Fasteners Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38604385

23 Dec, 2024 NA

Multi City - Multi State

Tender For supply of neoprene gasket (m16 roof hatch assembly) as per specification no- clw/ms/10/020 alt-9 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38568790

23 Dec, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of 25 kv earthing/discharge rod with working voltage 25 kv ac traction to rdso s pecification no.eti/ohe/51(9/87) with latest a and c slip no.-1(10/92) each discharge rod is to be supplied with 02 nos.rail clamps,the top clamps suitable for 10,12 mm dia.coductor 01 no. each and cable 7.5,1.5 mtr (i.e,total 9 mtr)whole assembly to be supplied in a canvas bag. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38570752

26 Dec, 2024 4.04 Lacs

Mangalore - Karnataka

Tender For providing surge/earthing protection system to chairman bungalow - providing external lightning protection(elp) - supply & installations with:a) 800mm-8mmair termination spike with accessories.b) parallel connector stst (v4a) for rod 7-10mm.c) 8mm round conductor big holder at metal sheet roof, 3mtr,16mm/10mm almgsi air termination rod with accessories-supply & installations with:a) 1mtr,10mmair termination rodb) rod clamp for connecting air termination rods(stst for rod 8-10/rd16mm fsk8.1016skm10x25-v2a)c) 2mtr,16mm almgsi chamfered on both ends air termination rodd) concrete337 circular base 17kg(for air termination rods d-10mm/16mm)e) plastic flat washer d-370mm black for concrete bases-17kgf) connecting clamp for air terminal to roof conductor, 8mm aluminium-magnesium alloy round conductor-rd8/almgsi-with ss holder-supply& installations:a) 8mm aluminium-magnesium alloy round conductor-rd8/almgsi, supply & installation:-8mm round conductor ss holder, supply & installation -8mmround conductor holder for wall& parapet stst with cover plate, supply & installation 8mm round conductor holder-fate roof tile, supply & installation 8mm round conductor holder-tile ridge, supply & installation of connecting sleeve (zdc for rd 8mm with 4 screws m6x10mm), supply & installation of universal cross connector stst, supply & installation of test clamp-round conductor to strip connection, supply & installation of stainless steel 10mm earth conductor, supply & installation of universal cross connector stst, supply & installation of 3mtr,17.2mm copper bonded (ul listed) earth rod with backfill material & accessoriesa)copper bonded (ul listed) earth rod 17.2mm dis, 3000mmlong, 250 micron - 1rodb) terra 20kg fulgurites free backfill material-1bagc) stainless steel earth rod connecting clamp-ss316-1clampd) rcc earth pit chamber 340mmx340mm (frame & cover)-1no, supply & installation of surge protection device(spd)reputed makea) vap dva csp3p100fm combined lightning current &surge arrestor type 1+ type 2 (3ph+n circuit)-installation place: main eb incoming).b) ngate-dga gfftv-combined arrestor: installation place-cable/sattv

Central Government/Public Sector

CTN :38605297

19 Dec, 2024 NA

Kanakapura - Karnataka

Tender For end wall complete pp end for pantry car of lhb amrit bharat coaches. not e:-(1)in drawings "mig welding (131) is to be read as tig welding (141)" as per design lett er no. md46231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufacturing. there may be minor modification in design to suit ralway requirement & modification to be carried out by firm at no furthercost to railway., as per drawing: 981 15010 alt. '-r1', packing instruction: 1. the supplier shall pack the end wall in a suitably des igned returnable fixture in such a way that end wall shall not get scratched, damage d, twisted during transportation, storage and lifting and to avoid scratches on oute r surface. it should be seperated by suitable environment friendly blocks to avaoid ru bbing of two endwall surfaces . it should have standard clamping /fastening mechanis m so that it can be opened easily. it should have firm's identification mark. 2. first retu ranable fixture along with end wall be retained by rcf & this fixture shall be exchang ed in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/fram e to be fabricated having sufficient strenght to bear approximate 2 tonne load in stati c & moving condition of two coach sets of end wall. 4. the fixture /frame/pallet shoul d be designed so that the packed end wall preferably remain in vertical position to min imize surface area. 5. it should also be suitable for storage of end wallunder open sky . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604372

19 Dec, 2024 NA

Kanakapura - Karnataka

Tender For end wall complete npp end for pantry car of lhb amrit bharat coaches. no te:-(1)in drawings "mig welding (131) is to be read as tig welding (141)" as per design let ter no. md46231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufacturing. there may be minor modification in design to suit ralway requirement & modification to be carried out by firm at no further cost to railway., as per drawing: 981 15009 alt. '-r1', packing instruction: 1. the supplier shall pack the end wall in a suitably desi gned returnable fixture in such a way that end wall shall not get scratched, damage d, twisted during transportation, storage and lifting and to avoid scratches on oute r surface. it should be seperated by suitable environment friendly blocks to avaoid ru bbing of two endwall surfaces . it should have standard clamping /fastening mechanis m so that it can be opened easily. it should have firm's identification mark. 2. first retu ranable fixture along with end wall be retained by rcf & this fixture shall be exchang ed in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/fram e to be fabricated having sufficient strenght to bear approximate 2 tonne load in stati c & moving condition of two coach sets of end wall. 4. the fixture /frame/pallet shoul d be designed so that the packed end wall preferably remain in vertical position to min imize surface area. 5. it should also be suitable for storage of end wallunder open sky . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38602921

28 Dec, 2024 NA

Mysore - Karnataka

Tender For supply of impact wrench (q3)

Central Government/Public Sector

CTN :38602924

28 Dec, 2024 NA

Mysore - Karnataka

Tender For supply of impact wrench (q3)

Central Government/Public Sector

CTN :38591110

28 Dec, 2024 NA

Mysore - Karnataka

Tender For supply of impact wrench (q3)

Central Government/Public Sector

CTN :38569640

03 Jan, 2025 NA

Hubli - Karnataka

Tender For supply of set of hexagonal head bolt 1) m10x50mm ms hexagonal head bolt and nut with 1 plain was her, 1 spring washer as per is:1363 or latest. qty 6000 sets 2) plain washer ms of size 10 mm as per is: 20 16 or latest. qty 10,200 nos 3) m6x40mm ss hexagonal head bolt and nut with1 plain washer as per a270 or latest. qty 4200 sets 4) m8x65mm ss hexagonal head bolt and nut with1 plain washer as per a270 or la test. qty 4200 sets 5) m12x50mm ms hexagonal head bolt with checknut with 1 plain washer, 1 spring wa sher as per is: 1363 or latest. qty 6000 sets [ warranty period: 30 months after the date of delivery ]

By Cities

By States

By Agencies

By Ownerships

By Sectors