Latest butt plate Tenders | Government butt plate Tenders

corporations/Associations/Others

CTN :38602179

07 Jan, 2025 NA

Bangalore - Karnataka

Tender For supply of titanium interference screws 20 to 40mm of 6 to 12mm size , peek interference screws , bioabsorbable interference screws , bio composite interference screws , suture disk for tibial fixation , cortical tibial suspension fixation device , spiked ligament staples , acl fixation button with fixed loop and preloaded passing suture , acl fixation button with adjustable loop and preloaded passing suture , all inside meniscus repair device with implant , beath pin-guide wire with eye , 4.5 mm cannulated drill bit for femoral tunnel preparation in acl surgery , inside out meniscus repair needles , acromioclavicular joint dislocation repair system with button on oneside and suture disk on other side , disposable suture passer mini-knee , disposable suture passer standard shoulder , multifire scorpion needle compatible to arthrex shoulder scorpion system , uhmw 2-0 number fiberwires , uhmw fibertape , shoulder cannula , shoulder cannula twist in cannula 6mm , shoulder cannula twist in cannula 8mm , passport button cannula , all suture anchors 1 to 2 mm , all suture anchors 2 to 3 mm single loaded , all suture anchors 4 to 6 mm single loaded , knotted titanium anchors 2 to 3 mm single loaded , knotted titanium anchors 3 to 4 mm single loaded , knotted titanium anchors 4 to 6 mm single loaded , knotted titanium anchors 2 to 3 mm double loaded , knotted titanium anchors 3 to 4 mm double loaded , knotted titanium anchors 4 to 6 mm double loaded , knotted peek anchors 2 to 3 mm single loaded , knotted peek anchors 4 to 6 mm single loaded , knotted peek anchors 2 to 4 mm double loaded , knotted peek anchors 4 to 6 mm double loaded , knotless titanium anchors 4 to 6mm , knotless titanium anchors 2 to 4mm , knotless peek anchors 2 to 4mm , knotless biocomposite anchors 4 to 6mm , bioabsorbable anchors single loaded 2 to 3mm , bioabsorbable anchors single loaded 4 to 6mm , bioabsorbable anchors double loaded 2 to 3mm , bioabsorbable anchors double loaded 4 to 6mm , latarjet screws , disposable suture passer for capsular repair , radiofrequency ablator compatible with arthrex system dcp set 3.5mm, narrow dcp set 4.5mm, broad dcp set 4.5mm, lcp set 3.5mm, narrow lcp set 4.5mm, broad lcp set 4.5mm, t plate, right angled for distal radius, t plate, oblique angled for distal radius, variable angle lcp system for distal radius, locking plate system for distal radius, radial head and neck fixation plate set , calcaneal plate set 3.5mm, lcp metatarsal plates titanium 2.4 and 2.7mm, mini plate hand set 1.5mm, titanium, locking t plate set 2mm, titanium, locking plates, 2mm plates for hand, titanium, one third tubular plate set 3.5 mm, ss, one third tubular locking plate set 3.5 mm, ss, t buttress plate 4.5mm, ss, l buttress plates 4.5mm, ss, y reconstruction plates 3.5mm, ss, reconstruction plate 3.5 mm, ss, straight pelvic reconstruction plate with 3.5mm, ss, curved pelvic reconstruction plates, quadrilateral acetabular with cortical and locking plate, acetabular hook plate,ss, pelvis locking reconstruction plates 3.5mm, ss, proximal humeral locking plate, distal humerus medial locking plate, distal humerus posterior locking plate, distal humerus lateral locking plate, locking distal humerus extra articular plate set, olecranon hook plate, locking olecranon plate, distal lateral femoral locking plate set, distal medial femoral locking plate set, proximal lateral tibial locking plate 4.5mm set, proximal medial tibial locking plate 4.5mm set, variable bid details/ 2 / 56

Central Government/Public Sector

CTN :38568875

20 Dec, 2024 NA

Multi City - Multi State

Tender For supply of lcp t-buttress plate 4.5/5mm 3 -6holed with required number of locking and non locking screws [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

CTN :38513128

30 Dec, 2024 NA

Birbhum - West Bengal

Tender For supply and delivery of steel materials and fasteners for overhauling of unit-4 under bm dept. at bktps. - wear resistant plate 2600x7000x8 th for fluegas duct sailhard plate, angle,ms 75x75x6mm,isma # additional data:make: tata/sail/jindal, channel,ismc 125,is:2062additional data:make: tata/sail/jindal, pipe,erw black pipe,size:80 n.b #is-1239(part-1) heavy duty# for supplyingconveying air in mrs additional data:make: tata/sail/jindal, pipe,ms,erw,od:140mm,id:130 mm #is:1239 (part-1),heavy grade# for mill rejectsystem of bowl mill, plate,ms,3.15 mm,ismp #additional data:make: tata/sail/jindal, angle 65x65x6mm structural steel #as per is-1977-1975(2nd rev)additional data:make: tata/sail/jindal, angle 50x50x6mm structural steel #ordinary quality,as per is-1977-1975(2nd rev)additional data:make: tata/sail/jindal, beam,i-beam ismb 125additional data:make: tata/sail/jindal, m.s.plate, thick- 12mm #additional data:make: tata/sail/jindal, gp sheet,0.630x900x2500mmadditional data:size-thickness-0.63xlength(1500-4000mm)x width(900-1500mm), channel,ismc 150,is:2062additional data:make: tata/sail/jindal, ss plate,aisi 304,t3.15xl3xw1.5m #as per astm a240 & bs 1449additional data:make: tata/sail/jindal, plate,ms,16 mm ismp #additional data:make: tata/sail/jindal, ms washer plain for m16,thickness 3 mm, fastener ms washer plain for m20 boltthickness 3 mm, bolt,ms,hex head,full thread,m12x40, bolt with nut,hex head ms,m10x40 ft#, fastener screw,socket head cap screwm 24 x 90 mm,full thread,grade 12.9additional data:make: tvs/unbrako, screw,socket head cap screw a m 30x230grade 12.9, cap screw,hex socket head ,m 20 x 50 mmfull thread,grade 12.9, screw,socket head cap screw,m20 x 60 #for lubricator,size 1#,model v250additional data:make: tvs/unbrako, fastener,stud ht stud m20x140additional data:make- unbrako, bolt, hex hd, m24x60, ft, gr 10.9, htas per is:1364, iso4014/4017, thread: iso metric(coarse) 6g as per is:4218, material: high gradealloy steel-property class-10.9 as per is:1367additional data:make: tvs/unbrako, bolt ht m12x40 hex head full threadgrade 10.9additional data:make: tvs/unbrako, fastener ht bolt m16x50full thread grade 10.9additional data:make: tvs/unbrako, fastener ht bolt m16x40 hex headfull thread,grade 10.9additional data:make: tvs/unbrako, fastener ht bolt m16x60 hex headfull thread,grade 10.9additional data:make-tvs/unbrako, fastener ht nut m16,hex,grade 10 #additional data:make: tvs/unbrako, fastener ht nut m12additional data:make: tvs/unbrako, washer size: m12 material: ht grade-10.9 #additional data:make: tvs/unbrako, washer,m16 material: ht grade-10.10 #additional data:make: tvs/unbrako, fastener ms washer plain for m8 boltthickness 1.6 mm, fastener ht stud m16x40 grade 10.9additional data:make: tvs/unbrako, bolt,hex hd, m10x40, ft,gr 10.9, htas per is:1364, iso4014/4017, thread: iso metric(coarse) 6g as per is:4218, material: high gradealloy steel-property class-10.9 as per is:1367,full threadadditional data:make: tvs/unbrako, bolt, hex hd, m8x40, ft, gr 10.9,htas per is:1364, iso4014/4017, thread: iso metric (coarse) 6g as per is:4218, material: high gradealloy steel-property class-10.9 as per is:1367additional data:make: tvs/unbrako, ht nut m8,grade 8additional data:make: tvs/unbrako, fastener split pin size 3x50 mm ss-316 #additional data:split pin size 3x80 mm, ss316, fastener split pin size 4x60 mm ss-316 #, bolt ht m6x30 hex head full threadgrade 10.9additional data:make: tvs/unbrako, screw,grab screw m8 ? 15 mmadditional data:make: tvs/unbrako, nut,m10 #additional data:make-unbrako, plate checker (m.s),th 6mm tata/sail #additional data:make: tata/sail/jindal, screw cap soc.head m10x55 gr.10.9additional data:make, tvs, fastener ht nut m20,grade 10additional data:make- unbrako/tvs, bolt, hex hd, m20x65, ft, gr 10.9, htas per is:1364, iso4014/4017, thread: iso metric(coarse) 6g as per is:4218, material: high gradealloy steel-property class-10.9 as per is:1367, ht bolt m20x70 hex head,grade 10.9full thread

CTN :38491977

27 Dec, 2024 6.00 Lacs

Sheopur - Madhya Pradesh

Tender For supply of orthopedic, neuro and dental implant equipment district hospital sheopur - name of ortho implant, nailing system for trauma, interlocking nail for tibia- all sizes with 4 lockingbolt set, expert tibial nailing system (titanium) all sizessystem with all bolts set, distal tibia nail - all sizes with 4 locking bolt set, interlocking nail for femur - all sizes with 4 lockingbolt set, supracondylar nail - all sizes with 4 locking bolt set, distal femur nail multilock all sizes with locking bolts, proximal femur nail all sizes with all locking bolts -short and long, proximal femur nail a2 (stainless steel) - shortpfn /long pfn all sizes with locking bolt set, proximal femur nail a2 (titanium) - short pfn /long pfn all sizes with locking bolt set, proximal humerus multi lock nail- all sizes withlocking bolts, interlocking humers nail- all sizes with 4 locking boltset, k nail for femur- all sizes set, square nail radius with screw set (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, titanium elastic nailing system (tens)-all size (dia.2mm,2.5mm,3mm,3.5mm,4mm,4.5mm)(length 44 cm), plating system for trauma, ao trauma mini set - stainless steel andtitanium, ao trauma small set - stainless steel andtitanium, ao trauma standard set - stainless steel andtitanium, dynamic compression plate (d.c.p.small 3.5mm)radius/ulna complet set with screw, d.c.p.narrow for tibia / humerusall sizes with 4.5cortical screw compleate set, d.c.p.broad (4.5 mm )for femur - all sizes with 4.5cortical screw and screw hole set, l.c.p.plate small (3.5 mm) all sizes with locking screwhole set, l.c.p.plate narrow (4.5 mm) with screw complete set-all sizes, l.c.p.plate broad (4.5 mm) with screw complete set, reconstruction plate non locking 3.5mm- allsizes with 3.5 cortical screw set, reconstruction plate locking 3.5mm - all sizeswith 3.5 cortical screw set, reconstruction platenon non locking 4.5mmwith screw complete set, reconstruction plate locking 4.5mm with screwcomplete set, semi tubular plate 4-12 hole all sizes with screws holeset, one third tubular plate 4-12 hole all sizes withscrews hole set, clavicle lateral end plate with screws set, clavicle hook plate with screws set, clavicle locking precontoured plate 6-10 holewith locking screws set, proximal humerus locking plate (philos) set - 4-12 hole) plate with required locking screw set, distal humerus locking compression plate -medial &lateral(allsize with screw), lcp extraarticular distal humerus metaphyseal locking plate 4 to 12 hole (all size with screw), lcp radial head plate (all size with screw), locking olecrenon plate (all size with screw), hook plate olecranon plate (all sizes withscrews), distal radius locking plates (right / left) 4-8hole, distal radius t plate all sizes with screws, distal radius l plate all sizes with screws, distal radius locking plate variable angle 2.7mm and 2.4 mm system all sizes with screws, distal radius rim plate all sizes, mini plate and screws 1.5mm/ 2mm/ 2.7mm set for metacarpals and phalanges, dhs system with d.h.s.plate (round hole ) angle 125*, 130*, 135*, 140*, 145* short barrel 4-18 hole, long barrel 4- 18 hole, lag screw with compression screw 50-130 mmcortical screw (4.5 mm size 16mm-40mm), d.h.s.with trochanteric support plate with lagscrew comp.setall sizes (4-8 hole) & required cortical screws set, pfn with trochanteric support plate all sizes, proximal femur locking plate all sizes, femoral neck system (fns) all sizes, d.c.s.plate 95* 4 hole to 12 hole, angled blade plate - all sizes with screws, double angled blade plate with lag screwall sizes (4-10 holes) with required cortical screws set, pediatric d.h.s.all sizes with 3.5mm cortical screw set, distal femur locking plate (lateral) (dflcp) 6-18hole, proximal tibia locking plate (ptlcp) 6-15 hole, raft locking plate for proximal tibia setall sizes (5-8 hole) with locking screws, l buttress plate right/left all sizes with

CTN :38444708

24 Dec, 2024 NA

Datia - Madhya Pradesh

Tender For purchase of implants in govt medical college datia - d.h.s. plate long/short barrel (38/25 mm)with round, d. c., combi hole 1250, 1300, 1350, 1400 angle; 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 holes, d.h.s screw 22mm /16mm threading with compression screw (top-bolt). (36 mm) 50 to 115 mm, in 5mm increments, pediatric d.h.s. set, d.c.s plate (950) with round, d. c., combi holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 holes, angle blade plate (950) with round, d. c., combi holes, blade size 50, 55, 60, 65, 70 & 75 mm and 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 holes, trochanteric stabilisation plate to be used with dhs, distal femur locking compression plate (right & left) anatomical pre-shaped & contoured with self-tapping locking head screws; with round locking holes for metaphyseal portion of plate & combiholes for shaft of plate., medial & lateral proximal tibial buttress plate (t- & l- shape)- as per ao specifications. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal medial & lateral tibial plate 3.5 mm(right & left) anatomically pre shaped and low profile. two different plate design for left and right side with indication on side of plate. plate should have 2 mm holes for proximal fixation with k-wire and sutures for meniscal repair. holes should accept 3.5 mm locking head or 3.5 mm standard cortical screws from 4 to 20 holes with increment of 2 holes., proximal medial/ lateral tibial locking plate for 4.5 mm screws anatomically pre shaped and low profile design, two different plate design for left and right with indication on plate. round metaphyseal locking holes and combi holes in shaft portion for locking and standard screws. different angulation in proximal part of the plate to avoid primary and secondary loss of reduction. should be compatible for less invasive technique holes should accept 5 mm locking head or 6.5 mm standard cancellousl screws from 5 to 13 holes, hockey plate for tibia (right & left) 5, 7, 9, 11, 13, 15, 17 holes, contoured medial/ antero-lateral plate for lower end tibia 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, distal medial tibial locking plates 2.7/ 3.5 mm. anatomically pre-shaped and low profile and specific for right and left side with indication of side on plate, compatible with less invasive fixation. rounded edges screw heads should be received into distal section of plate to allow multiple locking head screw placement of 2.7/ 3.5 mm to provide adequate fixation of metaphyseal portion of tibia, and size 4 to 14 holes with increment of 2 holes., anterolateral distal tibial locking plate 3.5 mm. anatomically pre shaped and low profile and specific for right and left side with indication of side on plate. plate should have head holes to accept 3.5 mm locking head or standard cortical or 4 mm standard cancellous screw. head should be received into the plate. size from 5 to 21 holes with increment of 2 holes, cobra head plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, cobra head locking plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook locking plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal humerus locking plate (philos plate). anatomically pre-countoured plates, should have precisely fitting sleeves for precision placement ofscrews, should accept 3.5 mm locking head screws. the screws provided should be available from 26 to 60 mm length. the head of the plate should have holes for securing tuberosities to the plate with sutures. should have low profile of the screws heads to prevent tissue irritation 3, 4, 5, 6, 7, 8, 9, 10, 12 holes, (a) anatomically pre-countoured plates for distal medial humerus for anatomical fit with left & right version. should have precisely fitting sleeves for precision placement of screws. should accept self-tapping locking head screws. the shaft portions of the plate should have combi holes. should have low p

CTN :38326865

23 Dec, 2024 NA

Raipur - Chhattisgarh

Tender For supply of implant orthopedic item - 1 (dhs dynamic hip screw (screw, plate, lag screw) with round hole plate/ dynamic hole plate. with various angles. (2-5 holes) each 5 (dcs) dynamic compression system ( screw, plate, lag screw) with round hole plate/ dynamic hole plate. with various angles. ( 6-9 holes) each 7 femur interlocking nail (nail with 2 proximal screw and 2 distal screw) with different size an different length. each 8 tibia interlocking nail (nail with 2 proximal screw and 2 distal screw) with different size an different length. each 9 expert tibia nail all sizes with 3 proximal and 3 distal bolts each 10 humerus interlocking nail (nail with 2 proximal screw and 2 distal screw) with different size an different length. each 11 (dcp) dynamic compression plate 4.5mm narrow with screws (6-8 holes) each 12 (dcp) dynamic compression plate 4.5mm narrow with screws (9-12 holes or bigger) each 13 (dcp) dynamic compression plate 4.5mm broad with screws (6-8 holes) each 14 (dcp) dynamic compression plate 4.5mm broad with screws ( 9-12 holes or bigger) each 15 (dcp) dynamic compression plate 3.5mm small with screws (6-8 holes) each 16 (dcp) dynamic compression plate 3.5mm small with screws (9-12 holes) each 17 1/3rd tubular plate 3.5mm with screws (6-8 holes) each 18 1/3rd tubular plate 3.5mm with screws (9-12 holes or bigger) each 13 13 21 3.5mm reconstruction plate with screw (6 -8 holes) each 22 3.5mm reconstruction plate with screw ( 9-12 holes or bigger) each 23 locking 3.5mm reconstruction plate with screw (6 -8 holes) each 24 locking 3.5mm reconstruction plate with screw ( 9 -12 holes or bigger) each 25 locking 4.5mm reconstruction plate with screw (6 -8 holes) each 26 locking 4.5mm reconstruction plate with screw (6 -8 holes) each 30 proximal tibial medial buttress plate (t plate) with screw (locking) (3 -5 holes) each 31 proximal tibial medial buttress plate (t plate) with screw ( locking) (6 -9 holes) each 32 proximal tibial medial buttress plate (t plate) with screw ( locking) (10 -12 holes or bigger) each 36 proximal tibial lateral buttress plate with screw ( locking) (3 -5 holes) each 37 proximal tibial lateral buttress plate with screw ( locking) (6-9 holes) each 38 proximal tibial lateral buttress plate with screw ( locking) (10 -12 holes or bigger) each 42 cobra plate with screw (locking) (3 -5 holes) each 43 cobra plate with screw (locking) (6 -9 holes) each 44 cobra plate with screw (locking) (10 -12 holes) each 48 distal tibial locking metaphyseal plate with screw (3 -5 holes) each 49 distal tibial locking metaphyseal plate with screw ( 6-9 holes) each 50 distal tibial locking metaphyseal plate with screw (10 -12 holes or bigger) each 57 proximal humerus locking plate (philos plate) with screw (3 -5 holes) each 70 distal radius locking plate (ellis, t buttress) with screws (1 -3 holes) each 71 distal radius locking plate (ellis, t buttress) with screws (4 -6 holes) each 73 radial head prosthesis silicon each 74 mini plate for metacarpal and carpal bone with screw (2 - 4 holes or bigger) each 77 square nail for radius (different length & size) each 78 square nail for ulna (different length & size) 79 titanium elastic nail (different length & size) each 80 proximal femur nail with two proximal locking bolt and two distal bolts (short 25mm) each 81 proximal femur nail with two proximal locking bolts and two distal bolts (long 36 -44mm) each 82 supracondylar femur nail dfn, all sizes, with two proximal and two distal bolts each 84 cannulated cancellous screw with washer (6.5mm) ss each 86 cannulated cancellous screw with washer (4mm) ss each 88 herbert screws all sizes ss each 89 herbert screws all sizes titanium each 90 non cannulated cancellous crew with washer (6.5mm) each 91 non cannulated cancellous screw with washer (4mm) each 94 jess external fixator ( with 4 shanz pin, with 2 clamp, with 1 jess rod) each 96 external fixator with 6 shanz/ steinmann pin/ dunheims pin, with 6 clamps, with 2 tubu

Butt Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector