Welding Electrode And Stores Tenders

Central Government/Public Sector

CTN :45152852

18 May, 2026 NA

Agra - Uttar Pradesh

Tender For supply of portable single phase 200 amps igbt based pwm invertor based welding machine, as per the attached annexure-a. make - ador-model-esab/crux weld/kemppi or similar [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :45153708

02 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of alumino thermit welding portions (usingdescription of materialcompressed air petrol/lpg pre-heating system) 3 piece prefabricatedmould (zircon washed) manually pressed, single shot crucible fittedwith auto tapping timble for south central railway as per rdsospecification no.irst/19-2020 for 60kg/60e1-r260 grade rail-25mm gap and as amended up to the date of opening of tender. (with accessories as per annexure-l) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45120651

01 Jun, 2026 NA

Kollam - Kerala

Tender For supply, installation and commissioning of heavy duty portable inverter welding machine (igbt based).single phase, mains supply ,v/ph.hz-230v single phase,50hz.input power (max) ,kva-12, output current range a-30-250a,maximum load at 60 % duty cycle a-250a,maximum load at 100% duty cycle a-194a,open circuit voltage v-80v ,display-digital display, efficiency-88. the supply shall include equipment as detailed in the specifications along with theall the accessories which are essential to make the equipment fully operational when connected to power source. detailed description enclosed.warranty period: 30 month(s) from the date of supply [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45154295

02 Jun, 2026 NA

Trivandrum - Kerala

Tender For supply of digital controlled igbt inverter based mig/mag welding system with remote management controller for maintenance of lhb coaches. specification attached. warranty : 30 months from the date of commissioning [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45147339

22 May, 2026 NA

Margao - Goa

Tender For supply of welding holder for arc welding machine heavey duty , copper welding cable 50 sq mm hofr , heavy duty earth clamp with brass jaws 600 amps , welding screen holder , arm sleeve , leg guard , welders apron , eco helmet , leather hand gloves of 16 inch length double palm end

Central Government / Public Sector

CTN :45150493

22 May, 2026 NA

Secunderabad - Telangana

Tender For supply of portable welding machine (v2) (q3)

Central Government / Public Sector

CTN :45146143

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12265ms26b, 98050011, quantity- 41.295 mts. scrap condemned unserviceable ms bed plates, water tanks and water tank cut pieces, ms path plates, foot path plates, sheets, bin cut parts, rack and roller path, air tank cover parts, striker casting wear plates, sliding doors, swing doors, flap doors, ms chequered plates, expansion tank parts, ms plates, plate cuttings, wagon doors, dsl engine long hood, dummy bogie cut parts, cast iron surface plates and base plates, axle counter ms frames, baking oven cut pieces, ocb duct, welding machine outer body, inverter empty body, tap changer ms spares and empty body, manipulator, shaping machine ms body, ms gates, collapsible gates, base plate, short hood cabin cut parts, tables, racks, lavatory chute brackets, ms travelling base, ms danger boards, radiator ms spares, ms die blocks, ms body of radiator fan motor, capacitor ms body, auxiliary transformer ms empty body, ducts, dust bin stand, ht load brake switch body, ms transformer body, ventilator motor frames, transformer top plate, air receiver, storage box cut parts, coach body parts, dust bins, lockers, cattle guard, incinerator chimney parts, incinerator oven, incinerator cut parts, boxes, wagon doors cut pieces, wagon bfr end plates and cut pieces, ms fuel tanks [fire prone], boiler tank cut pieces, angles, girder, sheets cut pieces, pipe bending machine, lathe machine parts, transformer lifting trolley, lifting stands cut pieces, wagon damaged body sheet, floor sheets, pillar type jcb crane dismantled parts, loco lifting tackle assembly cut pieces, portable, jmb duct, stands, channels, fabricated structures, grinding machine body cut pieces cutting crane for utv, and other corroded heavy melting scrap of different thickness of sorts and sizes, with or without attachments. note- 1. gas cutting permitted for the purpose of loading only. 2. it is the responsibility of the purchaser to ensure that fuel tanks to be filled with water and cleaned thoroughly free from flammable substances before cutting to avoid explosion or any casualties. 3. private crane permitted for loading. special note- gas cutting for fuel tank should be done in open area [cutting must be kept clear and free of flammables] and away from bins [free from recognized hazards that are causing or are likely to cause serious harm] and should follow fire-prevention and fire-protection measures. location- [bin no- 265, left side of road no- 2]. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988

Central Government/Public Sector

CTN :45138087

19 May, 2026 NA

Sundergarh - Odisha

Tender For providing of custom bid for services - assly & welding of skid pipes

Central Government/Public Sector

CTN :45138396

29 May, 2026 NA

Katipala - Karnataka

Tender For providing of custom bid for services - 34200000140- ser 1059505 fabrication of complete duct assemblies for fg-1 to fg-7 with materials as per scc & boq,custom bid for services - 1059506 - refractory application-50mm(fg-3 to fg-6 as per scc & boq,custom bid for services - 1059507- refractory application-100mm(fg-1, 2 &7) as per scc & boq,custom bid for services - 1059508- dismantling of duct fg-1 to fg-7 as per scc & boq,custom bid for services - 1059509 fabrication of ca, ha and gaph cone as per scc & boq,custom bid for services - 1059510 welding of ca, ha duct as per scc & boq,custom bid for services - 1059511 carbon steel (cs) piping welding as per scc & boq,custom bid for services - 1059512 fd fan gb1002a/b suction hood with silen as per scc & boq,custom bid for services - 1059513 gb1002a/b suction reducer and mitre as per scc & boq,custom bid for services - 1059514 gaph(bc1002) replacement job as per scc & boq,custom bid for services - 1059515 caph(bc1001) replacement jobs as per scc & boq,custom bid for services -

Central Government/Public Sector

CTN :45137990

23 May, 2026 NA

Raigad - Maharashtra

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

By Cities

By States

By Agencies

By Ownerships

By Sectors