Fasteners Tenders

Central Government/Public Sector

CTN :39947869

23 Apr, 2025 NA

Ferozepur - Punjab

Tender For supply of cordless brushless impact wrench (ongc)

Central Government / Public Sector

CTN :39926467

15 Apr, 2025 NA

Panipat - Haryana

Tender For supply of plds spares of emerson make - repair kit pilot ps 79ap , repair kit pilot ps 80ap , pilot ps 79ap 40 to 48 bar , pilot ps 80ap 40 to 48 bar , repair kit fl150 6inch regulator , spare kit pu for fl sr 150 x 600 series , pad holder kit for fl150 fl6in complete , pad holder fl150 fl6in , pad for regulator 6 inch , repair kit fl80 3inch srs regulator , repair kit for fl100 4inch regulator valve_monitor and active_only pad and o ring , repair kit for fl100 4inch regulator valve_monitor and active_complete , repair kit for ssv fl4in , repair kit for ps_80_ap_ fkm , repair kit for ps_79 special version , pad for fla_sr_1inch , piston sleeve 1 inch , repair kit for ssv feq_25 main body , repair kit for ssv feq sensing device bms_c , repair it for regulators 1in fl_srs fkm cl300 , repair kit 1_ holder_pad_dn25_ 2 disk retainer_type fl_flbp_25_sr 3 screw cap_hex 4 washer_d_6_ 4 elastic din , pilot ps_80_ap fkm 2.5_8 , pilot ps_79_ap fkm 2.5_8 , repair kit for ps_80_ap mv pilot , repair kit for ps_79_ap fkm rv pilot , piston sleeve 1inch , repair kit 1 holder_pad_dn25_ 2 disk retainer_type fl_flbp_25_sr 3_ screw cap_hex 4_ washer_ d.6 4 elastic din , pilot ps_80_ap fkm 25_30 kg , pilot ps_79_ap fkm 25_30 kg

Central Government/Public Sector

CTN :39948992

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of pneumatic impact wrench

State Government

CTN :39919595

11 Apr, 2025 22.32 Lacs

Fazilka - Punjab

Tender For supplyin and placing furniture in 2 nos temporary courts at judicial court complex abohar - table 8x4 for judgesupplying & placing executive table with credenza unit and pedestal in completely knock down conditions with an overall size 2400mm x 1200mm x 750mm that is to be assembled at site. the worktop shall be 43mm thick having the combination of 18mm pre-laminated particle board with approved laminate and shade as top and 25mm medium density fibre-board as base top. the worktop shall have the size 2400mm x 1100mm having the profile in rectangle shape and the edges (top) shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius and deco paint with half round post form edges along with grooves (base top). the top shall be supported on 4 nos. of ss pipe strips having size 230mm x 60mm x 15mm. the table shall be clad with 48mm thick modesty panel which provide structural support for the table. it should be 48mm thick pre-laminated particle board in linear shape with appropriate pvc edge banding. there shall be buffers provided to avoid to avoid scratches on the floor as well as uneven surfacing. the credenza unit shall have the size 1600mm x 500mm x 670mm. it should be made up of pre-laminated particle board of grade ii of is 12823 with top 25mm thick, drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 5 drawer and operated with the assistance of ss handle and easily close & open with roller channel ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. pedestal shall be provided with an overall size 400mm x 500mm x 660mm. it should be made up of pre-laminated particle board of grade ii of is 12823. pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. it shall have 3 nos. of drawer having same size and operated with ss handle and easily close & open with the assistance of roller and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted on injection moulded nylon castor. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380, premium chair for judgessupplying and placing ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 15mm thick hot pressed plywood with hr polyurethane foam 50mm thick having density 40kg/m upholstered with black leatherite tapestry with 0.8mm thick and 535 gsm and the back shall be supported by metal insert ms crca chrome plated with hr polyurethane foam 12mm thick having density 23kg/m upholstered with black leatherite with 0.8mm thick and 535 gsm.tthe armrest shall be used cushion arm completely joint with seat and back. the chair shall have synchro tilt revolving mechanism with single position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with bifma standard class-3 gaslift to suit them using the lever under the seat. the gas-lift mechanism should be tested as per ansi/bifma x5.1-2011 standards. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with bifma standards. the seat size shall be 490 10 mm(w)x490 10 mm(d) and back size shall be 640 10 mm(h) from seat & overall height = 1095 10 mm., table for steno/reade

corporations/Associations/Others

CTN :39920155

15 Apr, 2025 NA

Margao - Goa

Tender For supply of procurement of digital clamp meter

Central Government/Public Sector

CTN :39946719

28 Apr, 2025 NA

Jaduguda - Jharkhand

Tender For supply of piston shoe for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , cylinder block for rexroth make pump model aa4vg56hd3d1 or 32r- nsc52fxx3s-s mnr r902148575 , valve plate for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , retainer plate for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , ball guide for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , swash plate for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , saddle bearing for rexroth make pump model aa4vg56hd3d1 or 32r- nsc52fxx3s-s mnr r902148575 , bearing set for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , spring for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575 , seal kit for rexroth make pump model aa4vg56hd3d1 or 32r-nsc52fxx3s-s mnr r902148575

Central Government/Public Sector

CTN :39911971

15 Apr, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/elgi make screw compressorspares/061/338 - consumable spares list, air filter element, oil filter, element separator (e90-160), minimum pressure valve kit, intake valve kit (e132-160), coupling element e90-160, blow down valve kit, pressure transmitter, temperature sensor, air inlet system, nc intake valve 4 inch hpkg-120, ss t bolt clamp jt6a20-dia 170, elbow; rubber 6 , indicator: air filter clog, drive coupling,dia 80/60, a/e pkg gr:1.326 axis 284, connector; pvc hose 3/4", steel reinforced pvc hose 60mm, after and oil cooler assy-e-160, base assembly-e160, bracket - airend, vertical tank e132-e160, hose-3 inch discharge, bracket air filter assy, filter head 360 lpm machining, dia 550 pusher fan 400v, oil return line assembly, exhaust fan 6" sq 220v, pressure regulator prne, ball valve 3, hose set e90-e160 wc (4nos), filter assy. -360 lpm, fan dia. 42" with hub ee160, steel reinforce pvc hose 20mm gre, o/c &a/c assy ee160 alu.coler, tank rec e90-e160 horizone, pipe assy mpv hose to cool, hose assy mpv to cooler, pipe with elbow assy, hose assy 1 1/2 tv to oil out, hose assy tv to oil in, pipe with flange assy, pipe tee assy, hose with metallic bellow 32nb, hose assy airend to tank, hose assy 1 1/2 tank to tee, air end package 1.11: 1, steel reinforce pvc hose 10mm gre, steel reinforce pvc hose 20mm gre, steel reinforce pvc hose 50mm gre, control system of model e90- e160, hex reducing nipple 1/4 (m) x 1/8 (m), pr regulator, tms elbow x (t), tee pipe , tms coupling x (t), hex nipple , connector hose adapter , hose x 1000l (e132-160), tube 2 mts, spares for compressor of model e132- e160, base & drive system, anti vibration mount - e132- e160, cooling and lubrication system 90-160 wc, o ring 54.2 x 47.2 x 3.5, element, therm valve 155 deg, elbow tms 1 x 1 , tee; pipe; npt, pr transmitter 16 bar, 4.20 ma, filter oil, oil filter indicator, nipple; hex; npt, seperator element 1200 cfm, gasket flange 2 for e160-8 bar, mpv with check valve -mpvl65, pr. releif valve, plug, hex 1 npt, oil sight glass, nipple ; pipe; npt x 300, elbow tms x npt, transparent tube 8x6 1.2, coupling; tms; 1/4 x1/8 npt, o ring id 80.0x2.5 thick, hex nipple, tee pipe, pressure switch 0.2-7.5 bar, pressure guage, spares for compressor of model e75-85, consumable spares list, neuron ii, air filter element, oil filter, element seperator, minimum pressure valve kit, intake valve kit, pr. regulator, coupling drive (or) coupling element, pressure transmitter, temperature sensor, hose assy-a/e to tank, blowdown valve kit, actuator kit, oil sight tube6mmx 4mm - 0.5m, ferrule 6 mm, pipe sets dis sys e75-horizon, pipe assy mpv to hose, hose assy mpv to cooler, pipe assy ms to ball valve, discharge hose, hose oil line, fan assy 23 inch, air inlet & control system, 5/8 x m10 bush reducer, intake valve nc, hex nipple x 1/8 npt, pressure regulator, tee branch x npt, tubing 6mm 1.5m, coupling tms x 1/8 npt, connector npt, ss t bolt clamp dia 170, connector rubber 6 , rubber hose duct connector, ss t bolt clamp, elbow npt, elbow tms x npt, temp sensor, discharge system, tms elbow, minimum pressure valve, water seperator, hose mpv out to ac, scavenging line pipe, tms elbow npt, tms elbow, pressure releif valve 1 npt, o ring, hex reducing nipple, assy strainer, tms elbow, hose assy 80 nb, hex plug 1 npt, oil sight glass tube 0.5m, pipe nipple npt, tube nylon 6x4 1.5m, tms elbow, seperator, pressure transmitter, cooling system, oil cooler & after coller assembly, fan motor 2 hp, lubrication system, elbow 1 x m42, pipe tank to tv, tee branch 1 npt, spin on filter, filter head, element thermal valve, housing thermal valve 1 npt, swivel elbow connector 1 npt, pms coupling 1 bsp x 1 od, swivel elbow connector 1 bsp x 1 od, swivel banjo connector m27 x 2, motor and base assembly system, coupling drive, anti vibration mount motor, anti vibration mount airend, recommended spares for e18-e22 & & e30-e7.5 ac 415v for horizon series kit of spares up