Latest butt plate Tenders | Government butt plate Tenders

CTN :38531857

24 Jan, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of spares of hot air dampers of unit-iandii boilers - bearing holder , drive shaft, , slvae shaft , slvae shaft , stub shaft , follower plate , shaft colla , stud , gland , gland plate, , blade pinrod

CTN :38988382

14 Feb, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of waer ring , bell cutless bush , impeller wear ring , impeller key , thrust ring , thrust ring retainer , cutless bush d-bowl-upper , cutless bush d-bowl- lower , pump shaft , line shaft , shaft sleeve , cutless bush , line shaft coupling , split ring , key , packing box , sleeve p-box , gland split type , packing , bush , lantern ring , tbh assly with non reverse ratchet , head shaft , adjusting nut , parallel key motor side , parallel key head shaft side , shaft coupling line shaft , sleeve , split packing gland , deflector , sleeve packing box , sleeve retainer plate , thrust bearing housing , key motor side

corporations/Associations/Others

CTN :38934127

03 Feb, 2025 NA

Bardhaman - West Bengal

Tender For supply of complete mechanical seal type p23d064 along with sleeve n gland plate(complete cartridge)

corporations/Associations/Others

CTN :37844348

27 Jan, 2025 NA

Parichha - Uttar Pradesh

Tender For corrigendum : spares of had of mill xrp-903 - 104020202 comp packing gland assly had, complete packing gland assembly for hot air damper (1250x1600) , consists of1) gland plate 6 no. (pl 20x110x176)2) gland 6 no. (od 74 /id 56.5; 32)3) packing rope 1 no. (6mm sq 3.8rm) material code 96-145-0644) bearing holder 6 no. (rod d.55.5;62) ,5)self lubricating bearing 8 no. (sh 0.76x45x142.2) material code 96-145-0636)follower plate 6 no. (pl 40x110x180) material code 15-011-1847) stud and lock nuts, 0104020202 comp set of had shaft xrp903, complete set of hot air dampler shaft, for bowl mill xrp 903, consists of1) drive shaft 1 no. (dia 44.5;739), material code 15-024-1592) slave shaft-i 1 no.(dia 44.5;625), material code 15-024-1593) slave shaft-ii 1 no.(dia 44.5;372), material code 15-024-1594) stub shaft 3 no.(dia 44.5;255), material code 15-024-159, 0104020202 blade pin dia 14 for had,blade pin dia 14;90, 0104020202 shaft collar dia 44.5 for had, shaft collar dia 44.5 material code 96-145-040, 0104020202 sh 1.6 (od106/id47) for had, sh 1.6 od 106/ id 47 material code 15-011-350

CTN :38809945

20 Jan, 2025 1.00 Lacs

Shajapur - Madhya Pradesh

Tender For corrigendum : supply of orthopedic implant - nailing system for trauma, inter locking nail for tibia-all sizes with 4 locking bolt set, expert tibial nailing system (titanium) all sizes system with all bolts set, distal tibia nail-all sizes with 4 locking bolt set, inter locking nail for femur- all sizes with 4 locking bolt set, supracondylar nail-all sizes with 4 locking bolt set, distal femur nail multi lock all sizes with locking bolts, proximal femur nail all sizes with all locking bolts- short and long, proximal femur naila 2 (stainless steel)- short pfn/long pfn all sizes with locking bolt set, proximal femur nail a 2(titanium)-short pfn/long pfn all sizes with locking bolt set, proximal humerus multi lock nail-all sizes with locking bolts, inter locking humers nail-all sizes with 4 locking bolt set, "k" nail for femur-all sizes set, square nail radius with screw set (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter &sizes set, titanium elastic nailing system (tens)-all size (dia.2mm,2.5mm,3mm,3.5mm,4mm,4.5mm) (length 44 cm), plating system for trauma, ao trauma mini set-stainless steel and titanium, ao trauma small set stainless steel and titanium, ao trauma standard set -stainless steel and titanium, dynamic compression plate(d.c.p.small3.5mm) radius/ulna complet set with screw, d.c.p. narrow for tibia /humerus all sizes with 4.5cortical screw compleate set, d.c.p. broad (4.5mm) for femur all sizes with 4.5cortical screw and screw hole set, l.c.p. plate small (3.5mm) all sizes with locking screwhole set, l.c.p. plate narrow (4.5mm) with screw complete set-all sizes, l.c.p. plate broad (4.5mm) with screw complete set, reconstruction plate non locking 3.5mm- allsizes with 3.5 cortical screw set, reconstruction plate locking 3.5mm all sizeswith 3.5 corticals crew set, reconstruction plate nonlocking 4.5mmwith screw complete set, reconstruction plate locking 4.5mm with screwcomplete set, semi tubular plate 4-12 hole all sizes with screws hole set, one third tubular plate 4-12 hole all sizes withscrews hole set, clavicle lateral end plate with screws set, clavicle hook plate with screws set, clavicle locking pre contoured plate 6-10 holewith locking screws set, proximal humerus locking plate (philos) set -4-12hole) plate with required locking screw set, distal humerus locking compression plate-medial & lateral(allsize with screw), lcp extraarticular distal humerus meta physeal locking plate 4 to 12 hole (all size with screw), lcp radial head plate (all size with screw), locking olecrenon plate (all size with screw), hook plate olecranon plate (all sizes withscrews), distal radius locking plates (right/left) 4-8hole, distal radiust plate all sizes withs crews, distal radiusl plate all sizes withs crews, distal radius locking plate variable angle2.7mm and 2.4 mm system all sizes with screws, distal radius rim plate all sizes, mini plate and screws 1.5mm/ 2mm/ 2.7mm set for metacarpals and phalanges, dhs system with d.h.s. plate(round hole)angle 125*, 130*, 135*, 140*, 145* short barrel 4-18 hole, long barrel 4- 18 hole, lag screw with compression screw 50-130 mmcorticals crew (4.5mm size 16mm-40 mm), d.h.s. with trochanteric support plate with lagscrewcomp.set al lsizes (4-8hole) & required cortical screws set, pfn with trochanteric support plate all sizes, proximal femur locking plate all sizes, femoral neck system (fns) all sizes, d.c.s. plate 95*4 hole t o1 2hole, angled blade plate all sizes with screws, double angled blade plate with lag screwall sizes (4-10 holes) with required cortical screws set, pediatric d.h.s. all sizes with 3.5 mm cortical screw set, distal femur locking plate (lateral) (dflcp) 6-18hole, proximal tibia locking plate (ptlcp) 6-15 hole, raft locking plate for proximal tibia setall sizes (5-8hole) with locking screws, l buttress plate right/left all sizes with 4.5cortical screw set, t buttress plate right/left all sizes with 4.5cortical scr

CTN :38859948

27 Jan, 2025 20.00 Lacs

Narmadapuram - Madhya Pradesh

Tender For tender for the purchase of orthopedic implants for the patients admitted in district hospital narmadapuram - interlocking nail for tibia all sizes with 4 locking bolt set, distal tibia nail all sizes with 4 locking bolt set, interlocking nail for femur all sizes with 4 locking bolt set, distal femer condylar nail all sizes with 5 locking bolt set, proximal femur nail a2 (stainless steel) short pfn a2/ with bolt, proximal femur nail a2 (stainless steel) long pfn a2/ with bolt, proximal femur nail plain with bolts (stainless steel) short pfn a2/ with bolt, proximal femur nail long with bolts (stainless steel) long pfn a2/ with bolt, interlocking humers nail all sizes with 4 locking bolt set, ph humers nail with all size bolt, trauma implants dynamic compression plate d.c.p.small radius/ulna complet set with screw (4 hole to 12 hole), d.c.p.narrow for tibia/humers all sizes with 4.5 cortical screw complete set (5 hole to 16 hole), d.c.p. broad for femur all sizes with 4.5 cortical screw & screw hole set, special plate " t" butteress plate for tibia all sizes with 4.5 cortica screw & 6.5mm cancellous screw hole set, "l" butteress plate right/left"t"butteress plate all sizes with 4.5 cortical screw & 6.5mm cancellous screw hole set, l.c.p. plate small all sizes with locking screw hole set, l.c.p. plate narrow with screw complete set, l.c.p. plate broad with screw complete set, "y"plate all sizes with locking bolt set, reconstrucition plate 3.5mm all sizes with 3.5 cortical screw hole set, reconstrucition plate 4.5mm with screw complete set, semi tubular plate all sizes with screw hole set, dhs system with d.h.s. plate. a.o.type (round hole) angle 125*, 130*, 135*, 140*, 145* all sizes lag screw (50-110mm)compression bolt long barrel plate (4-8 hole, 1250-1450) cortical screw 6 (4.5 mm sizes 16mm - 40mm) small (4-6 hole) / medium (7-12, d.h.s.plate a.o. type short barrel angle 130*, 135* with hip screw all sizes and required 4.5 mm cortical screw as one set & lag screw hole set, d.c.s.plate(angled blade plate)95* complete set all sizes with hip screw and required cortical screw as one set & lag screw, "k"nail for femur dia all sizes set, square nail radius (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, cancellous screw 4.0mm titanium 15mm to 50mm each, cannulated cancellous screw 6.5mm, 16 and 32mm stainless steel 25 mm to 110mm each, cannulated cancellous screw 6.0mm titanium 15mm to 65mm each, cannulated cancellous screw titanium 4.0mm 20mm to 70mm each, cannulated cancellous screw stainless steel 4.0mm 20mm to 70mm each, pin & wire thredad "k" wire double ended dia 1mm, to 3.5mm, all sizes & length each, "k" wire 1mm to 3.5mm each, s.s.wire reel 16 to 18, 20 gz each 5 meter, steinman pins 3mm, to 6mm each, denham pins 3mm, to 6mm each, a.o.type external fixator system 6 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp- 10*10 connecting rods 10mm all length)all sizes, a.o.type external fixator system 10 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp 10*10 connecting rods 10 mm all length)all sizes, a.o. type external fixator radius/ulna connecting rods 4mm close clamp-2.5*4mm all length complete set, external fixator ilizarov four ring complete set (all sizes 80mm to 240mm italian femural arches 90*, 120* all sizes multiple fixtion clams schanz pin fixtion bolts oblique supports threaded rods all sizes (75mm to 400mm,) telescopic rod all sizes (75mm to 350mm) post male/female all sizes hinges female/male 1 hole set ilizarov wires baynot type all sizes olive wire all sizes connecting bolt connecting nut 10mm wire fix. bolts cannulated/slotted complete set, external fixator ilizarov three ring complete set (all sizes 80mm to 240mm italian femural arches 90*, 120* all s

Central Government And Public Sector

CTN :38658244

17 Jan, 2025 27.86 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : supply of sintech precision make various vertical pump spares - impeller , sintech , svt 100 208 33 , guard ring , sintech , svt 100 208 33 , split ring , sintech , svt 100 208 33 , rubber bush set , sintech , svt 100 208 33 , bush , sintech , svt 100 208 33 , rubber bush , sintech , svt 100 208 33 , stb box bush , sintech , svt 100 208 33 , wear rng-csg , sintech , svt 100 208 33 , gland packing , sintech , svt 100 208 33 , lantern ring , sintech , svt 100 208 33 , gland piece , sintech , svt 100 208 33 , pump shaft , sintech , svt 100 208 33 , line shaft , sintech , svt 100 208 33 , top shaft , sintech , svt 100 208 33 , top shaft sleeve , sintech , line shaft sleeve , sintech , svt 100 208 33 , gland hsg , sintech , svt 100 208 33 , gasket , sintech , svt 100 208 33 , line sft cplg , sintech , svt 100 208 33 , implr , sintech , svt 200 33a , guard ring , ss , sintech , svt 200 33a , split ring , ss , sintech , svt 200 33a , bush f by dfsr , sintech , svt 200 33a , bush , sintech , pump , svt 200 33a , bush , brz , sintech , svt 200 33a , bush , sintech , svt 200 33a , stuf box bush , brz , sintech , svt 200 33a , wear ring , sintech , svt 200 33a , gland pckg , sintech , svt 200 33a , lntrn ring , brz , sintech , svt 200 33a , gland piece , sintech , pump , svt 200 33a , implr sft , ss , sintech , svt 200 33a , line shaft , ss , sintech , svt 200 33a , hd sft , ss , sintech , pump , svt 200 33a , top sft slv , ss , sintech , pump , svt 200 33a , line sft slv , ss , sintech , svt 200 33a , glnd hsg , sintech , pump , svt 200 33a , line sft cplg , ss , sintech , svt 200 33a , casing , sintech , stfv 25x250 , impeller , sintech , stfv 25x250 , shaft , sintech , stfv 25x250 , line shaft , sintech , stfv 25x250 , head shaft , sintech , stfv 25x250 , shaft sleeve , sintech , stfv 25x250 , top shaft sleeve , sintech , stfv 25x250 , lin sft slv , sintech , glnd hsg , sintech , stfv 25x250 , pin bsh cplg , sintech , stfv 25x250 , lin sft cplg , sintech , stfv 25x250 , bush , sintech , stfv 25x250 , bush , sintech , stfv 25x250 , stf box bush , sintech , stfv 25x250 , glnd pckg , sintech , stfv 25x250 , gland piece , sintech , stfv 25x250 , casing , sintech , pump , sappv100x260 , impeller , sintech , pump , sappv100x260 , wear plate , sintech , pump , sappv100x260 , pump shaft , sintech , pump , sappv100x260 , line shaft , sintech , pump , sappv100x260 , top shaft , sintech , pump , sappv100x260 , sft slv , sintech , pump , sappv100x260 , sft slv , sintech , pump , sappv100x260 , line sft slv , sintech , pump , sappv100x260 , gland hsg , sintech , pump , sappv100x260 , line sft cplg , sintech , pump , sappv100x260 , btm clmn pipe csg , sintech , sappv100x260 , bush , sintech , pump , sappv100x260 , stuff box bush , sintech , pump , sappv100x260 , gland pckg , sintech , pump , sappv100x260 , gland piece , sintech , pump , sappv100x260

CTN :38911110

10 Feb, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of different types of mechanical and electrical material required for operation of narmada water supply project on rate contract basis under wwd. - o ring 6mm, , make- reputed, o ring 4mm, , make- reputed, filter capacitor, 1000 fd, 450 vdc,, make- sfpl, resistance of, 110 ohms, make- reputed, temperature switch for soft starter , 110 vdc, make- reputed, x- timer (a1 d1) for soft , 110 vdc , make- eapl, ammeter, 0-300/600a class 1.5 eq , make- rishabh/eqv, fcma thermistor relay, 1c/o aux supply 110v dc, make- kana/eqv, indication lamp , 110 vdc led type red white green amber, make- altos/eqv, bridge rectifier, 15a 1ph md6 bu15, 04, make- mde, air break ( aux) contactor relay , 3th30-22-0b 2no+2nc, make- siemens, by contactor, mno dc 22e 110vdc coil, make- l&t eqv, limit switch , 2no/2nc 250v , make- auma, filter capacitor, 1000 fd, 450 vdc,, make- sfpl/ eqv, resistance of, 110 ohms, make- reputed, temperature switch for soft starter , 110 vdc, make- reputed, x- timer (a1 d1) for soft , 110 vdc , make- eapl, ammeter, 0-300/600a class 1.5 eq , make- rishabh/eqv, fcma thermistor relay, 1c/o aux supply 110v dc, make- kana/eqv, indication lamp , 110 vdc led type red white green amber, make- altos/eqv, bridge rectifier, 15a 1ph md6 bu15, 04, make- mde, air break ( aux) contactor relay , 3th30-22-0b 2no+2nc, make- siemens, by contactor, mno dc 22e 110vdc coil, make- l&t eqv, ht capacitor bank , 126.67kvar ,3.81kv,1ph,app type , make- madhav capacitors, series reactor , 0.2% dry type cu wound 0.76kvar,6.6kv,3 ph, 50hz, make- madhav capacitors, hrc fuse, 7.2 kv, 90 a ahghc, make- copper bussmann, oil temperature meter, 0-150 c, make- pc, winding temperature meter, 0-150 c, , make- pc, timer, a1 d1 250 v ac/28 vdc 0-30 sec, make- eapl, contactor(aux), 2 no+ 2nc 3th30, 230 vac, make- siemens, contactor, 3tf30, make- siemens, breather, size 5 kg, as per sample, breather, size 1 kg, as per sample, silica gel , , make-, sf6 gas as per sample, closing coil , 110 v dc, make- c.g., tripping coil , 110 v dc, make- c.g., pg clamp, for 22 mm panther conductor, make-, cable joint kit (end), 3 core , 240 mm , make- recon, cable joint kit (straight through), 3 core , 240 mm , make- recon, la, 132 kv, 10 ka, make- cg, closing coil , 110 v dc, make- cg, rtd , dial size 6 inchi conatct rating 240v ac 5amp. built in relay type range 0 to 150.centigrate , make- sc, master trip relay, type avajh 13, 110 v dc, cont 4 no+ 1nc, make- ashida elect. pvt., trip supervisory relay, atsr 31a, aux 110 v dc, make- ashida elect. pvt., dc fail sensing relay, ava11 cont 2 no+2nc, 110 v dc, make- ashida elect. pvt., instantaneous earth fault relay, cag, c.t. sec 5 amp, make- areva, oc/ef protection relay, aux 77- 250 v dc, ct 1a/5a, make- ashida elect. pvt., under voltage relay, asuv, aux 77-250 vdc/pt 110 v ac, make- ashida elect. pvt., multifunction meter (3 ), rish delta energy, ptr 6.6kv/110, ctr 250/5a, make- rishabh, ammeter, 0- 1500 , 250/5 a, make- rishabh, voltmeter, 0- 9 kv, 6.6/110 v, make- rishabh, ammeter, 0-500 a, make- rishabh, ammeter, 0-800 a, make- rishabh, voltmeter, 0- 600 v, make- rishabh, end cable joint kit 1cx800sqmm, xlpe,11 kv, make- gmg/raychem, end cable joint kit 3cx240sqmm, xlpe,11 kv, make- gmg/raychem, end cable joint kit 3cx150sqmm, xlpe,11 kv, make- gmg/raychem, end cable joint kit 3cx95sqmm, xlpe,11 kv, make- gmg/raychem, straight through cable jointing kit 3cx95sqmm, xlpe,11 kv, make- gmg/raychem, end cable joint kit 1cx185sqmm, ab cable,11 kv, make- gmg/raychem, straight through cable jointing kit 1cx185sqmm, ab cable,11 kv, make- gmg/raychem, end cable joint kit 3cx300sqmm, xlpe,11 kv, make- gmg/raychem, straight through cable jointing kit 3cx300sqmm, ab cable,11 kv, make- gmg/raychem, ammeter, 0-30 a, make- rishabh, voltmeter, 0-500 v, make- rishabh, hydrolic oil, servo 68, make- indian oil, grease , servo gem 2 or eqvt., make- indian oil, cotton waste, , make-, gland plate, ms is 2062, make- kirloskar, liquid deflec

Central Government/Public Sector

CTN :38869862

10 Feb, 2025 NA

East Singhbhum - Jharkhand

Tender For rc for warman pump spares - pump models / spares, a. warman pump, model:- 1.5/1 bahclamp bolt & nut, part no:-b012me62 (ms), adjusting screw, nut & washer, part no:-b001me62 (ms), end cover gasket/shim set, part no:-b025p50, end cover set screw, part no:-b027me62 (ms), labyrinth, part no:-b062-10d81 (sgi), piston ring, part no:-b108g02 (ci), shaft, part no:-b073me03 (en-8bs970), end cover, part no:-b024-10d21 (ci), bearing housing, part no:-b004mg01 (ci), clamp washer , part no:-b011e62 (ms), fpl insert, part no:-b1041a05 (ultracrome 27% cr), volute liner, part no:-b1110a05(ultracrome 27% cr), impeller, part no:-b1127a05 (ultracrome 27% cr), frame plate, part no:-b1032g01 (ci), cover plate, part no:-b1013g01 (ci), discharge joint ring, part no:-b1132xlps01 (rubber), intake joint ring, part no:-b1060s01 (rubber), volute liner seal(frame seal), part no:-b1125s01 (rubber), cover plate bolt & nut, part no:-b015me62 (ms), frame plate stud & nut, part no:-b039e62 (ms), o ring shaft sleeve, part no:-b109s10 (rubber), gland, part no:-b044c23, ss-316, shaft sleeve, part no :-b075c23, ss -316, gland bolt,nut & washer, part no:-a045mc23 ,ss-316, gland clamp bolt & nut, part no:-b126mc23, ss-316, lantern restrictor, part no:-b118c23 ,ss-316, stuffing box, part no:-b078g01 (ci), seal ring, part no:-b122r11 (rubber), bearing assembly, part no:-b005m, o ring impeller sealing, part no:-b217s10 (rubber), shaft spacer, part no:-b117c21 (ss), grease retainer, part no:-b046g01 (ci), labyrinth locknut, part no:-b061-e62 (ms), clamp washer, part no. b011e63, base, part no. b003mg01, impeller, part no :-b1052r55, natural rubber, cover plate liner , part no. b1017r55, natural rubber, frame plate liner, part no. b1017r55, natural rubber, expeller, part no :-b028c23, ss- 316, expeller ring, part no :-b029c23, ss- 316, lantern ring, part no :-b063c23, ss - 316, neck ring, part no :-b067c23, -ss-316, frame plate liner stud, part no. b026me62, ms, b. warman pump, model:- 2/1.5 bah tag no. :- 9p-13a/b , 22p-5a/b/c , 9p-9a/bvolute liner seal, part no :-b15125s01 (rubber), cover plate bolt & nut, part no :-b015me63 (cs), frame plate stud, part no :-b039e62 (ms), seal ring, part no :-b122s44 (rubber), lantern ring, part no :-b063c23, ss-316, grease retainer, part no :-b046d21 (sgi), stuffing box, part no :-b078g01 (ci), grease cup, part no :-wp2l82-l (ms), grease cup adapter, part no :-b138e62 (ms), expeller, part no :-b028c23, ss- 316, expeller ring, part no :-b029c23, ss-316, neck ring, part no :-b067c23, ss-316, o ring, part no :-b217s10 (rubber), impeller, part no :-b15127a05 (ultrachrome 27%cr), shaft, part no :-b073me03 (cs), shaft spacer, part no :-b117c21 (ss), volute liner, part no :-b15110a05 (ultrachrome 27%cr), shaft sleeve, part no :-b075c23, ss -316, o ring, part no :-b109s10 (rubber), bearing assembly, part no :-b005m, bearing housing, part no :-b004mg01 (ci), gland, part no :-b044c23 ,ss-316, end cover, part no :-b024-10d21 (sgi), clamp bolt, part no :-b012me62 (ms), adjusting screw, part no :-b001me62 (ms), end cover set screw, part no :-b027me62 (ms), labyrinth, part no :-b062-10d81 (sgi), labyrinth locknut, part no :-b061e62 (ms), piston ring, part no :-b108g02 (ci), clamp washer, part no :-b011e62 (ms), fpli, part no :-b15041a05 (ultrachrome 27%cr), frame plate, part no :-b15032g01 (ci), cover plate, part no :-b15013g01 (ci), disc joint ring, part no :-b15132ls01 (rubber), int jt ring, part no :-d15060s01 (rubber), gland clamp bolt, part no. b126mc23, base, part no. b003mg01, end cover gasket / shim ;pt no :- b025p50, grease nipple, impeller, part no :-b15127r55, natural rubber, cover plate liner, pt.no. b15017r55, natural rubber, frame plate stud, part no :-b039me63, ms, frame plate liner, part no.: b15036mr55, natural rubber, shaft, part no. b073me03, cs, lantern restrictor, part no. b118c23, ss-316, gland bolt, nut & washer, part no. b045mc23, ss316, frame plate liner stud -1 thin self lock nut, part no.

Central Government/Public Sector

CTN :38878105

30 Jan, 2025 NA

Dhubri - Assam

Tender For provision of power supply at proposed isolation bay near 05 and 23 end of runway at rupsi airport-1 supplying of following size of 1.1kv grade multistrand aluminium conductor xlpe insulated pvc sheathed armoured power cable (as per is: 7098:1988 with upto date amendments) complete as required. (i) 3.5 core, 300 sqmm. meter 200 (ii) 3.5 core, 95 sqmm. meter 1800 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (i) above 185 sq. mm and upto 400 sq. mm meter 146 (ii) above 35 sq. mm and upto 95 sq. mm meter 1755 3 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal/ hdpe pipe as required. (i) above 185 sq. mm and upto 400 sq. mm meter 24 (ii) above 35 sq. mm and upto 95 sq. mm meter 45 4 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required: (i) above 185 sq. mm and upto 400 sq. mm meter 30 5 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required: (i) 3 x 95 sq. mm (45mm) set 2 (ii) 3 x 400 sq. mm (82mm) set 2 6 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930. part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. od 200 mm dia meter 69 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double, door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy, fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming &, outgoing cables including supply & fixing the following items and interconnections, wiring with suitable size, wires/cables and including all civil works like excavation, pcc, brick work pedestal, plastering, refilling etc. and, as per specifications as required. incomer: 250a 4p 36ka tm mccb with ol/sc protection-2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, (iii) 230v uv coil-2 nos, (iv) 1co aux +tac- 2 nos, (v) indicating lamp on , off, trip 230v ac - 6 nos, (vi) phase indicating lamp r , y, b , 230v ac- 6 nos, (vii) 6a , mcb ,sp 10ka- 2 nos, (viii) 250/5, 15va, cl-1, c.t - 6 nos, (ix) 1ph digital volmeter , 230v ac - 2 nos, (x) voltmeter selector switch- 6 nos, (xi) 1ph digital ammeter , 230v ac -2 nos, (xii) ammeter selector switch- 2 nos, (xiii) 2no+2nc auxiliary contactor 220v ac- 2 nos, buscoupler:, 250a 4p 36ka tm mccb with ol/sc protection - 1 no, (i) spreader-1 no, (ii) extended rotary handle- 1 no, (iii) 230v uv coil-1 no, (iv) 1co aux +tac- 1 no, set 1, (v) indicating lamp on , off, trip 230v ac - 3 nos, (vi) 2no+2nc auxiliary contactor 220v ac- 3 nos, outgoing:, 160a 4p 36ka tm mccb with ol/sc protection( active + standby) - 2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, outgoing:, 63a 4p 36ka tm mccb with ol/sc protection- 2 nos, (i) extended rotary handle- 2 nos, outgoing:, 32a 4p 36ka tm mccb with ol/sc protection- 1 no, (i) extended rotary handle- 1 no, others:, 3pin plug & socket- 1 no, 8 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming & outgoing cables including supp

Butt Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector