Latest digester cover Tenders | Government digester cover Tenders

CTN :39861490

07 Apr, 2025 5.95 Lacs

Ramgarh - Jharkhand

Tender For dismantling, fabrication and installation of steel structure for platform of lighting transformer at mines, epoxy painting (aluminium colour) with red oxide zinc chromate primer with nomenclature on lt n ht poles at rajrappa project

CTN :39857117

07 Apr, 2025 4.37 Lacs

Multi City - Karnataka

Tender For estimation for instalation of play equipments to champaknagar park at sakleshpura tmc limit - double ldpe slide , u swing 2 seater made up of gi b-class structure materials. the top beam is made up of 80 mm gi pipes housing 4 bearing sockets each containing two ball bearings. the structure i.e the legs is made up of 80 mm gi pipes. the swing comes with rubberized chains and seeds are made out of frp. the length of the equipment is 8. height of equipment is 7 ( after installation). shaped structure are to be scheduled hot dip galvanized steel with 80mm od. all pipes are isi grade. all welded joints are scalloped and sharp edges and burrs are removed. is powder coated with foundation extension. safe area is 14 x 7. the rates are to be inclusive of supply and installation at site , monkey bar : made up of gi b- class structure material, the main four pillars are 80 mm gi and bheem is 50 mm dia pipe, triangle are in ldpe, and equipment is 7 feet about ground level. all pipes are isi grade. shaped structural are to be schedule hot dip galvanized steel with 80 mm od. all welded joints are scalloped and sharp adjust and burrs are removed. the above equipment is powder coated with foundation extension.the rates are to be inclusive of supply and installation at site , four seater see saw made up of gi b-class structural materials. the main beam is made up of 80 mm od gi pipes. the structure i.e, the legs are made up of 42mm od pipes housing a heavy duty metal bush of pivot type mechanism. handles are made up of 15 mm od gi pipe. the seats are made out of ldpe cycle seat four numbers. height of the equipment is 18 inches (after installation). length of the main beam 9. the above equipment is powder coated with foundation extension safe area is 14 inches by 5 inches. the rates are to be inclusive of supply and installation at site , merry go round made up of gi b class structure materials. the centre shocked is made up of 100 mm gi pipe housing a set of ball bearing and taper roller bearing. cross pipes are 25 and 20 mm gi pipes. height of the equipment is 2.5 feet ( after installation) the platform is made up of anti skid sheet. spinning diameter of the equipment is 1.2 m. all pipes are isi grade. all welded joints are scalloped and sharp edges and burrs are removed. equipment is duly powder coated with foundation extension. safe area is 8x8. the rates are to be inclusive of supply installation at site

CTN :39640661

11 Apr, 2025 4.84 Lacs

Kolkata - West Bengal

Tender For corrigendum : maintenance and repair of delivery platform at temporary pump shed near natun rasta more alongwith laying fitting and fixing of pvc delivery pipe near sreebhavan temporary pump shed over lb of lul2k khal including oling greasing of sluice structure

Central Government/Public Sector

CTN :39849586

15 Apr, 2025 57.97 Lacs

Bhatgaon - Chhattisgarh

Tender For temporary extension of discharge platform with additional column support structure along with walkway of tb-1 belt conveyor without interfering the original structures of surface bunkers required for discharging transported coal at concrete floor new

Central Government/Public Sector

CTN :39836839

16 Apr, 2025 NA

Delhi - Delhi

Tender For painting of steel structure of platform's shelter 1 to 7, shed of coach care center & sick line, trip shed, lathe machine shed etc. and repair to pathway at east and west end of anand vihar railway terminal for crossing smoothly through battery operated car/wheel chair by divyangjan & sr. citizens from one platform to another platforms in the supply of sse/w/anvt under aden/ndls .

State Government

CTN :39814751

08 Apr, 2025 15.00 Lacs

Raichur - Karnataka

Tender For grouting to silo, strengthening of bag filter structure and column encasement of ash pipe rack, providing and fixing of walkway platform in ash slurry pump house

CTN :39814279

15 Apr, 2025 33.90 Lacs

Ahmedabad - Gujarat

Tender For construction of transformer stacking platform with gantry structure at division store yard, kalol

Central Government/Public Sector

CTN :39822931

14 Apr, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39788167

28 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For design, supply, and installation of retractable tip up jump seat for inspection official in wap7 locomotive cab mounted on driver desk center cabin space with easy deployment and retraction, with a se cure locking mechanism to ensure stability as per the following specification and sketch attached: 1) seat : height 500 mm x width 400 mm x depth 400 mm x thickness 90-100 mm, 2) back rest: height 600 mm x width 400 mm x thickness 80 mm, 3) support structure: made up of seat component and pipe 30 mm squ are and flats, 4) locking mechanism: manual lever type, 5) upholstery: dobby fabric black/dark brown, 6) r etractable base mechanism: manual push pull lift, 7) material specification: is 2062, 8) paint finish: powder coated black, 9) safety standards: as per norms. note:- the seat shall be ergonomically designed for comfo rt and safety, with a durable frame capable of withstanding the operational conditions within the locomotiv e. the seat shall be space-efficient, folding neatly when not in use, to maintain cab functionality. retractabl e base shall be suitably fixed on the driver cabin center on the surface level without any raise in platform h eight. it shall meet all safety standards and be compatible with the existing structure of the wap7 locomoti ve cab driver desk. the seat's material and finish shall be resistant to wear and tear, ensuring long-term rel iability and performance. make: vijayjyot or f. i. s. a. srl or volvo. [ warranty period: 30 months after th e date of delivery ]