Latest Municipal Corporation Of Delhi Tenders | Municipal Corporation Of Delhi e-procurement Tender

Corporations And Associations And Others

CTN :43499288

15 Jan, 2026 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43535766

19 Jan, 2026 8.13 Lacs

Delhi - Delhi

Tender For improvement/ development of park near bal kishan hospital in tigri, 162/sz

Corporations And Associations And Others

CTN :43499290

15 Jan, 2026 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43535768

19 Jan, 2026 15.84 Lacs

Delhi - Delhi

Tender For improvement and development of road by pdg rmc and drain in manjeet vali gali from h.no.565 to h.no 571 and a connected lane in devli ward no.161/sz.

Corporations And Associations And Others

CTN :43499289

15 Jan, 2026 2.38 Lacs

Delhi - Delhi

Tender For supply of different type of items at molarband ward no. 181, central zone - providing and fixing m. s. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. the vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. the vertical members shall be welded to 4 nos. 25x6 mm m. s. flats placed horizontally around the vertical member of the cage. one name plate of 1 mm thick m.s. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered cpwd/ pwd/ any other approved name. the tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. the tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect, supply of hessian cloth, synthetic enamel paint in all shades except black or chocolate shade yellow colour, synthetic enamel paint in all shades except black or chocolate shade green colour, supply of 1 pvc pipe with nylone braided in good quality as per direction of officer-in-charge, supply of bamboo broom with wooden handle in standared size & banded by iron ring, supply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max - providing and fixing m. s. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. the vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. the vertical members shall be welded to 4 nos. 25x6 mm m. s. flats placed horizontally around the vertical member of the cage. one name plate of 1 mm thick m.s. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered cpwd/ pwd/ any other approved name. the tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. the tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect, supply of hessian cloth, synthetic enamel paint in all shades except black or chocolate shade yellow colour, synthetic enamel paint in all shades except black or chocolate shade green colour, supply of 1 pvc pipe with nylone braided in good quality as per direction of officer-in-charge, supply of bamboo broom with wooden handle in standared size & banded by iron ring, supply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max

Corporations And Associations And Others

CTN :43535767

19 Jan, 2026 18.48 Lacs

Delhi - Delhi

Tender For improvement/development of community toilet into sanitation office having two rooms and toilets (male/female) by providing brick work, rcc items and sanitary items, tiles in h.no. d-153, jj colony khanpur, khanpur ward 167/sz.

Corporations And Associations And Others

CTN :43495037

13 Jan, 2026 NA

Delhi - Delhi

Tender For supply of garden machinery and tools at horticulture store in nangloi w. no.45 rohini zone. - supply of garden machinery and tools at horticulture store in nangloi ward no.45, rohini zone., s/o husqvarna brush cutter model no-541 rs 2-stroke petrol engine displacement 41.5 cc, power(1.6 k. w/2.01 h.p), with trimmer head, grass cutting blade, hamess, tool kit(weight 7.3 kgs or equivalent., s/o 3hp single phase electric motor of good quality & heavy duty., s/o 2 core round wire, 4 mm cable of isi mark & good quality., s/o two handed bypass prunner(lopper), s/o simplex manual tree prunner, s/o hedge shear, s/o pvc pipe 1" size of good quality, add 5%contigency

Corporations And Associations And Others

CTN :43535769

19 Jan, 2026 14.53 Lacs

Delhi - Delhi

Tender For improvement and development of road by pdg rmc and brick work drain from h.no 568 to h.no 3.10 and pdg rmc from in harijan basti in devli ward no.161/sz.

Corporations And Associations And Others

CTN :43495031

13 Jan, 2026 NA

Delhi - Delhi

Tender For supply of garden machinery and tools at horticulture store in sultanpuri w. no.42 rohini zone. - supply of garden machinery and tools at horticulture store in sultanpuri ward no.42, rohini zone., s/o husqvarna brush cutter model no-541 rs 2-stroke petrol engine displacement 41.5 cc, power(1.6 k. w/2.01 h.p), with trimmer head, grass cutting blade, hamess, tool kit(weight 7.3 kgs or equivalent., s/o husqvarna chainsaw model no 372xp or equivalent., s/o two handed bypass prunner(lopper), s/o simplex manual tree prunner, s/o hedge shear, s/o pvc pipe 1" size of good quality, add 5%contigency

Corporations And Associations And Others

CTN :43535785

19 Jan, 2026 12.52 Lacs

Delhi - Delhi

Tender For improvement and developement of lane from kaun wali gali in kishangarh,vijay pal gali,jeet ram house to randhir house in kishangarh by providing rmc in ward no.155, mehrauli

Municipal Corporation Of Delhi Tenders - MCD Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors