Latest communication trainer Tenders | Government communication trainer Tenders

CTN :45404155

17 Jun, 2026 NA

Theni - Tamil Nadu

Tender For supply of communication trainer kits for electronics and communication engineering

CTN :45375038

15 Jun, 2026 1.49 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lab equipments for ece dept.microelectronics lab. - list of items:supply of lab equipments(for specification details refer notice inviting tender), function (signal) generator (detailed specification enclosed), digital ic trainer kit with breadboard (detailed specification enclosed), moving coil microphone (detailed specification enclosed), lvdt trainer kit (detailed specification enclosed), strain gauge trainer kit (detailed specification enclosed), temperature measurement kit (detailed specification enclosed), fiber optic communication trainer kit power supply (detailed specification enclosed)

CTN :45351358

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, ask modulation and demodulation kitspecifications: message signal1: 8-bit variable data,amplitude 5v. message signal 2: debounced data, amplitude low (0) and high (5 v). message signal 3: fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fiber optic communication trainer kitspecifications:power supply: 230 v ac 10%, 50 hz mains operation. built-in regulated power supply. optical transmitters: led transmitter: 660 nm. optical receivers: phototransistor / pin photodiode receiver. built-in signal conditioning and amplifier circuits. audio power amplifier with speaker/headphone output. comparator / pulse shaping circuit for digital signal recovery. test points for cro observation and signal monitoring. fiber media: multimode plastic optical fiber (pof). fiber patch cords with connectors. signal sources: built-in sine wave generator. built-in square wave / digital pulse generator. voice signal input through built-in microphone/audio source. trainer features: separate transmitter and receiver sections. on-board test points for signal observation. led indicators for signal monitoring. fault simulation facility. compact tabletop modular design. circuit diagram printed on pcb. bandwidth: analog bandwidth: up to 350 khz. digital bandwidth: up to 2.5 mhz. controls: variable signal amplitude control. variable frequency control. optical intensity adjustment. standard accessories: patch cords and connectors. power cord. audio connecting cable. user manual.

CTN :45332546

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of eprom mpu24/mem5-02 programmed , panel rcs-fpp/04 , corrosion inhibitor rust ban 326 , snap ring 32x1.5 din 471 , computer accessories , plug-in board , screw m10x150 , gasket , pressure gauge 0-10 bar , temperature monitor , instrument , o ring 39.2x3 , plug-in board , telephone cable , thermocouple , adjusting washer , soldering iron stand , woodruff key , o ring , actuator vlv , cylinder head with valve , paste ultra therm mtu , pressure hose , oil filter , o ring , molykote paste g-n plus , gasket liquid loctite 573 , clamp , terminal , plug in board cob9-01/a , pressure sensor , relay 24v / 4a , conversion kit f/series 4000 (5205304531) , illuminescent diode , signal lamp , mpc1-01 card f/computer a.741620/741634 , software , tool bag , module cob 8-01 , diskette , housing , temperature sensor pt100/110mm , plug-in board , male connector , speed sensor , plug-in board sab 1-03(5295308912) , coolant level sensor , flashing lamp red , plug-in board cib 3-02 , plug-in-board not adjusted , speed transmitter dm52 , pressure sensor 1600 bar/r , relay , terminal , pressure sensor , flashing light , blue , fuse fk2/6a , terminal(0055314981) , terminal strip_0045310081 , fuse 2a fk2 , pressure sensor , switch , terminal block , pressure sensor 6 bar(sw) , fuel filter primary(lcm) , plug , w/p repair kit , relay , printer , thermal actuator , plug in board dfc 2-01 , display unlabelled , connection interface for monitoring , cable for monitor system , switch , loctite nr 510 surface sealant , plug , union , bolt m20 1.50x103.0 lg 18 conrod , switch , plate guard g73 , switch , bushing , bushing , modular system , led , conn fuel rail rear , diode m.kuelkoerp , plug in board mpu 30-02 , track-ball , cable , plug-in board , cover , automatic cutout , multi led 5 5k blue , plug in board , male connector , control lever ros 2 03 , fuse , control lever , o-ring , plug - in board , nut , sealing ring , keyboard english , terminal , wiring harness to injector , mpc 1 01 card f computer , silcone rubber loctite 5970 , compensating washer , plug-in board , switch , washer , shaft wtr pmp hi temp clg circuit , guide ring , valve keeper wedge , plug-in board , plate , flow restrictor , plug-in-board , plug in board , filter element , adaptor , modular system , plug-in board rob1-01 a , inb 1 , trackball , plug-in board , plug in board aib2-03 , aib 1 , plug-in board , plug-in-board , roller tappet , con rod bearing size 0-0 , pressure sensor , plug-in board , sealing ring , plug in board , bellows , transition socket , sleeve rubber , grommet , ring sealing a12x15.5 , hex nut , straight connector , rocker shaft , techometer , computer hard disc 2.5 60gb not adjuste , screw , eprom mem5 mcupps cps adjusted , audiable alarm , adaptor 10 6 n 15007 , plug , pressure spring , o ring , benjo screw , washer , o ring , plug in board , plugin board , washer , grommet , o ring , plug , drain valve , plug-in-board not adjusted , piston ring , washer , o ring , rtv , cover , split pin , level monitor bediaplca , terminal strip , contact block , module mcs 5 pim3 , oil seal high temp cirt pump , panel , repair kit , starter , bearing bushing , seal ring , circlip , seal ring , ring asm , contam indicator , fuel filter , pressure sensor , plug-in board

Central Government / Public Sector

CTN :45010670

03 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullout trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with integrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet(l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic laminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside the cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 nos ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought out to interface boxes as one for power supply and another for the communication cables. these boxes shall bedesigned to accept connections from the control room circuits. 5) modular workstation material shall confirms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-12055) certification or latest if any. note:(1)firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (2) tenderer must submit technical leaflets/ details of the offered material like make & model no. along with their offer, otherwise such offers are liable for rejection. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45275299

29 May, 2026 2.65 Lacs

Delhi - Delhi

Tender For repair maintenance of of epabx and telephone wiring system installed in the main court building at district court complex, saket, new delhi 110017 (sh annual comprehensive maintenance of epabx system alcatel omni pcx enterprises).

Central Government / Public Sector

CTN :45255485

09 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :44926963

29 Apr, 2026 20.48 Lacs

Delhi - Delhi

Tender For corrigendum : annual maintenance contract of epabx wiring and 1plus1 telephone system and kts installed at vcs office em fm office and commissioner cum secretary office vikas sadan

CTN :44967376

30 Apr, 2026 39.48 Lacs

Hyderabad - Telangana

Tender For construction of office block basement plus gf plus storey with one more floor provision at later date on epc mode i basis including internal and external water supply sewerage system and sanitary installations over head water tanks on terrace for drinking and fire fighting underground sump horticulture works internal electrical and mechanical installations external electrical service connections power wiring telephone condut lifts lighting conductor system fire fighting system with wet riser and sprinkler system automatic fire alarm system supply, installation, testing and commissioning of hvac chiller plant lan system ip based epabx system solar photo voltaic power generation system ups system access control system and illuminated signage etc complete at idbi training college gachibowli hyderabad sh providing services of computer operators and office attenders in office of executive engineer hyd iii and sub division iii bye 3.

Central Government / Public Sector

CTN :44980252

15 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullout trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with integrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet(l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic laminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside the cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 nos ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought out to interface boxes as one for power supply and another for the communication cables. these boxes shall bedesigned to accept connections from the control room circuits. 5) modular workstation material shall confirms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-12055) certification or latest if any. note:(1)firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (2) tenderer must submit technical leaflets/ details of the offered material like make & model no. along with their offer, otherwise such offers are liable for rejection. [ warranty period: 30 months after the date of delivery ]

Communication Trainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government / Public Sector

State Government

Central Government / Public Sector