Latest railway infrastructure Tenders | Government railway infrastructure Tenders

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

CTN :44721016

18 Apr, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :44721017

18 Apr, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

Central Government/Public Sector

CTN :44806459

04 May, 2026 NA

Hanumangarh - Rajasthan

Tender For earthwork in filling and cutting in formation, blanketing, trolley refuges, toe wall, brick pitchings, construction of minor bridges, rubs including extension, s&t structures, ballast supply, laying and linking of broad gauge main line including points and crossings, spreading of ballast, tamping of track, transportation of p-way materials and other ancillary works in connection with constrution of hanumangarh bypass line.

CTN :44757118

23 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur furnace , makin

CTN :44730690

23 Apr, 2026 5.55 Lacs

Ambala - Haryana

Tender For supply of medicine c c - barium sulphate suspension 200 percent w v , barium sulphate powder 92 percent w w , acyclovir opth oint 3 percent w v 175mg bott of 30 opticaps , cyclosporine eye drops 0 point 05 percent bott of 3ml , phenylephrine hcl 10 percent solution eye drops vial of 5ml , amphotericin b 0 point 5 percent eye drop bott of 5 ml , atropine sulphate oint 1 percent tube of 3gm , besifloxacin 0 point 6 percent w v eye drop 5ml , bimatoprost 0 point 03 percent plus timolol 0 point 5 percent eye drop 3ml , brinzolamide 1 percent with mannitol and drop trainer delivery sysytem eye drop 5ml , combined epidural spinal sets , moxifloxacin 0 point 5 percnet with dexamethasone 0 point 1 percent self preserved with drop tainer system eye drop 5ml , gatifloxacin hcl 0 point 3 percent plus dexamathasone 0 point 1 percent w v eye drop 10ml , olopatadine 0 point 2 percent with povidone iodine in white drop tainer with least concentration of bak 0 point 01 percent w v usfda approved eye drop 2 point 5ml , taflluprost 0 point 0015 percent w v 2 point 5ml , preservative free hyaluronic acid 0 point 1 percent w v eye deops 10ml with 3k aeroflow dispensing , preservative free moxifloxacin 0 point 5 percent eye drops r2 metric dose vial 5ml , preservative free nepafenac 0 point 1 percent w v eye drop r2 metric vial of 5ml , preservative free olopatadine 0 point 2 percent w v eye drop r2 metric dose vial 5ml , hydroxypropyl methycellulose hypermellose ups 3gm carbomer 9802 2mg sorbitol dequest 20605 sterile lubricant eye gel 10gm , eye drop moxifloxacin hydrochloride and dexamethasone phosohate ophthalmic solution with droptainer system with 1 point 0ml equivalent to moxifloxacin 5mg and dexamethasone 1mg in 1ml , gentamicin sulphate 0 point 3 percent w v gentamicin base with hydrocortisone acetate ip 1 percent w v eye and ear drops bott of 5ml , nasal spray xylometazoline 0 point 14mg 0 point 14ml preservative free , boric acid ear drops 3 percent w v bott of 10ml , hypertonic saline nasal spray 110ml 120ml , pethidine inj 50mg in 1ml amp , inj phenylepherine 10mg 1ml , apparatus anaesthitic face mask with air cushion transparent size 0 infant , apparatus anaesthetic facemask with air cushion transparent size 1 paediatric , apparatus anaesthetic face mask anitistatic with air cushion transparent size 2 medium , apparatus anaesthetic face mask antistatic with air cushion transparent size 3 adult with valve , apparatus anaesthetic face mask antistatic with air cushion transparent size 4 , arterial line leader cath size 20g , arterial line leader cath size 22g , operating pack containing sheet large 3 trolley cover 2 surgeon gown 4 , bandage t shaped , tube feeding smooth plastic infant 38cm long 5fr with red flexible connector for nasogastric feeding , oxidised regenerated cellulose size 2 x 3 box of 10 , draw sheet 1mtr 96cms gamma sterile , surgical gown disposable gamma sterile , disposable drape for laprotomy , transparent dressing , foley balloon catheter silicon size fr 6 , laryngoscope cells for , pre op adhesive drape 28cm 30cm , pre op adhesive drape 36cm 40cm //bid details 2 / 38

Central Government/Public Sector

CTN :44720111

09 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, undersling water tank, sand box, flat, trough sheet, coach cut up parts, ms tank, grill gate, rolling shutter, bench test, wheel with plate, bins, roller of shutter, regulator empty box, sliding doors, dolley,platform shelter, engine base rail of demu, collapsible gate, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam with composite brake blocks, gi sheets, pipe 8"(ductile)inside thin layer of concrete in full pipe&negligible quantity of rubber beeding, square &rectangular tubes & galvanised sheets, ms grill gate,grill window &stair case handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering, cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, s&t panels, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 5 & 6

CTN :44687055

09 Apr, 2026 25.00 Lacs

Sonitpur - Assam

Tender For supply of medium store shelter d d - head fitting hwith led lamp 10 watts rechargeable , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

Central Government/Public Sector

CTN :44699518

22 Apr, 2026 NA

Prayagraj - Uttar Pradesh

Tender For pre and post tamping track measurement survey using trimble gedo vorsys trolley system in section under aden/line/cnb & provision of water level indicator for rcc over head tanks (27 nos.) under aden/hq/ii/cnb.

Central Government/Public Sector

CTN :44670951

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Railway Infrastructure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector