Latest plasma cutting machine Tenders | Government plasma cutting machine Tenders

Central Government / Public Sector

CTN :45372236

26 Jun, 2026 NA

Multi City - Multi State

Tender For supply of hc65i torch head or equivalent suitable for m/s techno crats air plasma cutting machine with the model of kalicut-25. ]

Central Government/Public Sector

CTN :45114820

05 Jun, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of refer to the attached specifications , item sr no - 25 - c clamp set only sutaibal for dvvnn 2525m16 - please refer to the attached specifications , item sr no - 26 - insert only sutaibal for tgfh 32-5 - please refer to the attached specifications , item sr no - 27 - parting blade only sutaibal for tkn5 insert - please refer to the attached specifications , item sr no - 28 - grooving tool insert - please refer to the attached specifications , item sr no - 29 - side tool holder sandvik - please refer to the attached specifications , item sr no - 30 - inserts - please refer to the attached specifications , item sr no - 31 - inserts - please refer to the attached specifications , item sr no - 32 - spare lever - please refer to the attached specifications , item sr no - 33 - screw - please refer to the attached specifications , item sr no - 34 - shim - please refer to the attached specifications , item sr no - 35 - inserts - please refer to the attached specifications , item sr no - 36 - parting tool blade - please refer to the attached specifications , item sr no - 37 - insert - please refer to the attached specifications , item sr no - 38 - parting tool blade iscar - please refer to the attached specifications , item sr no - 39 - inserts iscar - please refer to the attached specifications , item sr no - 40 - thearding holder external - please refer to the attached specifications , item sr no - 41 - thearding insert -external - please refer to the attached specifications , item sr no - 42 - thearding insert - external - please refer to the attached specifications , item sr no - 43 - thearding insert -internal - please refer to the attached specifications , item sr no - 44 - thearding insert -internal - please refer to the attached specifications , item sr no - 45 - tool holder - please refer to the attached specifications , item sr no - 46 - inserts - please refer to the attached specifications , item sr no - 47 - tool holder - please refer to the attached specifications , item sr no - 48 - spare screw - please refer to the attached specifications , item sr no - 49 - insert screw, 5513-020-01 indstl. std - please refer to the attached specifications , item sr no - 50 - shim - please refer to the attached specifications , item sr no - 51 - inserts - please refer to the attached specifications , item sr no - 52 - tool holder - please refer to the attached specifications , item sr no - 53 - inserts - please refer to the attached specifications , item sr no - 54 - tool holder - please refer to the attached specifications , item sr no - 55 - inserts - please refer to the attached specifications , item sr no - 56 - spare-lever - please refer to the attached specifications , item sr no - 57 - screw - please refer to the attached specifications , item sr no - 58 - shim - please refer to the attached specifications , item sr no - 59 - shoulder milling cutter -dia 125mm, 85mm - please refer to the attached specifications , item sr no - 60 - taps sets- inches - please refer to the attached specifications , item sr no - 61 - taps sets-inches - please refer to the attached specifications , item sr no - 62 - tap set metric - please refer to the attached specifications , item sr no - 63 - tap set metric - please refer to the attached specifications , item sr no - 64 - tap set metric - please refer to the attached specifications , item sr no - 65 - tap set metric - please refer to the attached specifications , item sr no - 66 - tap set metric - please refer to the attached specifications , item sr no - 67 - tap set metric - please refer to the attached specifications , item sr no - 68 - taper sank drill - please refer to the attached specifications , item sr no - 69 //bid details 2 / 74 - taper sank drill - please refer to the attached specifications , item sr no - 70 - taper sank drill - please refer to the attached specifications , item sr no - 71 - taper sank drill - please refer to the attached specifications , item s

Central Government/Public Sector

CTN :45336321

04 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of set of spares as per annexure-a. suitable for air plasma cutting machine, cap.-100 amp., model - cut-100 & gtpi-100 i. [ warranty period: 3 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337234

03 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of electrode 200 amps for hypertherm hpr260xd pro-arc cnc plasma cutting machine part no 220352 [ warranty period: 6 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45330793

24 Jun, 2026 NA

Duliajan - Assam

Tender For supply of portable plasma cutting machine

CTN :45057581

01 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45321993

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material part-2 > - flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- jk, flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- miranda, needle file set, make- jk, hss bolt tap set mm/bsf/bsw all sizes make- totem, hss tool bit all sizes, make- miranda, hss tapered shank drill/hss central drill/ hss die nut/hss bolt tap all sizes, make addidon, knurling tool, h.s.s end mill cutter, size- 10mm, h.s.s end mill cutter, size- 12mm, carbide insert turning holder left and right side v shape, size- 10 inch, carbide insert tool holder ( insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404 size-1/2 inch, carbide insert boring tool, holder size- 10 inch, stone cracker tool for roller tip cracker, carbide insert tool holder (insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404, size-1/2 inch, roller grooving tool with angular carbide tip 350angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller grooving tool with angular carbide tip 400angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller meshchart grooving tool with 8mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, roller meshchart grooving tool with 6mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, en-8 rod, size-32mm, length-6 mtr (m.t.c required), en-8 rod, size-38mm, length-6 mtr (m.t.c required), en-8 rod, size-45mm, length-6 mtr (m.t.c required), en-8 rod, size-50mm, length-6 mtr (m.t.c required), en-8 rod, size-60mm, length-6 mtr (m.t.c required), en-8 rod, size-65mm, length-6 mtr (m.t.c required), en-8 rod, size-70mm, length-6 mtr (m.t.c required), en-8 rod, size-80mm, length-6 mtr (m.t.c required), en-8 rod, size-100mm, length-6 mtr (m.t.c required), en-8 rod, size-120mm, length-6 mtr (m.t.c required), en-8 rod, size-125mm, length-6 mtr (m.t.c required), en-8 rod, size-150mm, length-6 mtr (m.t.c required), m.s round, size-12mm (per kg), m.s round- size 18mm (per kg), m.s round- size- 25mm (per kg), brass rod, od: 2 inch-6 inch, length- 3 mtr, (mtc required), en-45 flat (per kg) size- 10mm x 60 mm, m.s square bar (per kg) size- 10 mm x 10 mm, en-45 spring steel flat (per kg) size: 50 x 6mm, en-45 spring steel flat (per kg) size: 50 x 8mm, en-45, spring steel flat (per kg) size: 65 x 8 mm, en-45, spring steel flat (per kg) size: 75 x 8 mm, carbon flat 8 mm x 50mm, carbon flat 6 mm x 50mm, fencing wire netting width- 6 feet length-50 feet thk 3mm hole size- 2 inch x 2 inch, rubber tapper plug, size-42x45mm, union joint, size:1/4 , union joint m-30 (req for 30mm od tube), ferrule-30mm (req for 30mm od tube), rubber rope 3mm, rubber rope 5mm, scotch brite pad, g.i rivit: size- 8 x 25mm, kassi (good quality), belcha (good quality), shovel (good quality), suza, sutli (per kg), copper sheet, size: 1000 x1000x 3mm (28kg), m.s nipple both end threaded size- 1/2 x 9 , m.s nipple both end thread, size-3/4 x 12 c-class, m.s nipple both end threaded size- 1 x 8 , m.s nipple both end threaded size- 10mm x 8 , m.s nipple both end threaded size- 20mm x 8 , m.s nipple both end threaded size- 15mm x 8 , m.s nipple both end threaded size- 40mm x 8 , m.s nipple both end threaded size- 2 x 8 , m.s nipple both end threaded size- 2.1/2 x 8 , m.s nipple both end threaded size- 3 x 8 , pvc pipe 6mm (transparent) (per mtr), d-cycle, cap: 1 ton, heavy duty, make-usha martin, d-cycle, cap: 2 ton, heavy duty, make-usha martin, d-cycle, cap: 3 ton, heavy duty, make-usha martin, d-cycle, cap: 5 ton, heavy duty, make-usha martin, d-cycle, cap: 10 ton, heavy duty, make-usha martin, d-cycle, cap: 25 ton, heavy duty, make-usha martin, steel wire rope sling steel core size- 1 x 5 mtr x 9 eye size, steel wire rope sling steel core size- 3/8 x 5 mtr x 9 eye size, steel wire rope sling steel core, size- 32mm (6 core) x 6.6 mtr length x 28 soft eye with pressed sleeve, steel wire rope sling steel core, size- 32mm

CTN :45021547

02 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 25b34c007 (nsn3433-720557819) portable plasma cutting machine

CTN :44135348

27 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras corrigendum : supply of widax tool holder , iscar grooving and parting tool holder , insert ccmt , solid carbide end mill cutter , holder sir 0025 r 16

CTN :45076850

28 May, 2026 NA

Bareli - Madhya Pradesh

Tender For work for cleaning of tank, repairing and replacement of old fins of cutting bed of 02 nos. underwater plasma machine, 01 no. cnc pro annual rate contract oxy acetylene, 01 no. cnc pro annual rate contract oxy profile and 01 no. cnc pro annual rate contract air plasma cutting machine installed in bogie shop through open tender for two years.

Plasma Cutting Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector