Transformer Tenders

State Government

CTN :45744879

10 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For purchasing the 1)cable scrap -xlpe aluminum single core cable 1500 kg ,wp pvc wire scrap (aluminum)- 500 kg , ct/pt unit (pgr power tech model)- 1 unit ,ct/pt unit (suman controls type 1 model)- 4 pieces ,ct/pt unit (suman controls type 2 model)- 1 piece ,ct/pt g (indian transformers)-3

State Government

CTN :43700999

15 Jul, 2026 3.24 Lacs

Thumba - Kerala

Tender For corrigendum : transgrid down stream works at 110kv substation terls renewal of control cable connections for ct pt circuit breaker bus isolators and lightning arresters of 20 mva transformer unit 2 necessitated by transformer repositioning

Central Government/Public Sector

CTN :45731851

14 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of traction transformer complete with cooling system & accessories like h.t cable along with protection shield in passenger compartment and under frame area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories including oil pump, oil cooling blowers etc. as per clause 4.1 rdso specification (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45730997

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of self-priming mono-block pump assembly without controller, as per drawing: edts186, rev-a, corr-1,2, anx-1, oga as per annex-2, packing instruction: alternator,rru, erru&accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gapbetween each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731013

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder juction box for bangladesh coaches, as per drawing: edml261, rev. 1, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the item &its packing shall carry a qr code(optional) containing thedetails as listed below (qr code(optional) to be affixed near name plate of item &on top ofpacking) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731231

06 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of smoke detector unit for power car, as per drawing: edts087, rev-b, corr 1&2 with rcf annexure -br-01, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description ofthe item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1)firms have option to provide qr code. for linkage of po, the cardboard box shall carrya qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the dateof delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45736779

06 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of resistance 4.7 ohm,1000 watt as per drawing no. mei/w-wres/26122017-12 with inverted clamp height of 100 mm and suitable for fixing in existing panel board of size 400 x 250 mm as per clw specification no. clw/es/c-47/i suitable for rc damping panel for auxiliary winding of transformer. note: one sample shall be got approved from the consignee before bulk quantity is manufactured. manufacturer's name and manufacturing month & year should be clearly mentioned on material. the material must be of following make: - escol, vepl, pec, sur, or kiyosh only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736149

07 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of k44 contactor for 60 kva transformer rated current: 200 a, rated voltage: 690v ac, main pole: 4, aux contact: 01no+1nc, control voltage: 230v ac (168 v ac-300 v ac means 230v ac +/-30%) with surge suppressor. confirming to rdso specification no. rdso/pe/spec/ac/0184-2015 (rev. 2) 2026 or latest. make: abb (model no.- af116-b40), firm should submit test report & tender specific authorization from oem. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45733097

07 Jul, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) smps ips dcdp (r), qty=02 nos. (2) smps ips smrs (r), qty=03 nos. (3) ufsbi (r), qty=10 nos. (4) data logger, qty=02 nos. (5) universal axle counter/reset box, qty=24 nos. (6) copper strip, qty=109.9 mtr. (7) ct box 20 pairs, qty=35 nos. (8) ct box 10 pairs, qty=10 nos. (9) eld, qty=03 nos. (10) track feed battery charger, qty=81 nos. (11) ct box 50 pairs, qty=01 no. (12) ips status monitoring panel, qty=03 nos. (13) ufsbi alarm panel presentive, qty=08 nos. (14) fire alarm panel, qty=05 nos. (15) lightning surge protection unit, qty=03 nos. (16) lpd spd box, qty=03 nos. (17) remote terminal unit, qty=02 nos. (18) stm cabinet, qty=04 nos. (19) autometic battery charger, qty=01 no. (20) filter unit, qty=08 nos. (21) track circuit choke type-b, qty=162 nos. (22) sm penal c double line, qty=04 nos. (23) fire extingusher, qty=04 nos. (24) vft transformer, qty=60 nos. (25) relay, qty=1337 nos. (26) ctr, qty=10 nos. (27) signal post (r), qty=35 nos. (28) location box half (r), qty=38 nos. (29) location box full (r), qty=130 nos. (30) relay rack, qty=21 nos. location:- released materials of rvnl lying near lthr station in ttipl campus(ssr), sse/sig/brwd, jharkhand.

State Government

CTN :45527664

14 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work of cleaning maintenance and overhauling of various lt mcc generator phase and neutral links generator bus duct excitation transformer lavt and..

By Cities

By States

By Agencies

By Ownerships

By Sectors