Waste Oil Tenders

State Government

CTN :41676459

20 Sep, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of different laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoride & nitratemeter: ph/ion/ mv-redox-orp/ temperature benchtop meter with electrode for testing both fluoride & nitrate separately in water samples. technical specification: ph range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 accuracy 0.002 ph + 1 lsd calibration points up to 5 buffer sets: usa/ nist/ din/ custom orp range 2000.0 mv rel. mv range 2000.0 mv accuracy 0.2 mv resolution 0.1 mv ion concentration 0.001 to 19999 ppm resolution up to 3 digits relative accuracy 0.5 % full scale (monovalent) and 1 % full scale (divalent) calibration points up to 8 temperature range 0 to 100 c, 32 to 212 f resolution 0.1 accuracy 0.3 c/ 0.5 f compensation: auromatic temperature correction other requirement: auto buffer recognition, memory 500 with time and date stamp rs 232 alarm for calibration due & out of range alurm auto logging function., fluoride electrode of ion metersame make that of the ion meter, nitrate electrode of ion metersame make that of the ion meter, manifold filtration assembly (to be used for micobiological test)* sturdy and easy to clean ss filtration assembly with funnel, manifold unit, air vent filter and vaccum pump ready to be used for mictobiological testing * specification: # funnel with inbuilt clamp: made of ss 316, capacity: 300 ml, ss filter support base, ss support screan: 47 mm, made of ss 316l; filtration area 9.6 cm2; silicon stopper: size 8, with silicon lid and silicon o ring. # filtration manifold: 3 place manifold, made of ss 316, valves made of ptee, connection 12 mm; suitable for both pp and ss funnel with rubber stopper fittings. # vacuum pump: oil free, piston powered, suitable to be used with 3 possition manifold; max flow rate: 34 l/ min; vaccum stage: double. max vaccum: 100 mbar. the vaccum pump should also have a vacuum suction bottle to protect the pumps componennt by preventing liquid or solid material from entering the pump during filtration process., voltage stabilizer (3 phase)# capacity- 3 kva # input voltage range: 295 v - 465 v normal range # output voltage range 380 v / 400 v / 415 v # output regulation: 1 %; # output settability: 380 v - 420 v; # frequency: 47 hz - 53 hz; correction rate: 70 v/ sec; # aircooled servo stabilizer, three phase., heating mantle (single station) should have safety cut off with precise heating for boiling, evaporation, distillation or extraction process technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 350 degree celcius. accuracy: 1.0 degree celcius, display: led display with temperature, time; construction material: ms; power consumption : 150 w, semi automatic digestor for cod analysis with all assssories material of construction epoxy painted with chemical resistant coating; temperature range ambient to 450 deg c # stability of temperature 0.5 deg c # temperature calibration - automatic; selectable ramp: upto 4 per program; digestion time range: 1 to 999 minutes; time selection: 1 minutes steps; countdown: digital readout; heating places - 6 possition; size of tubes: 250 ml test tubes (42 mm); power 1000 w; number of programmable methods 20 numbers. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint., digital thermometer with probe# mini lcd thermometer # type: digital, # sensor cable length: 1 meter water proof probe # batteries: 2 x batteries should be included, # temperature range: - 50 - 110 oc, # temperature measurement accuracy: 1 0c, micropippete stand#self-standing holder accommodates most major brands of pipettes. #material: pmma, # capacity: 5 pipptes/stand, conical flask draining rack#material: acrylonitrile-butadiene-styrene/polycarbonate, # no. of pegs: 20

State Government

CTN :41604057

08 Sep, 2025 NA

Bilaspur (Hp) - Himachal Pradesh

Tender For unserviceable dismantle material i.e. spare parts of various vehicles /machines((1) radiator (tata 1612)-1no) (2)self-starter assembly no(3) clutch pump assembly dozer =2nos)(4) mild steel scrap and cast iron scrap 1495.25 kg)(5) non feroous metal (cu,brass&al) scrap-10kg) (6) tyre with tube tata 407 7.50-16 4nos)(7) batteries 12v 35ah 2nos (8) tyre maruti car 145/70r12-2nos )(9) old and used lubricants(black oil )926 itrs)laying in meechanical hp pwd sub-division parchhu

Central Government/Public Sector

CTN :41644019

23 Sep, 2025 NA

Mandal - Gujarat

Tender For spares for sandvik make cone crusher > - liner pinion shaft arm, liner pinion narrow arm, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, wearing plate, arm shield, min shaft sleeve, mantle a m1, head nut w/burning ring, burning ring, spider cap, spider bushing, oil seal ring, concave ring, air filter p.1010r1/4", filter hc 69, filter catridge hc 2, air filter purolator, bushing bottom shell, eccentric bushing 32+36+40+44, eccentric wearing plate, hydroset cylinder bushing, piston wearing plate, step washer, oil seal ring, main shaft step, head nut inner, dust seal ring, disc spring 90 x 46 x 5, mechanical rubbing seal, lubrication pump assembly, rubber compression mounting, concave f, concave ec, mantle b, filter ring mf, eccentric bushing 24+28+32, filter catridge, filter catridge, support ring, retaining ring, seal ring inner, locating bar, shim t=0.07, pin prymn 16 x 45, gasket, gasket t=0.5, gasket t=0.8, gasket t=0.5, gasket t=0.8, gasket t=1.5, valve 607.3, valve ha we mve 6f, valve dn 32 0.7 mpa, pump hpi p3-ban-1003, pump l095-02v, feed hopper cone- lh, feed hopper cone- rh, dowel pin, bearing, bearing, rubber compression mounting, screw m6s12 x 25, washer brb 13 x 24, screw m 12x45, lock nut m12, pump p3-aan-0,75-fl-20-b01, charge equipment cgh-300, feed hopper, screw m6s 20x90 8.8, washer brb 21x36, screw m6s 20x60 8.8, washer tbrb 21x36, steel pipe din 2391/c-st 35,4 10x1,5, hose sae 31,5/0,6 l=210, screw m6s 30x280 8.8 iso 4014, washer 80x30x85, washer 80x30x140, shim t=1, shim t=3, shim t=5, shim t=10, screw m6s 30x360 8.8, lock nut m30 8 fzb din 985, sleeve, washer, screws m6s 42x220 8.8, nut m6m m42 8 fzb iso 4032, screw m6s 42x100, screw m6s 16x55, retaining ring sga 100 ss1581, scraper, retainer, screw m6s 16x65 8.8 iso 4014, dust collar, screws m6s 16x65, washer brb 17x30, gasket, ring, screw mc6s 10x40 8.8 fzb, ring, screws m6s 12x40 10.9 iso4017, washer brb 13x24 hb200 iso 7089, key r, gear and pinion set, screw mc6s 12x70 12.9, screw mc6s 12x50 12.9, washer din 137 b 13x24, pin cp 25m6x60 sms 2374, hydroset cylinder, o-ring 453x5.7, o-ring 419.3x5.7, piston, chevron packing, hydroset cylinder cover, screw m6s 24x90, screw m6s 24x140, washer brb 25x45, air bleeder valve, plug, o-ring 44,2x3, screws m6s 8x25 8.8, hydraulic hose 2 , adapter r2 xr2 , tredo nr.20 3/4 , sealingring tredo nr 28, accumulator uncharched (pressure 2.0 bar), accumulator charching pressure 5,0 mpa without asr/ with asr plus, o-ring 84,1x5,7, o-ring 99,1x5,7, spacer inner, spacer outer, bearing cover inner, bearing cover outer, pinion shaft, key 22x14x95 sms2307, 3_retaining rings sga 85, opds complete unit, thermostat, helifloat level guard, pressure drop indicator pis 3097/2 2 bar, cooler complete, coupling half d25 05-32-116, coupling half d38 05-32-540, gear ring 05-32-120, pump unit hpi 1003 8,6 l/min, pump unit rb6 80 l/m 400vy50, temp.indicator, pressure indicator, pressure gauge 100m20-2 0-6 mpa/psi, pressure drop indicator pis 3097/2 2 bar, filter base pi 2205-56, filter head pi2728-47 r1 1/2, dirt trap sw/o 1 1/2-0,6mm, level indicator l=508mm, level indicator l=254mm m 12, air- oil cooler with motor, radiator, spider cap "o" ring, tredo seal, "o"-ring, main shaft sleeve (new type), pressure drop indicator pis 3097/2 2 bar, pinion shaft repair kit, filter insert 2pcs, main shaft cover ch440/cs440, screw mf6s 10.9 fzb m20x40, wt7000 crusher rubber liner, hx900 crusher metal liner, 300x300x30, hx900 crusher metal liner, 300x300x40, hx900 crusher metal liner, 300x300x50, pulley 375 mgt 125 10 x spc, bushing mgt nr 125 100, key r 28 x 16 x 110sms 2307, spacer ring d115/100.5 x 58, washer 2142-50 d 120/18x15, washer brb 17x30 hb200 iso 7089, screw m6s m16x35 8.8 fzb iso 4017, spacer, spacer, o ring 34.2 x 3, sealing ring, 1.5" x 6 mtrs hydrulic hose, 3/4" x 8 mtrs hydrulic hose, pinion shaft housing assembly, pinion shaft housing, elbowa4 zn dn20, adapter 3/4", magnetic plug 0606-12, scre

Private Sector

CTN :41672842

12 Sep, 2025 NA

Vadodara - Gujarat

Tender For sale of corrugated boxes: 100,000 kg, corrugated boxes scrap of orchad: 10,000 kg, empty oil barrel 210 ltrs (ms): 250 nos, empty paint barrel 10 ltrs (ms): 800 nos, empty paint barrel 20 ltrs (ms): 2,000 nos, garbage waste: 50,000 kg, ms scrap: 75,000 kg, wooden patia: 50,000 kg

corporations/Associations/Others

CTN :41678512

16 Sep, 2025 10.00 Lacs

Coimbatore - Tamil Nadu

Tender For reclamation of used and unserviceable transformer oil

corporations/Associations/Others

CTN :41669111

09 Sep, 2025 NA

Kota - Rajasthan

Tender For auction sale of light iron scrap & heating element scrap,brass and gun metal scrap,mn steel hammer ring scrap,empty oil drums (iron),electrical item scrap,e- waste scrap,m.s. chips scrap,conveyor belt scrap (old, used & unserviceable),plastic jarican scrap,paper raddi,wooden scrap of packing boxes with attached g.i. strip/sheets & other,empty oil/chemical drums (hdpe)

corporations/Associations/Others

CTN :41680059

24 Sep, 2025 NA

Jaduguda - Jharkhand

Tender For auction sale of iron and steel scrap,high carbon steel scrap,manganese steel scrap,tc rods scrap (straight),drifter rod scrap,rubber scrap,m.s. barrel of lubricants (empty) scrap 210 ltrs,rubberlined steels pipe scrap,electric scrap,aliminium (utensils) scrap,copper scrap consisting super enameled copper wire,brass / gun metal,tyres of vehicle / machine size above 1000mm,tyres of vehicle / machine size below 1000mm,scrap motors assorted sizes,bi-cycle,batteries,used oil duly packed in ms barrel of 205 itrs,turning scrap,bearing scrap,wire rope scrap with / without wooden spool,machinery parts scrap and rock drill spares scrap,button bits scrap,tools scrap,chemical bottles scrap,misc. e-waste items

corporations/Associations/Others

CTN :41680061

24 Sep, 2025 NA

Ranchi - Jharkhand

Tender For auction sale of condemned store items,spare parts,burnt oil,e-waste items

corporations/Associations/Others

CTN :41680023

17 Sep, 2025 NA

Secunderabad - Telangana

Tender For auction sale of u/s vechicle spare parts,u/s vechicle tyres and tubes,u/s vechicle batteries,u/s vechicle burned oil

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

By Cities

By States

By Agencies

By Ownerships

By Sectors