X Ray Film Tenders

Central Government/Public Sector

CTN :44844670

02 May, 2026 NA

Midnapore - West Bengal

Tender For supply of agfa x-ray films

Central Government/Public Sector

CTN :44842214

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

State Government

CTN :44824358

17 Apr, 2026 9.90 Lacs

Behror - Rajasthan

Tender For providing of corrigendum : digital x-ray fuji film supply

State Government

CTN :44823982

15 Apr, 2026 9.00 Lacs

Chittorgarh - Rajasthan

Tender For corrigendum : providing of x-ray film for lab

CTN :44838402

15 Apr, 2026 NA

Deoghar - Jharkhand

Tender For invitation of quotation for paper envelopes for x-ray films for dept. of radio-diagnosis at aiims deoghar

CTN :44801949

22 Apr, 2026 NA

Pune - Maharashtra

Tender For supply of industrial x-ray film of size 14" x 17" , type high speed, fine grain, high contrast equivalent to ndt

CTN :44802649

30 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - lumpsum job scope for cdu - 1.a. blinding and deblinding - rate per , 1.b. blinding and de-blinding with using , 1.c. blinding and de-blinding with using , 1.d. gasket repacement , 1.e. gasket repacement using non sparkin , 1.f. gasket repacement using torque wren , 1.g. bolt servicing upto 12" dia flanges , 1.h. bolt servicing above 12" dia flange , 1.i. bolt servicing from 24" dia flanges , 1.j. bolt servicing upto 12" dia flanges , 1.k. bolt servicing above 12" dia flange , 1.l. bolt servicing from 24" dia flanges , 1.m. bolt servicing upto 12" dia flanges , 1.n. bolt servicing above 12" dia flange , 1.o. bolt servicing from 24" dia flanges , 1.p arresting flange leaks , 1.q. arresting flange leaks using non sp , 1.r. arresting flange leaks using torque , 1.s. opening of flange using flange spre , 1.t blind fabrication , 1.u. plate flange fabrication , 1.v. cold cutting of pipelines , 1.w. providing air / steam hose connecti , 1.x. splitting of nuts using nut splitte , 1.y. bolts cutting with hacksaw/grinding , 2.a. piping - cs fillet joint per inch d , 2.b. piping - cs fillet joint per inch d , 2.c. piping - cs fillet joint per inch d , 2.d. piping - as/ss fillet joint (smaw) , 2.e. piping - as/ss fillet joint (tig) , 2.f. piping - fillet joint monel/inconel , 2.g. piping - fillet joint monel/inconel , 2.h. piping - cs butt joint non x ray qu , 2.i. piping - cs butt joint x ray qualit , 2.j. piping - cs butt joint x ray qualit , 2.k. piping - cs butt joint x ray qualit , 2.l. piping - as/ss butt joint (tig root , 2.m. piping - as/ss butt joint (tig) , 2.n. piping - butt joint monel/inconel ( , 2.o. piping - butt joint monel/inconel ( , 2.p. piping - cs corrosion pad per inch , 2.q piping - cs corrosion pad with shoe , 2.r. piping - as/ss corrosion pad per in , 2.s. piping - as/ss corrosion pad with s , 2.t. wrap coating using "pykote" of 4 mm , 2.u. nozzle replacement/provision, rate , 2.v. cs gusset fabrication n welding per , 2.w. as/ss gusset fabrication n welding , 2.x. piping - cs rf pad per inch dia usi , 2.y. piping - as/ss rf pad per inch dia , 2.z. non-pressurized piping welding join , 2.aa. grit blasting , 2.bb. primer painting - inorganic zinc s , 2.cc. painting - for insulated pipe havi , 2.dd. painting - for insulated pipe havi , 2.ee. manual cleaning of pipelines , 2.ff. erection / dismantling of piping / , 2.gg. hot work area preparation in runni , 2.hh. hot work area preparation in runni , 2.ii. hot work area preparation in runni , 2.jj. hot work area preparation in runni , 2.kk. power tool cleaning on surfaces , 3.a. dye penetrant test , rate per inch , 3.b. dye penetrant test , rate per runni , 3.c. dye penetrant test , rate per sq me , 3.d. wfmpt, rate per inch dia of wfmpt d , 4.a. radiography on piping with iridium , 4.b. radiography on piping or any other , 4.d. radiography on piping with selenium , 4.e. radiography on piping or any other , 4.g. mobilization charges for digital ra , 4.h. radiography film devolopment with d , 4.i. profile radiogrpahy of surface - mo , 4.j. profile radiogrpahy of surface - re , 4.k. profile radiogrpahy of surface - ch , 4.l. profile radiogrpahy of surface - re , 4.m. profile radiogrpahy of surface - ch , 5.a. stress relieving done using electri , 5.b. stress relieving done using electri , 5.c. stress relieving done using electri , 6. ultrasonic flaw detection test. rate , 7.a. overlay patch work (rate per sq.foo , 7.b. overlay patch work (rate per sq.foo , 8.a. inlay patch work - cs inlay patch p , 8.b. inlay patch work - ss inlay patch p , 9. replacement of casing plates 8 mm thk , 10.a. weld build up cs – upto 1000 sq in , 10.b. weld build up cs – from 1001 sq in , 10.c. weld build up cs – from 3001 sq in , 10.d. weld build up cs – from 5001 sq in , 10.e. weld build up cs – above 10000 sq , 10.f. weld build up as / ss (all varieti , 10.g. weld build up as / ss (all varieti , 10.h. weld build up as / ss (all varieti ,

CTN :42579205

04 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.) - schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.), polyster base round corner x-ray films (8" x 10") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (10" x 12") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (12" x 15") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, dental x-ray films intraoral periapcal the density values should blue base with base fog less than or equal to 0.20 & dmax not less than 3.10 the density values should be met at developer temperature 32 c to 35 c, liquid developer replenisher for automatic processor (starter solution, if recommended by the manufacturer, should also be supplied), ( price of item no. 5 and item no. 6 will be considered as a unit), liquid fixer hardner for automatic processor ( price of item no. 5 and item no. 6 will be considered as a unit), inj. meglumine diatrizoate sodium diatrizoate iodine content 365-375 mg/ml in 20 ml. ampoule/vial, pigtail angiography catheter with multiple side holes length 65 to 75 cm 5f, inj. gadolinium based contrast for mri for liver/liver specific (should provide details of compound being hepatobiliary specific), inj. gadolinium based contrast for mri for general use, inj. gadolinium based contrast for mri for angiography, disp lure lock syringes 3 ml. for glue injection, disp lure lock syringes 1 ml. for glue injection, x-ray folders laminated 250 gsm 14 1/2" x 17 ", dual pack 200 ml syringe with aspirator, "y" shaped coiled tube y-tube sterile, non-pyrogenic (minimum 300 psi & above) compatible with dual head pressure injector ( lf/medrad/ sea crown / spectra / apollo), extension "y" shaped coiled tubing for injector 150 cms. (-5 or +15cm) low pressure (minimum 300 psi & above), dual disposable syringes (60 to 65 ml each) with "y" or "t"shaped coiled tube connecting tubes small spike for contrast and large spike for saline compatible with mri injector (lf or medrad)., one way stopcock (high pressure), low pressure extension "y" or "t" shaped coiled tubing min. 150cms (-5 or +15 cms) with coiled connecting tubes & small spike for contrast & large spike for saline for medical mri injector., flavoured, ionic, water soluble, oral contrast iodine content 240-250 mg/ ml. in 30 ml, bernstein catheter 4 f 100 cm, bernstein catheter 5 f 100 cm, chiba needle 21 g 15 cms length, chiba needle 22 g 15 cms length, disposable c t scan pressure injector syringes (190 ml syringe + quick fill tube) for bayer medrad salient injector (toshiba / canon), extension "y" shaped coild tube adapter dual check valves (minimum psi 300 & above), nonionic iodixanol isoosmolar, 320 mg 50 ml, disposable mri syringes kit for 65/115 mr injector system 65 ml contrast syringes and 115 ml ns syringes with connecting tubing combo pack for spectris solaris medrad pressure injector, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 14 g & 10 cm in length, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 16 g & 10 cm in length, coil shape breast tissue marker with both front trigger & an alternate rear trigger, should be visible in ultrasound, mammography and mri, extension coiled tube with integr