Latest obsolete motor Tenders | Government obsolete motor Tenders

Central Government / Public Sector

CTN :39084489

10 Feb, 2025 NA

Cuddapah - Andhra Pradesh

Tender For supply and installation of additional equipment for in house stp augmentation-design, manufacture, testing at manufacturer's works, inspection by third party, supply and commissioning of equipment for in house stp augmentation at kadapa bp- part-a : design, detailed engineering, manufacture, testing at manufacturer's works, inspection by third party and supply and commisioning of following equipments & materials- 1 supply of six-cylinder hydro test unit of capacity 80 cyls/hr with water tank, tilting frame, piping systems for water and air, flp high and low pressure pumps and flameproof motors (monobloc type) filling adaptor with hose , hydrotest gun lowering arrangement, control valve, pneumatic cylinder with accessories, rov, pneumatic control panel, pressure gauges etc. 1 ea, 2 supply of cylinder painting booth, complete with booth fabricated out of 3mm thick ms sheet, blower with 7.5 hp flp electric motor for exhaust of paint fumes through gi ducting and the painting generated fumes to be screened through a water curtain with water pump, hvlp type spray gun, complete 1 ea, 3 supply of 3 cylinder pneumatic test unit for lpg cylinder including a water bath, lowering platform, air filling gun, fixing and centering arrangement, pressure switch, pressure gauges, valves, pneumatic cylinder with accessories, fittings etc. 1 ea, 4 supply of screw air compressor with min. of 13kg/cm2 operating pressure and capacity above 130cfm along with refrigeration type air drier with capacity 200cfm and 13kg/cm2 operating pressure, 1 m3 vertical air receiver with all standard accessories, pre and post filters 1 ea, 5 supply, installation, testing and commissioning of vacuum cleaner 1 ea, part-b : supply and laying of cables- 1 supply and laying of 4c * 2.5 sq.mm, 1.1kv, frls, copper, armoured cable 3000 ea, 2 supply and laying of 3.5c * 120 sq.mm, 1.1kv, frls, aluminum, armoured cable 400 ea-

corporations/Associations/Others

CTN :39111521

07 Feb, 2025 NA

Kochi - Kerala

Tender For auction sale of m s scrap,m s scrap radiator,m s nut and bolt scrap,bogy bolster,press board scrap,electrical panel board scrap (small),m s wire rope,electric motor ,vibrate motor and engine,diesel engine scrap,reduction gear box,electrical scrap,lamination scrap

Central Government/Public Sector

CTN :39054603

13 Feb, 2025 28.19 Lacs

Ranchi - Jharkhand

Tender For supply of 25mm corrugated gi flexible conduit , 25mm dia, isi marked pvc pipe , modular blanking plate , 16a, single pole 240 or 415 v, 10 ka, c curve, mcb , 20a, single pole 240 or 415 v, 10 ka, c curve, mcb , 32a, single pole 240 or 415 v, 10 ka, c curve, mcb , 40a, single pole 240 or 415 v, 10 ka, c curve, mcb , 20a, double pole 240 or 415 v, 10 ka, c curve, mcb , 25a, double pole 240 or 415 v, 10 ka, c curve, mcb , 32a, double pole 240 or 415 v, 10 ka, c curve, mcb , 40a, four pole 240 or 415 v, 10 ka, c curve, mcb , 63a, four pole 240 or 415 v, 10 ka, c curve, mcb , 32amps rating, 240 or 415v, 2 pole rccb, 30ma sensitivity , 100 amps,25ka,fpmccb with thermo magnetic release with ics 100 percent icu , 125 amps,25ka,fpmccb with thermo magnetic release with ics 100 percent icu , 160 amps,25ka,fpmccb with thermo magnetic release with ics 100 percent icu , pvc electrical insulation tape of size 1.80cm width x 6 to 6.5 mtrs length x 0.125 to 0.13 mm thickness , aluminium lugs ring type for 16 sqmm cable , aluminium lugs ring type for 25 sqmm cable , aluminium lugs ring type for 35 sqmm cable , aluminium lugs ring type for 50 sqmm cable , aluminium lugs ring type for 70 ssqmm cable , aluminium lugs ring type for 95 sqmm cable , aluminium lugs ring type for 120 sqmm cable , aluminium lugs ring type for 150 sqmm cable , aluminium lugs ring type for 185 sqmm cable , aluminium lugs ring type for 240 sqmm cable , aluminium inline connector or ferrules for 16 sqmm cable , aluminium inline connector or ferrules for 25 sqmm cable , aluminium inline connector or ferrules for 35 sqmm cable , aluminium inline connector or ferrules for 50 sqmm cable , aluminium inline connector or ferrules for 70 sqmm cable , aluminium inline connector or ferrules for 95 sqmm cable , aluminium inline connector or ferrules for 120 sqmm cable , aluminium inline connector or ferrules for 150 sqmm cable , aluminium inline connector or ferrules for 185 sqmm cable , aluminium inline connector or ferrules for 240 sqmm cable , 8 way, double door, single pole and neutral db , 04 way, double door surface or recess mounting, horizontal type db , 04 way, double door surface or recess mounting, vertical type db , led panel indication lamps,red , led panel indication lamps,yellow , led panel indication lamps,blue , led panel indication lamps,green , led panel indication lamps,amber , intelligent multi function digital meter , 3 phase digital ammeter , 3 phase digital voltmeter , led frequency meter , 4 inch lt panel air cooling fan of 18w , 6 inch lt panel air cooling fan of 38w , 5 star, 25 litres, 2000 watt electric storage water heater geyser , spring charge motor for 2500 amps l and t make, model un2 25s air circuit breaker , spring charge motor for 1250 amps l and t make, model un1 12s air circuit breaker , spring charge motor for 1000 amps l and t make, model un1 10s air circuit breaker , spring charge motor for 800 amps l and t make, model un1 08s air circuit breaker , 24 hours analog timer switch , indoor heat shrinkable cable jointing kit, 300 sqmm cable , uv coil for l and t make u power 4pole acb of rating 850a or 1000a or 1250a or 2500a , 9 or 10w b22 led lamp , led batten light of 20w , 2 feet x 2 feet recess mounted led flat panel light of 36 watts , 2 feet x 2 feet surface mounted led flat panel light of 36 watts , 1 feet x 1 feet surface mounted led flat panel light of 18 watts , surface mounted round led downlighter of 18 watts , led decorative post top luminaire of 40 watts , led street light fitting of 120 watts , led street light fitting of 150 watts , led flood light fitting of 150watts , led bulkhead luminaire bid details/ 2 / 74 of 10 watts , aviation obstruction led luminaire , flexible led strip light of 12v, min 48w , led power supply of 60w , led power supply of 120w , wall mounted oscillating type fan with 3 blade , oscillating type pedestal fan with 3 blade , oil filled radiator heator , bee 5 star rated 1200 mm sweep ceiling fan , 0.5 hp sel

CTN :38970849

04 Feb, 2025 NA

Bhopal - Madhya Pradesh

Tender For mpstdc invites offers for procurement of water sport and adventure equipment - all floating apparatus ( boats, rafts, buoys etc.) should be capable of 100% safe buoyancy, frp passenger boat 6-seater, with steering system (with obm) type i, frp passenger boat 6-seater, with steering system (with electric obm) type ii, 20 seater passenger(with obm), 20 seater passenger(with electric obm) and solar panel charging backup), jet ski yamaha ex.-1050 (3-pax), electric jet ski, water roller, banana ride (6-seater) double barrel without speed boat complete set, banana ride (6-seater) single barrel without speed boat complete set, paddle boat (catamaran type) frp (4- seater), family pedal boat(pe), electric pedal boat (car shaped)pe, water bike (1 persons), water bike (2 persons), water tricycle, sofa bumper for 3 people, water zorbing 4 people, flying fish towable, round pe boat with electric obm round pe boat, mini excursion boat (4 persons), family passenger boat with obm, floating jetty floating jetty (type 1), floating jetty (type 2), atv advance terrain vehicle ( atv baggi) 250 cc engine, life buoys (standard size) ring shaped 9.1 ce or any iacs member or irs certified., obm 40hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel tank. make : mercury with all necessary standard fittings/ accessories., obm 40hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel tank. make : yamaha with all necessary standard fittings/accessories., obm 40hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel tank. make : tohatsu with all necessary standard fittings/accessories., obm 25 hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel tank.make : mercury with all necessary standard fittings/ accessories., obm 25 hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel.make : yamaha with all necessary standard fittings/accessories., obm 25 hp (petrol operated) for speed boat/motor boat4s efi, elpt with remote control system and with trim control (power trim), fuel water separator fuel hose and fuel tank. make : yamaha with all necessary standard fittings/accessories., 30 + 3 crew seater passenger(frp)with obm, 40 + 3 crew seater passenger boat(frp)with obm, electric obm with steering mechanism and with battery pack: for the replacement of 40 hp petrol 4s obm for (i) speed boat capable of giving 8 to 10 knots speed with minimum one hour endurance in one charge, electric obm 9.9hp, electric obm - 20 hp, electric obm - 25 hp, electric out board motor 50kw, electric obm with battery set (warranty 8 year and all accessories such as rc, bms etc.) for mini cruise 20-seater capable of giving 6 to 8 knots with two hours endurance in one charge., poly ethylene (pe) speed boat (4 pax) 40 hp 4stroke remote, electric start mercury / tohatsu / yamaha obm, poly ethylene (pe) speed boat (4 pax) with 30hp 4stroke remote, electric start . mercury/ tohatsu/yamaha obm, imported inflatable raft, rafting helmet, raft air pump manual, rafting air pump electrical, rescue inflatable boat:, mini passanger cum excursion boat, speed passenger boat (8 persons), catamaran passenger boat with 50 hp obm, excursion cruise pontoon boat, 4 seater pe family pedal boat:, 5 seater pe family paddle boat, kashmir type shikara manually operated four persons with sofa and back rowing., kashmir type shikara manually operated six persons with sofa and back rowing., life jacket:, sofa bumper boat two-seater pvc/hypalon material colorful and modern design, transparan

CTN :39070078

14 Feb, 2025 NA

Jamnagar - Gujarat

Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes

CTN :38984079

03 Feb, 2025 10.00 Lacs

Dabra - Madhya Pradesh

Tender For purchase of various items in jal praday department - purchase of items specified below, 35 hp electric submersible motor, 35 hp starter panel dol ip 54, pipe 160mm hdep, band 150mm, cable 35mm 3.5 core, 10 06 4mm

CTN :39061564

30 Jan, 2025 NA

Nilgiris - Tamil Nadu

Tender For eee lab equipments - dual core dspic33ch pwm controller (nano 33ch) , read analog data and uart communication.a)dual core dspic33ch pwm controller (nano 33ch), dc motor drive systema)dual core dspic33ch pwm controller (nano 33ch)b)buck converter c)12 v dc motor each 1 no., dc to dc converter a)dual core dspic33ch pwm controller (nano 33ch)b)boost converter each 1 no, read adc and generate sine waveform a)dual core dspic33ch pwm controller (nano 33ch)b)potentiometer each 1 no, three phase induction motor drive system a)cipos intelligent power module (vid-04cipos)b)induction motor 3 phase 0.25 hpc)dual core dspic33ch pwm controller ( nano 33ch) each 1 no., scr commutation circuit kit, non-automatic and automatic iron box.(each 1), electric water heater (wall mounted), table fan, mixer grinder, digital multimeter, wire cutter, nose pliers (8 inches) , cutting pliers (8 inches), heavy duty screw driver (250mm), heavy duty tester ( 500 w ), wire stripper , drilling machine with drill bit a)power 500wb)drilling capacity 15mm (for wood)c)drilling capacity 10mm (for steel), spanner (6inches to 32 inches) each 1, 1.5sq.mm wire (90m), rheostat 400 /1a, 530 /1a, 1180 /1a, capacitor bank (2 kvar, 1000v), single phase variac (1 kva), lpf wattmeter 150/300/600v, 2.5/5a, upf wattmeter 75/150/300v, 5/10a, upf wattmeter 150/300/600v, 10/20a, dc shunt motor coupled 3 alternator (with synchronizing panel) specification:dc shunt motor 5hp/220v, 3 alternator 3kvasynchronizing panel consists:voltmeter 2 nos, ammeter 2 nos, frequency meter 2 nos, phase sequence indicator 1no, ac lamp holder with bulb - 6 nos, mcb (4 pole) 1 no, synchroscope 1no.

CTN :39054427

13 Feb, 2025 NA

Bokaro - Jharkhand

Tender For supply of electric motor siren with advance siren control panel set

CTN :38924592

03 Feb, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

Central Government And Public Sector

CTN :38934831

03 Feb, 2025 NA

Damanjodi - Odisha

Tender For supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor 24-32v/10amps-

Obsolete Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector