Latest square bars Tenders | Government square bars Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

Central Government/Public Sector

CTN :39588932

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of set of boxing on sole bar for automobile carrier coach with side entry. consists of (i) end bo xing on sole bar rh as per rdso drg. no. rdso/cg/drg/21009, item no. 13, qty. 02 nos./set. (ii) end boxi ng on sole bar lh as per rdso drg. no. rdso/cg/drg/21009, item no. 14, qty. 02 nos./set. (iii) middle bo xing on sole bar length 15000 mm as per rdso drg. no. rdso/cg/drg/21009, item no. 15, qty. 02 nos./s et. one set consist of three types of boxing, total qty. 6 nos. materials to be painted with red oxide zinc chromate. note:- middle boxing item no. 15 of drg. no. rdso/cg/drg/21009, to be suppled in pieces of le ngth 2500 mm (12 pieces per set) and without slots. [ warranty period: 30 months after the date of deliv ery ]

CTN :39762314

10 Apr, 2025 69.28 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of fd protn wk med gun - quick setting compound rapidite confirming to is specification. , natural sand , aggregate 40mm , aggregate 20mm , 63mm hard core stone aggregate , tmt bar for fd gun shed pedestal , tmt steel bars 12 mm dia bar including , tmt steel bars 16 mm dia bar including stirrups cutting , ms binding wire , ms frame work for fd gun shed coumn and roof ismbs and ms plate etc all as directed , b ismb g2 beam 300x140 mm 9.50m long , 04 nos steel column section 6.00m long 300x300x6.3 mm over rcc pedestal , 02 nos for each top of pedestal column , 01 nos ms plate 16 mm thick to be welded with ismb on top end of shs column for fixing with 04 nos of , ms plate 8 mm thick to be welded with ismb g1 and g2 in middle on both ends for fixing 20 nos , 4 nos column 8 nos ms nuts and bolts of length 600mm for fundation bolt fully thread suitable for 20 mm dia nuts including two numbers of washers , ms nuts and bolts of length 150mm long fully thread suitable for 12 mm dia nuts including two numbers of washers , steel roofing trough srt of size 1630 x 613 x 180mm made out of 2mm thick hot rolled carbon steel , ms frame work for roof trusses purlin rafter and ms isa 65x65x6mm truss 5.80kg rm plate etc all as directed make tata sail jsw , ismc 75mm 6.32 mtr long rafter 7.14kg rm , ismc 75mm 10.50 mtr long purlin 7.14kg rm , ms flat 40x5 mm thick for wind tie tata sail jsw 1.26kg rm long 10.50mtr , ms plate of size 8mm thick for welding of truss with member , ms angle of size 40x40x6 for cleat , 10 nos ms plate 10 mm thick size 300x300 base sole plate for truss , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers , ms clit for joint of steel structure angle 40x40x6mm 100 mm long welded with steel structure , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag , prepainted galvanised sheet 10 feet x3 feet x 0.50mm , galvanised j hooks with bitumen cup washer including nuts 8mm dia , supply for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces , pbs roll self finished tarfelt hessian base for water proofing grade 1 conforming to is 1322 1980 of size 20m x 0.90 m , painting brush 4 inch make amar lukky , integral water proofing compound confirm to , silicone gel sealant of 01 pack of 400 gms including applicator gun , 12mm thick plywood bwr of size 8 feet x 4 feet , hesco basket size 0.60x0.60x0.90mtr , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 25mm dia , drill bit 16mm dia , drill bit 10mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 feet , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , brick hammer 1 2 kgs , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob , hack saw blade

Central Government/Public Sector

CTN :39755745

01 Apr, 2025 NA

Kota - Rajasthan

Tender For supply of sole bar patch double flange for all type of wagons as per drawing no. w/fr - 387-k, alt-1

CTN :39717117

29 Apr, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of sole bar (crf) as per drg.no. rbl-le11009 alt.-'c' packing instruction: pi042 ver. 1.0. [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :39664593

17 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of sole bar (longitudinal) to j&t/mtn drg. no. misc sk-5021 alt. 1 material and s pecification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39568855

25 Mar, 2025 NA

Bikaner - Rajasthan

Tender For supply of sole bar boxnhl to drg. no. wd-09034-s-14 alt.13 item no.1. and specification as per drawi ng [ warranty period: 30 months after the date of delivery ]

CTN :39296665

15 Apr, 2025 NA

Halisahar - West Bengal

Tender For supply of set of items of 4 nos. for modification work to sole bar at middle door ways of 4 doors aside shell as per rdso's sk- 75080, item no. - 1 to 4, alt no. - nil. [ warranty period: 30 months af ter the date of delivery ]

Square Bars Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector