Latest frp cover Tenders | Government frp cover Tenders

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

corporations/Associations/Others

CTN :45236853

25 May, 2026 2.65 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in leisure valley, sector 10 a, ward no. 2, chandigarh under mplads. ln/mp18047/2024-2025/116. - providing and fixing of chest press double complete in all respects having following specifications. size / dimensions length -1200 milimeter width- 700 milimeterheight 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometer warranty - 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars complete in all respects having following specifications.size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the vertical or standing pipes shall be 40 mm nb with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm nb with a thickness of 2.9 mm. the foundation pipe shall consist of a gi pipe anchored 500 mm deep and supported with a mild steel (ms) angle of 25 25 4 mm. the nominal bore of the foundation pipe shall be 40 mm nb with a thickness of 2.9 mm. the ms foundation plate shall have a minimum thickness of 12 mm. all nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. the open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (frp) caps having a minimum thickness of 2 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.colour:- paint finish- power coated, uv resistant paint coating thickness (min) 80 micrometer warranty - 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of three wheel shoulder builder/ arm wheel- outdoor gym equipment complete in all respects having following specifications. size / dimensions height of central pole from ground -1524 millimeter outside diameter of first wheel - 850 millimeter outside diameter of second wheel - 800 millimeter outside diameter of third wheel - 650 millimeter height of first wheel from ground - 1220 millimeter height of second wheel from ground - 1200 millimeter height of third wheel from ground - 1180 millimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure quality

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

Central Government/Public Sector

CTN :45154893

22 May, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of fip cover for alco engine made of frp material to rdso specification no.mp.1.14.02.01 rev.01 jan 2004 and modification sheet no. mp.mod.en %u2013 06.24.09 & dimensionally confirm to dlw part no.10051820, weight frp cover should be 3.8 to 4 kgs. [ warranty period: 30 months after the date of delivery ]

CTN :45114818

28 May, 2026 9.88 Lacs

Siang - Arunachal Pradesh

Tender For supply of renovation plumbing items d d - cpvc pipe 15 mm dia 6 mtr long , cpvc pipe 25 mm dia 6 mtr long , cpvc nipple 15 mm 2 inches 3 inches 4 inches 6 inches and 12 inches , cpvc nipple 25 mm 2 inches 3 inches 4 inches 6 inches and 12 inches , cpvc socket 15 mm dia , cpvc socket 25 mm dia , gate valve bras 15 mm , gate valve brass 25 mm , cpvc elbow 15 mm dia , cpvc elbow 25 mm dia , cpvc tee 15 mm dia , cpvc tee 25 mm dia , bib cock brass 15 mm , cpvc reducer 15x25 mm , pvc elbow 4 inches , pvc tee 4 inches , coupling wash basin ss , wall mixer with hand shower , angel cock 15 mm , bib cock long body 15 mm , thread tape , cpvc union 15 mm , cpvc union 25 mm , waste pipe for basin , pvc pipe 4 inches dia 6 mtr long , wc european type , flushing cistern , wash basin complete set , cp jali 100mm , geyser 20 ltr cap , cpvc elbow 20 mm , cpvc tee 20 mm , cpvc socket 20 mm , solvent paste for cpvc fittings , cpvc pipe 50mm , fabt 20 x 15 mm , febt tee reducer 20 x 15 mm , mabt tee reducer 20 x 15 mm , health faucet , cpvc gate valve 20 mm , cpvc tee reducer 20 x 15 mm , cpvc elbow 45o 20 mm , cpvc union 20 mm , cpvc end cap 20 mm , cpvc plug 15 mm , nahani trap 75 mm , pvc execentric reducer 110 x 75 mm , ss drain strainer 4 inch cp jali with hole for kitchen sink and bathroom , cpvc pipe 20 mm dia 3 mtr long , cpvc pipe clamp 20 mm dia , frp cover for drainage chamber 2 feet x 3 feet , connecting pipe for gyser , gyser 5 lit cap ) /bid number : gem/2026/b/7500924 * /dated: 07-05-2026 & & / bid document 1 / 44

Central Government/Public Sector

CTN :45049964

20 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of dmc compressed moulded raised bracket with frp cover for point machine as per drg. no. r-st-11882. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45037429

08 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of frp cover for rmpu of ac 2 tier coaches as for dy cee/kgp. drg. no. dy. cee/ws/kgp/ac/1817. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44768541

18 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of frp covers for conveyor belts

Central Government/Public Sector

CTN :44958163

29 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of frp cover to rcf drg. no. lg43202, alt.nil [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44857020

27 Apr, 2026 NA

Nagpur - Maharashtra

Tender For supply of frp cover for outside dust bin housing for lhb coaches as per drg. no c&w lgd sk.no.1128 [ warranty period: 30 months after the date of delivery ]

Frp Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors