Latest rcc pile foundation Tenders | Government rcc pile foundation Tenders

State Government

CTN :39127102

01 Feb, 2025 NA

Chandrapur - Maharashtra

Tender For procurement of foundation frame of jack shaft and motor adjustment assembly with stud for impact crusher no.1&2 at chp-c , cstps, chandrapur.

CTN :39135509

05 Feb, 2025 8.29 Lacs

Alappuzha - Kerala

Tender For the items included are ring bund bailing out water by using motor coolie etc dr packing cc 148 foundation and cc 1 1and half 3 mat foundation cc 1 1and half 3 abutments beam pillar and slab are included a gi ladder is also provided for safely opera

Central Government/Public Sector

CTN :39104702

01 Feb, 2025 NA

Porbandar - Gujarat

Tender For rectification of engineering defects as per rfp - defect rectification of various engineering defects as per rfp, e-647:leakage observed frequently from port gearbox lub oil cooler sea water outlet line due to deterioration. same to be renewed as per sample. (mat-cuni, l-1.5 mtr, dia-80 mm). inway job includes removal of defective line and fitment of new pipeline., e-655: abnormal vibration observed from fwd bilge & ballast pump view 02 in nos. foundation frame angles deteriorated. defective frame angles of foundation to be renewed as per sample and proved for satisfactory operation (mat:-ms, size-150x1.2x0.7 cm). in way jobs includes:- (i) removal of suction and discharge pipeline.(ii) removal of motor and pump from foundation.(iii) cutting of defective frame angles.(iv) welding of new foundation frame angles. (v) fitment of pump with motor and system lines post renewal of foundation frame angles.(vi) carrying out vibration analysis of pump., e-656: leakage and abnormal vibration observed from sea water motor driven pump of stbd gearbox. suspect mechanical seal and bearing worn out. defect to be rectified and pump to be proved for satisfactory operation. in way job includes:-(i) removal of suction and discharge pipeline.(ii) removal of pump from foundation.(iii) replacement of mechanical seal and bearings.(iv) fitment of pump and system lines post repair., e-657: the following equipment system valves are not holding due to defective valve spindle/seat. valves spindles to be renewed as per sample. valves to be overhauled and pressure tested up to test pressure. in way job includes removal and fitment of valves with associated system post repair. (mat:-brass).ser equipment size qty(a) da no. 2 & 4 sdnr (65 nb) 02 nos.(b) ro plant sdsl (25 nb) 01 no.(c) calorifier sdsl (40 nb) 01 no.

State Government

CTN :39079302

06 Feb, 2025 NA

Shillong - Meghalaya

Tender For (i) construction of 1 x 60.00 m span (effective) single lane bug bridge o rcc pile foundation as per drawings and technical specifications. (ii) construction of approach road and service road. (iii) construction of hume pipe culvert. (iv) construction of toe wall, retaining wall and breast wall. (v) strengthening of existing weak bug bridge.

CTN :39070078

14 Feb, 2025 NA

Jamnagar - Gujarat

Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes

Central Government/Public Sector

CTN :39039808

05 Feb, 2025 NA

Raigad - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; replacement of corroded conveyor structure gearbox motor all pulleys head tail snub take up pulley bend pulley foundation structure head pulley hood ski..

CTN :39003738

27 Jan, 2025 NA

Gajipur - Uttar Pradesh

Tender For supply and fixing of 12.5 mtr high mast pole of approved make with rising, system hot dip galvanized inside & outside, having pole sheet thickness 3 mm, top minimum 100 mm, bottom dia minimum 310 mm, base plaste 25 mm thick, suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminator & its control gear boxes 0.75 hp powr control motor, 3 point suspension system with steel wire rope, 6 mm dia, suitable drum winch including making suitable foundation as per manufacture drawing & site requirement along with foundation bolt, nuts, washers, anchor plate etc complete in all respect as per direction and satisfaction to the engineer in charge at p/c bareji, district-ghazipur

State Government

CTN :39014302

10 Feb, 2025 1.76 Crore

Malda - West Bengal

Tender For construction of control room building, equipment foundation, switchyard development, retaining wall, boundary wall, culvert, fencing wall, approach road and sinking of 1 no tube well (100mmx50mm) dia including submersible pump motor 1.5 hp at propose

CTN :38924592

03 Feb, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :39024199

29 Jan, 2025 NA

Rourkela - Odisha

Tender For supply of 1.8 kw submersible dewatering pump set along with suitable capacity starter. rati ng of ac motor: 1.8 kw, isi marked, 1 phase,230v,50hz. delivery pipe size : 50mm(or higher upto 65mm).t he head of the pump should be : 12mtr(or higher)and discharge 40m3/hr(or higher). impeller type: non clo g impeller to handle suspended soft solids, pump shaft-stainless steel, non-return valve housing, casing: ro bust in construction, self priming motor coupled pump. the pump shall be centrifugal type and capable for handling various types of dirty water and liquids, floodwater handling, handling chemicals, effluents, sewag e and suitable for dewatering foundation, trenches, basements ,pits etc. the pump set shall have mechanic al sealing and protected with over load protection. suitable capacity starter, delivery pipe adapters & clamp s and all accessories to be included. accepted make/brand: kirloskar, crompton or equivalent reputed mak e/brand. [ warranty period: 30 months after the date of delivery ]

Rcc Pile Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government