceiling rose three terminal , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round per squire block , plastic body fresh air fan with louvers shutter of 200mm sweep model brisk air of crompton or equivalent model , electric geyser 5 star of capacity 50 ltr , fire extinguisher of one kilogram capacity dry power type conforming to is-13849 along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m //bid details 2 / 82 long , gi wire 4 mm diameter for earthing , charcoal , salt normal , lightening conductor air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm lo

CTN :45067092

08 May, 2026 28.14 Lacs

Krishna - Andhra Pradesh

Tender For charges for unloading of coal from bobr wagons at bobr track hoppers (via 6a and 6b conveyors) and lifting & transporting of accumulated / spilled coal along the bobr track line at chp/ dr.nttps as and when required during the period 01-04-2026 or from the date of commencement of work to 30-09-2026

CTN :45066254

29 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For ner-ljn division:- laying & linking of bg railway track including laying of points & crossing, level crossings with transportation of required p.way materials and supply, stacking & spreading of ballast on existing formation at (1) provision of dn extended loop line at motiganj station. (2) provision of up & dn extended loop line at tinich station and (3). provision of one additional dn loop line at swaminarayan chhapiya station in gkp-gd section. (4) provision of two goods stabling lines with brakevan reversal siding at sahjanwa station. (5) provision of one additional loop line at chureb railway station in gd-gkp section.

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector