Latest rcc pile foundation Tenders | Government rcc pile foundation Tenders

State Government

CTN :39127102

01 Feb, 2025 NA

Chandrapur - Maharashtra

Tender For procurement of foundation frame of jack shaft and motor adjustment assembly with stud for impact crusher no.1&2 at chp-c , cstps, chandrapur.

Central Government/Public Sector

CTN :39104702

01 Feb, 2025 NA

Porbandar - Gujarat

Tender For rectification of engineering defects as per rfp - defect rectification of various engineering defects as per rfp, e-647:leakage observed frequently from port gearbox lub oil cooler sea water outlet line due to deterioration. same to be renewed as per sample. (mat-cuni, l-1.5 mtr, dia-80 mm). inway job includes removal of defective line and fitment of new pipeline., e-655: abnormal vibration observed from fwd bilge & ballast pump view 02 in nos. foundation frame angles deteriorated. defective frame angles of foundation to be renewed as per sample and proved for satisfactory operation (mat:-ms, size-150x1.2x0.7 cm). in way jobs includes:- (i) removal of suction and discharge pipeline.(ii) removal of motor and pump from foundation.(iii) cutting of defective frame angles.(iv) welding of new foundation frame angles. (v) fitment of pump with motor and system lines post renewal of foundation frame angles.(vi) carrying out vibration analysis of pump., e-656: leakage and abnormal vibration observed from sea water motor driven pump of stbd gearbox. suspect mechanical seal and bearing worn out. defect to be rectified and pump to be proved for satisfactory operation. in way job includes:-(i) removal of suction and discharge pipeline.(ii) removal of pump from foundation.(iii) replacement of mechanical seal and bearings.(iv) fitment of pump and system lines post repair., e-657: the following equipment system valves are not holding due to defective valve spindle/seat. valves spindles to be renewed as per sample. valves to be overhauled and pressure tested up to test pressure. in way job includes removal and fitment of valves with associated system post repair. (mat:-brass).ser equipment size qty(a) da no. 2 & 4 sdnr (65 nb) 02 nos.(b) ro plant sdsl (25 nb) 01 no.(c) calorifier sdsl (40 nb) 01 no.

State Government

CTN :39079302

06 Feb, 2025 NA

Shillong - Meghalaya

Tender For (i) construction of 1 x 60.00 m span (effective) single lane bug bridge o rcc pile foundation as per drawings and technical specifications. (ii) construction of approach road and service road. (iii) construction of hume pipe culvert. (iv) construction of toe wall, retaining wall and breast wall. (v) strengthening of existing weak bug bridge.

CTN :39070078

14 Feb, 2025 NA

Jamnagar - Gujarat

Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes

CTN :38942294

29 Jan, 2025 NA

Dewas - Madhya Pradesh

Tender For supply of open gym item at awas nagar and tulja vihar gardne in w.no.02 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b class gi pi

CTN :38970606

28 Jan, 2025 25.02 Lacs

Ganganagar - Rajasthan

Tender For supply and fixing of open gym at various places in sri ganganagar - surfing boardproviding and fixing of surfing board of size not less than 1000mm (length) x 600mm (width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. the main structure frame shall be made from g.1. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 0250 mm & 10mm thick. the footrests shall be made from high quality fiber reinforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder coating shall be done with pure polyester powder of ackzonoble berger/ nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including.), thai-chi spinner (2 wheel)providing and fixing of thi-chi spinner (2 wheel) of size not less thal 700mm (length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. the main structure frame shall be made from g.i pipe minimum of 80 bn "c" class welded with m.s. round base plate atleast 250mm & 10 mm thick. high tensile s.s. nut bolts shall be used for assembly. the powder casting shall be done with pure plyester powders from ackzonoble/berger/nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the m.s. hodfast in cement concrete to hold the whole structure, under the direction of engineer-in-charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including), leg pressproviding and fixing of leg press of size not less than 1840mm (length) x 360mm (width) x 1560mm. (height) to build up the muscles of thigh and enhence the strength of waist. the mian structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the sleeve frame minimum of 100 od and m.s. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame. the footrests shall be made from casted aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), double standing twisterproviding and fixing of double twister standing of size not less than 1500mm (length) x 600mm (width) x 1300mm. (height) to enhence flexibility of waist. the main structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the handle frame is minimum of 25nb shall be made from "c" class g.i. pipe. the twister plate to be fitted on the bottom frame shall be made up of m.s. roaund plate of minimum size 300mm and 10mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac paint with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), construction of foundation/inaugration pedstal in 23 cm thick brick masona

CTN :39065964

04 Feb, 2025 2.96 Lacs

Bokaro - Jharkhand

Tender For repairing of lhs and rhs track frame foundation of l and t 300ck shovel, exc-2901 of gvp ph-ii ocp

corporations/Associations/Others

CTN :37739623

31 Jan, 2025 2.95 Lacs

Anjar - Gujarat

Tender For corrigendum : construction of ucr masonry wall for revetment work of location no.110 of 66kv shivlakha-samkhiyali tap adhoi line and location no.118 of 66kv shivlakha-rapar line, h-frame foundation under samkhiyali tr division under tr circle anjar

CTN :39003738

27 Jan, 2025 NA

Gajipur - Uttar Pradesh

Tender For supply and fixing of 12.5 mtr high mast pole of approved make with rising, system hot dip galvanized inside & outside, having pole sheet thickness 3 mm, top minimum 100 mm, bottom dia minimum 310 mm, base plaste 25 mm thick, suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminator & its control gear boxes 0.75 hp powr control motor, 3 point suspension system with steel wire rope, 6 mm dia, suitable drum winch including making suitable foundation as per manufacture drawing & site requirement along with foundation bolt, nuts, washers, anchor plate etc complete in all respect as per direction and satisfaction to the engineer in charge at p/c bareji, district-ghazipur

CTN :38901719

30 Jan, 2025 8.55 Lacs

Thrissur - Kerala

Tender For purchase and installation of equipments for polakkulam park(gym equipments) - gym equipments, walker single- providing and fixing walker single- using, minimum 100 nb gi c-class pipe- for main frame,minimum 32 nb gi b-class pipe- for leg frame, minimum 25 nb gi b-class pipe for handle frame, nylon 66 injection moulded casingclamps, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" footrest, nylon 66 injection moulded bearing cap & pipe cap, fully doneby first coat of primer jotun brad 40-50 micron thickness and top coatof pure polyester powder with 70- 80 micron thickness powder coatincluding cost of concrete foundation , all materials, labour,etc allcomplete asper the instruction of engineer in-charge, rider- providing and fixing rider - using,minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi b-class pipe for seat frame, minimum 40 nb & 25 nb b class gi b-class pipe for handle frame, minimum 32nb & 25nb gi b-class pipewith two handles for leg rest, lldp rotomoulded seat with inbuilt bolts3/8" x 1.5" for foot rest & seat rest, nylon 66 injection mouldedbearing cap & pipe cap, fully done by first coat of primer jotun brad40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat including cost of concretefoundation , all materials, labour,etc all complete asper the instruction ofengineer in-charge, chest press cum shoulder press- providing and fixing chest presscum shoulder press - ffe007 (make fun play )using, minimum 100 nbgi c-class pipe for center frame, minimum 40 nb & 32 nb gi b-classpipe for main frame, minimum 32 nb & 25 nb gi b-class pipe forhandle frame, minimum 32 nb & 25 nb & 40 nb gi bclass pipe forconnecting pipe, lldp roto moulded seat with inbuilt bolts 3/8" x 1.5"for seat & back rest, nylon 66 injection moulded bearing cap & pipecap, fully done by first coat of primer jotun brad 40-50 micronthickness and top coat of pure polyester powder with 70- 80 micronthickness powder coat including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of engineer in-charge, ski trainer- providing and fixing ski trainer -using, minimum 100 nb g.i. c class pipes for main frame, minimum40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe forhandle, minimum 25 nb & 40 nb gi b-class pipe for connectingpipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for footrest, nylon 66 injection moulded bearing cap & pipe cap, fully doneby first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of engineer in-charge, one seating cum 2 standing twister- providing and fixing tai chi cum twister -using, minimum 100 nb gi c-class pipe for main frame, minimum 25 nb gi b-class pipe for handle frame, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for twister disc, minimum 25 nb & 20 nb gi b-class pipe for seatingframe, minimum 80 nb gi b-class pipe for seating frame stand,minimum 80 nb gi b-class pipe for twister stand, minimum 25 nb gi b-class pipe for twister handle frame, lldp plastic- twister disc,nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of engineer in-charge, pendulum- providing and fixing pendulum - using, minimum 100 nb gi c-class pipe for main frame, minimum 40nb gi b-class pipe for leg frame, minimum 25 nb & 32 nb gi b-classpipe for handle frame, lldp rotomoulded seat with inbuilt bolts 3/8"x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer jotun brad 40-50 m

Rcc Pile Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others