Vibrating Machine Tenders

Central Government / Public Sector

CTN :41037867

19 Aug, 2025 NA

Panipat - Haryana

Tender For corrigendum : annual rate contract for expert services of ge for trouble shooting and maintenance of vibration monitoring system at pr and px-pta

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

Central Government/Public Sector

CTN :40754061

14 Aug, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : custom bid for services - computing module do - 254 compliant fpga d; ar/vr application development including hardware installation-i. certifying and external review authority: rcma/ cemilac and ada ivnv group. ii. design assurance level: dal-a as per ada order iii. fpga development overview: the computing module is the core of the store control system. it consists of a main computing unit (ti s tms570 mcu) for control & fpga for glue logic and peripheral interfaces along with dio and combinational logic. description of computing module (cm) - this computing module is a microcontroller based design. it includes microchip proasic3l series fpga to provide required peripherals. the microcontroller and fpga are connected on 16 bit parallel data bus from the microcontroller. there are total three peripherals connected on the parallel bus. an external flash memory, sram memory and a fpga, all connected devices are memory mapped with respective memory ranges. the fpga provides mil1553 interface with external mil1553 controller, uart, discrete input and output, elapsed counter etc. interfaces to the main microcontroller. the fpga also includes the prognostic logic which records temperature and vibration sensor data over i2c and spi interfaces and writes this data to fram memory connected on spi interface with fpga..

Central Government/Public Sector

CTN :41403377

20 Aug, 2025 NA

Raipur - Chhattisgarh

Tender For biennial rate contract for supply of spares for ird mechanalysis make vibration system installed at ntpc stations

State Government

CTN :41410870

31 Aug, 2025 NA

Parli - Maharashtra

Tender For procurement of ht auxiliary vibration monitoring system spares installed at i&c-2, 250mw, tps, parli v

CTN :41146580

18 Aug, 2025 NA

Sirsa - Haryana

Tender For corrigendum : supply of set of multipurpose vibration acoustic diagnostic machines (vibrometer)

CTN :41402822

22 Aug, 2025 50.00 Lacs

Teliamura - Tripura

Tender For supply cement concrete interlocking paver block 60mm m-35 grade concrete 80mm m-40 grade made by block making machine with vibro hydraulic pressure method of approved size design, shape,tri-colour(red, yellow,grey)at work site under r.d teliamura div

Central Government/Public Sector

CTN :41362164

28 Aug, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps, chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k. type, 0-1250 c, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 cm diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20 ft, galvanized iron pipe b class diameter: 3/4 inch, length: 20 ft, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 ball valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220 diameter:, 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4, diameter:, 4 inch, grit material: aluminium oxide, flap disc. pack of 10, grit number 80, diameter: 4 inch, grit, material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: 4 inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mm bore, step down transformer, 220v ac to 12-0-12 v, 1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v, 16a, switch, sw-spst, in4007 diode, 100kv, ia, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 13s 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 а., power rocker switch, voltage rating: 24 vdc, current rating: 14 ma, 19mm size red power symbol led s.s. momentary type push button switch 5v-24v dc, potentiometers 100 k ohm, potentiometers 1 m ohm, relay module- (ssr-2 channel