Aluminum Cladding Tenders

Get complete information related to latest Aluminum Cladding Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminum Cladding Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminum Cladding Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :39408132

28 Feb, 2025 6.85 Lacs

Srinagar - Jammu And Kashmir

Tender For supply, installation testing and commissioning of air handling units, convectors, radiators and piping in the main hospital (providing and fixing of aluminum cladding over already laid insulated piping network in paying ward 2p, 4p and 5p........only

State Government

CTN :39383830

11 Mar, 2025 NA

Delhi - Delhi

Tender For supply of title 1 to 12 - providing, installing, testing and commissioning of silent type diesel generating setcomplying with cpcb iv+ alongwith having prime power rating of 250 kva, 415 volts at 1500rpm, 0.8 lagging power factor at 415v suitable for 50 hz, 3 phase system & for 0.85 loadfactor including credit for dismantle material of old unserviceble dg set and consisting of thefollowings , fabricating, installing, testing & commissioning of automatic mains failure control suitable for250 kva silent type dg set with credit for dismantle material of amf complete with relays,timers, set of cts for metering & protection and energy analyser to indicate currents, phase andline voltages, frequency, power factor, kwh, kvarh & provision for overload, short circuit,earth fault, under frequency, control cabling from amf panel to diesel engine and elsewhere ifrequired, all complete and interlocking including the followin , supplying and fixing exhaust gas piping of suitable dia. welded black ms, b class pipeconforming to is:3589 cut to required lengths and installed with necessary bends, supports andclamps, anti-vibration mountings, insulation of exhaust system with mineral wool/rockwool, 50mm thick wiremesh & aluminum cladding etc., as required as per specification , supply and laying of of 3.5 x 185 sq mm sizes of xlpe insulated pvc sheathed aluminiumconductor armoured power cable of 1.1 kv grade confirming to is:7098 (part 1) includingmaking connection with suitable size of aluminum lugs, laying on wall/surface, testing etc. asrequired. , supply, installation, commissioning & testing of complete set of maintenance free chemicalearthing with copper bonded electrode suitable dia & length 50 x 6 mm pure copper internalstrip with suitable terminal, ground enhancement material / back fill compound / groundingcompound of permanent & maintenance free nature. (50 kg. for each earth pit) , providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. asrequired. , sitc of clean agent based tube fire suppression system 2 kg 10 mtr. heat sensing ul listedtube with ul listed fk5-1-12 clean agent gas , supply & laying of 10 core x 2.5 sq mm copper conductor control cable of insulation:-xlpe(cross linked polyethylene / pvc), inner sheath:- pvc (polyvinyl chloride) st-2 / frls,armouring:- galvanized steel flat strip or round wire, outer sheath:-pvc (polyvinyl chloride)st-2 / frls i/c making connection, testing, laying on wall/surface & commisioning etc completeas required , supply & laying of 3 core x 2.5 sq mm copper conductor control cable of insulation:-xlpe(cross linked polyethylene / pvc), inner sheath:- pvc (polyvinyl chloride) st-2 / frls,armouring:- galvanized steel flat strip or round wire, outer sheath:-pvc (polyvinyl chloride)st-2 / frls i/c making connection, testing, laying on wall/surface & commisioning etc completeas required , supplying and making end termination of size 3 x 185 sq. mm (57mm) with brass compressiongland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpealuminium conductor cable of 1.1 kv grade as required. , 1 supply installation testing and commissioning of avm pads ecs 25x400 suitable for dg set. 1 , supply of high speed diesel for operation of dg set i/c cartage filling etc. complete as require

State Government

CTN :39277412

24 Feb, 2025 NA

Tirumala - Andhra Pradesh

Tender For supply of electrical fixtures to newly constructed q complex at east side of s v s devasthanam, dwaraka tirumala-, supply of 48" (1200mm) sweep 5 star rated bldc (brush less direct current) ceiling fan with double ball bearings, input voltage 230v ac converted to 24 v dc, power input not more than 32w , air delivery 210/220 cubic meter/min with remote and without regulator. supply and transportation of 60w led high bay/ wall mounted type luminaries with high power cob led made of pressure die cast aluminum housing with powder coated, supply input voltage 120 - 270 v ac, p.f > 0.90, high power led's having efficacy >100 lumens/watt, system efficacy >95lm/w and junction temperature < 70c, with ingres protection ip66, ik05, driver surge protection 4kv, in house additional surge wide/ narrow beam optics, thd<10% at 110 volts ac, driver efficiency >90%, , cct: 3000k - 5700k, minimum cri>70, etc., complete, supply and fixing of 20-24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts with pf>0.9, surge protection: 2kv,thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, .etc., complete.

Central Government / Public Sector

CTN :39265255

03 Mar, 2025 NA

Guntakal - Andhra Pradesh

Tender For supply of led flood light fittings of 200 watts with suitable driver and with all connected materials as per the model no:at_fl_200 of ascentech make consisting the features of luminaires body must be corrosion resistant pow der coated flood light with the luminaires casing/housing shall be spun aluminum/die cast aluminum with higher ther mal conductivity with is: 0322-5:5:2013 or latest and should confirm with cee/scr specification no: scr/led (od)light fittings/003 (amdt-04)2017 with ip66. makes: havells, bajaj, crompton,phillips or similar. as per specification attache d. ]

Central Government/Public Sector

CTN :39198382

28 Feb, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/kc-09/ammonia compressor spares/216/330 - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50

Loading, Please wait...

Aluminum Cladding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector