Washer Tenders

Central Government/Public Sector

CTN :45589257

03 Aug, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of g.i. nuts and bolt with washer & lock nut size 16x 65x 38 complete conforming to rdsospecification no. ti/spc/ohe/fasteners/0120 rev-1 [03/2017] or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45717327

09 Jul, 2026 NA

Panipat - Haryana

Tender For supply of leco make consumables for cs 744 carbon/ sulphur analyser - eltra ceramic heat shield for brush(pn:14072), valve block,p/n:26245,thermostep tga,eltra, eltra dust filter cartridge(pn:11180), ring, wp thrust washer p/n b7707, o-ring for hydrocracker unit

Central Government/Public Sector

CTN :45743797

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of set of high tensile hexagonal head bolt fully threaded and nuts andcheck nuts, bolt size : m 12 x 60 mm conforming to is 1367 and nut of property class 10.9 with 02 nos. plain washer to is 2016, 01 no. spring washer to is 3063/2002 and 01 no. check nut of size m12 and 01 no. split pin to is 549 size 3.2 mm x 28 mm with pin hole of distance 4 mm from the free end for split pin as per is 549. make %u2013 unbrako/tvs/lps. mfg.t.c. to be provided with material. specn: as per s.s.304 full threaded hex bolt size: m12 x 60 mm long as per is 1363 along with two no. ss 304 plain washer, one no. ss 304 spring washer, one no. ss 304 hex nut & one ss 304 lock nut. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731197

14 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of wiper motor assembly complete as per clw drawing no.clw/ac/163, alt-3 consisting of 08 items,14 nos. [1]wiper mmotor,ref.item-1,qty.-01 no. [2]wiper arm,ref.item-2, qty.-01 no. [3]wiper switch,ref.item-3,qty.-01 no. [4]elange with rubber,ref.item-06,qty.-01 no. [5]elanzo with bolt to suit 06mm od copper pipe,ref.item-07,qty.-01 no. [6]flex screw m8x20/20,ref.item-08, qty.-03 nos. [7]spring washer m8b,ref.item-09,qty.-03 nos. [8]planwasher m8,ref.item-10, qty.-03 nos. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45625846

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of set of high tensile hexagonal head bolt fully threaded and nuts andcheck nuts, bolt size : m 12 x 60 mm conforming to is 1367 and nut of property class 10.9 with 02 nos. plain washer to is 2016, 01 no. spring washer to is 3063/2002 and 01 no. check nut of size m12 and 01 no. split pin to is 549 size 3.2 mm x 28 mm with pin hole of distance 4 mm from the free end for split pin as per is 549. make %u2013 unbrako/tvs/lps. mfg.t.c. to be provided with material. specn: as per s.s.304 full threaded hex bolt size: m12 x 60 mm long as per is 1363 along with two no. ss 304 plain washer, one no. ss 304 spring washer, one no. ss 304 hex nut & one ss 304 lock nut. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

Central Government/Public Sector

CTN :45557192

15 Jul, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of set of spares for pantograph type iro3h. set consists of 7 items. 1) cho1360 lock washer- 02 nos. 2) ch0600 min spring assembly - 02 nos. 3) ch01000 - steady tube complete - 01 no. 4) ch01500 upper articulation assembly - 01 no. 5) ch0920 pin for upper articulation - 03 nos. 6) ch015230 oil seal 1044 - 02 nos. 7) ch015270 circlip b47 - 01 no. of m/s contransys [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45719289

07 Jul, 2026 4.56 Lacs

Mayabunder - Andaman And Nicobar Islands

Tender For running and maintenance of pumps under sub-division no.iv, nacd, apwd, mayabunder. sub work - supply of spares for water pump sets at pokkadera pump house, lucknow pump house, lucknow filter ned, karmatang-ix pump house, karmatang-x pump - supply of pump shaft with lock & key of make : kirloskar, supply of impeller adjustment nut of make : kirloskar, supply of lock washer with nut of make : kirloskar, supply of sleeve of make : kirloskar, supply of impeller first stage of make : kirloskar, supply of impeller second stage of make : kirloskar, supply of rubber o ring set of make : kirloskar, supply of bullet coupling of make : kirloskar, supply of grease packing 10 mm of make : kirloskar, supply of bearing 6307 of make : kirloskar, supply of bearing 3307 of make : kirloskar, supply of air pipe of make : kirloskar, supply of air valve of make : kirloskar, supply of pump shaft with lock & key of make : kirloskar, supply of impeller adjustment nut of make : kirloskar, supply of lock washer with nut of make : kirloskar, supply of sleeve of make : kirloskar, supply of impeller first stage of make : kirloskar, supply of impeller second stage of make : kirloskar, supply of rubber o ring set of make : kirloskar, supply of bullet coupling of make : kirloskar, supply of bearing 6307 of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar, supply of engine oil filter of make : kirloskar, supply of diesel filter stage i of make : kirloskar, supply of diesel filter stage ii of make : kirloskar, supply of fan belt of make : kirloskar, supply of air filter of make : kirloskar

Central Government/Public Sector

CTN :45339511

31 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of stud assly as per is:specn shown in the annexure used for 'v' grooved axle pully consist of 5 nos heardware item as annexure under given:-description of component /qty per assy/specification (1) stud dia 20x2.5x175mm /qty-01set,is:2073-70,c45(galvanised) (2) plain washer (punched)dia 22mm.-qty-02 set.is:1977 st.32 (galvanised) (3) nut m 20x2.5mm- qty-02 set, is:2073,c20(galvaised) (4) lock nut m 20x2.5mm-qty-02 set,is:2073 c 20(galvanised) (5)split pin dia 4x40mm-qty-02 set, is:549 table -i. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

By Cities

By States

By Agencies

By Ownerships

By Sectors