Latest canopies Tenders | Government canopies Tenders

corporations/Associations/Others

CTN :40976637

11 Jul, 2025 NA

Surat - Gujarat

Tender For supply of all electrical material at new east (sarthana) zone light department for 1 (one) year or upto limit of rs.5,00,000.00 (in word rupees five lac only)-, , tube light and lamp , 4 ft. 18/20 watt led complete pvc t5 tube light lumen output 2000/2100, luminary efficiency 100lm/watt , 2 ft. 08/10 watt t5 led complete pvc tube light lumen output 800/1000, , 4 ft. 18/20 watt led complete aluminum body ts tube light lumen output 2000/2100, luminary efficiency 100lm/watt , 2 ft.08/10 watt ts led complete aluminum body tube light lumen output 800/1000, , 40w tungsten filament lamp , 60w tungsten filament lamp , 100w tungsten filament lamp , 9 w led lamp , 12 w led lamp , 20 w led lamp , light & accessories , 2.0 x 2.0 feet square 36/40 (watt) led fixture for indoor lighting or its equivalent , philips driver for 2 * 2 feet square 36/40 (watt) led fixture for indoor lighting or its equivalent, pin: 50w mac, u in: 240 vac, i in 0.22 a max, p.f. 20.95, i out: 280ma, v: u out -190 v dc max, self declaration conforming to is 15885(part 2/sec:13) , driver for 2 * 2 feet square 36/40 (watt) led fixture for indoor lighting or its equivalent, sidl-36-600, pin: 36w mac, v in: 230 vac 50hz, i in 160ma, p.f. > 0.9, athd: <10%, i out: 600ma, v: u out -54 v max, is 15885(part 2/sec:13) , 18/20 watt, led panel light (square/round), 1700 lumens , 20/24 led panel light size 12 x 12 inch , 12/15w led panel light (square/ round), 1020 lumens , 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k , 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to 5700k , , supply of 1200 mm sweep (48"), bee 5 star rated, ceiling fan with brush less direct current (bldc)permanent territe magnet motor, class of insulation: b, rust free 3 nos. aluminum blades, 2 nos, canopies, shackle kit with earthing provision, 22 guage copper winding, power factor not < 0.9, service value (cmm/w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm , ceiling fan, (48"), 1200 mm, energy efficient, bee? 1 star rated, high speed air delivery, minimum 218 cmm input power maximum 53 w , pedestal fan a.c.230v. 50 cy/s. 400 mm sweep oscillating type and adjustable height complete with guard, regulator & standard lead fleixble wires and plug top. , single phase industrial pedestal fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 450 mm dia size and maximum speed 1440 rpm 0.80 a, 180 watt. , wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating, type and adjustable height complete with guard, regulator & standard lead flexible wires and plug top , wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating, type and adjustable height complete with guard regulator & standard lead flexible wires and plug top , single phase approved make industrial wall fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 600 mm dia size and maximum speed 1440 rpm 0.80 a,180 watt. , single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 300 mm dia size and maximum speed 1350 rpm , single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 225 mm dia size and maximum speed 1370 rpm , approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 150 mm with 1350 rpm , approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 200 mm with 1350 rpm , approved make low noise decorative exhaust fan having square frame abs body with inbuilt lowers & square frame, having 250 mm with 1310 rpm , capacitor 440 v ac, 1.5 uf , capacitor 440 v ac,2.5 uf (oiled filled) , capacitor 440 v ac, 10 uf , capacitor 440 v ac,25 uf , capacitor 440 v ac,36 uf , capacitor 440 v ac,45 uf , capa

Central Government / Public Sector

CTN :41001159

28 Jul, 2025 NA

Multi City - Multi State

Tender For electric trolley (specification:-1)wheels -mild steel wheels, 4 pcs, 320mm-370mm with collar, 2) axle-38mm diameter,n ms & ss mode. 3) bearings & ucp - 6 pcs with insulated wooden & fi ber bush, 4) transmission - customized automatic gear box. 5) brakes-customized drum braking system, 6 ) drive-electric motor minimum 1500 watt, with controller and converter, 7) battery - lithuium battery 48 v olt minimum 80ah (indigenous), 8)charger-25amt.(indigenous), 9)other electric - electric push button ho rn t90 2 pcs, led light 12 watt 4 pcs, brake displaying light, 10) base-frame:- stainless steel tubes, 1 1)seating:- 3 pcs, os ss chair in front row & 3-seater sofa (all seats made with foom and pu rexine), 12)pl atform:- 2mm aluminium chequered sheet, 13) shed:- canopy of ss pipe 25mm x 25mm with canvas roof cover, 14)flag:- support 2 pcs, ss pipe. make: the technicians or similar' (warranty period:up to 30 months from the date of supply). [ warranty period: 30 months after the date of delivery ]

CTN :40949375

14 Jul, 2025 1.65 Lacs

Kajora - West Bengal

Tender For establishment of roof support with cross iron girders along the haulage roadway in sonachora r-viii (b) seam of madhabpur colliery.

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

CTN :40710715

29 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : package 20c design, engineering, supply,installation, testing, commissioning and comprehensive operation and maintenance of 3.0 mwp roof top solar pv project and associated support structure works on resco model for a period of 25 years.

CTN :40644881

02 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For corrigendum : providing of custom bid for services - painting of onshore bunker conveyor structures junction tower structures bunker des utility pipelines hoist structures sprinkler pipelines at stockyard settling pond area conveyor canopies in coal handling system at ntpl

State Government

CTN :40878491

05 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : material purchasign for construction of one room zp psb and providing basic amanities at village kanhori tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing and laying cast in situ/ready mix cement concrete m-20 of trap /granite/quartzite/ gneiss metal for r.c.c.beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.complete, providing and fixing in position tmt-reinforcement of various diameters for t-fe-500 bar r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm lo 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

corporations/Associations/Others

CTN :40883430

14 Jul, 2025 NA

Metturdam - Tamil Nadu

Tender For mtps-i es em-ii sdiii cleaning of the main busbars, vertical bus droppers,lt modules lt breaker and its panels of lt switchgear at ahph,esp of unit-iii and cleaning of hvr transformer, support insulators and rapping motors at esp -iii roof top for t

CTN :40886381

19 Jul, 2025 NA

Pathankot - Punjab

Tender For supply of indoor unarmed combat training nursery - excavation of ground for brick work in foundation and columns , brick work with 1 ratio 6 mix material with sub class bricks , pillar column of 4 inch ms square pipe 3 point 2 mm to 4mm wall thickness with base plate on both side , ms pipe support for side covering with 2 inch multiple 1 inch pipe , plaster on walls with 1 ratio 6 mix material inside and outside , rcc work in pillar grounting with 1 ratio 1 comma 5 ratio 3 , steel bars in column and beam , pcc work in floor including with thickness of 100mm including uac pit of 10m multiple 10m , filling of sand in uac , aluminum windows and doors including all accessories , steel work in trusses and purlins and rafters etc , roofing with color coated aluminum galvanized sheet , side covering with color coated profile sheet in horizontal position , electrification work including fans and tube lights and exhaust , installation of industrial exhaust excel fans at top of the roof with all fitments , installation of 1 point 2mm thick pvc flooring at floor

CTN :40886469

19 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores and construction material of wss 12kl storage tank - cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse , hard core of broken stone aggregate of size 45 to 63 mm , crushed stone aggregate 20 mm graded , pre cast acc blocks type c1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 mtr , 5mm thick ms sheet , angle iron 65 x 65 x 6 mm , frp tanks 2 x 6000 ltrs capacity for each asset rotational moulded frp underground water storage tank , columns square hollow steel shs sections of size 80mm x 80mm x 4mm and 2800 mm long , trusses including gable end trusses shall be provided using rectangular hollow sections rhs of size 50mm x 25mm x 4mm and 2400mm long , purlins rectangular hollow steel rhs section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses , side bracings 03 nos of side bracing shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 3400 mm long as a horizontal support , roof sheet 0 point 60 mm thick pre painted galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed , ms sheet of 5 mm thick to cover surface of tank and making 1m x 1m opening cover of ug frp water tank , angle iron of size 65 x 65 x 6mm for making a frame for fixing of ms cover on the ug tank and opening of ug frp water tank and horizontal beam support to ms plate , ms handle of size 450 long and 50 mm thick 4 nos per cover welded with the ms sheet for opening of tank cover , ms hinges should be provided and fixed with ms sheet and angle iron frame , mlc pipe multi layer composite pipes triple layer pe al pe shall have an inner dia 25 to 32 mm in 100m roll with equal union , supply of hdpe water tank 500 ltr triple layer , self tapping screw 4 inch , self tapping screw 3 inch , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , water level pipe 4mm and 15 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel cutter circular saw , cutting blade 4 feet steel , cutting blade 14 feet steel , hexa blade 350 mm long isi 1st quality , axes picks 03 kg head with handle , welding rod , welding goggles , welding gloves

Canopies Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

State Government

corporations/Associations/Others