Styrene Tenders

Get complete information related to latest Styrene Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Styrene Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Styrene Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

CTN :39720952

29 Mar, 2025 15.00 Lacs

Kapasan - Rajasthan

Tender For corrigendum : work of road furniture as per requirement in municipal area kapasan. (annual contract) - providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 3 metre long and size 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., 60 cm equilateral triangle, 80 mm x 60 mm rectangular, 60 cm x 45 cm rectangular, providing and erecting direction and place identification retro-reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick framed to angle iron 40x40x5mm with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., providing and erecting direction and place identification retro- reflectorised sign as per irc :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting 2 mm thick framed to angle iron 40x40x5mm with area exceeding 0.9 sqm supported on two nos mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour., supplying and fixing glow studs of size 100 x 20 mm made of heavy duty body shall be moulded asa (acrylic styrene acrylortrite) of abs having electronically welded micro prismatic lens with abrasion resistant coating as approved by engineer- in-charge. the glow stud shall support a load of 13635 kg. tested in accordance with astm d4280. the slope of retro-reflective surface shall be 35+/ -5 degree to base. the panels on both sides with at least 12 cm of reflective areas up each side. the luminance intensity should be as per the specification and shall be tested as described in astm 1: 809 as recommended in bs : 873 part 4 : 1973 as per approved sample & manufactures by the engineer-in-charge., providing and fixing l type bollard 135cm height made out of 1.25mm thick m.s. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of 150x150x7mm thick plate and hold fast at bottom, whole body is painted in white stove enamel and red reflective 3 band, each of 7.5cm and one reflective sheet of 15cm dia provided to it complete in all respect including all material, labour, diversion., providing and fixing swiss type hazard marker made out of 2mm thick m.s. sheet size of box is 15x15cm with hold fast at bottom whole body is painted in white stoving enamel paint with white/ high intensity grade prismatic type sheeting on all four side complete in all respect including all material, labour, and diversion., solar raised pavement markerssupply & installation of solar raised pavement markers made of polycarbonate molded body with circular shape, solar powered, led self illumination in active m

Central Government/Public Sector

CTN :39594799

27 Mar, 2025 7.37 Lacs

Dharwad - Karnataka

Tender For procurement of gym equipment at hubballi airport fire station -supply, installation, testing and commissioning of (sitc)6- stationmulti gym with 4 stack including mandatory exercise provision oflat pull down, mid row, chest press, shoulder press, multi press, legcurl, leg extension, additional exercise leg press, pec fly/ rear belt ,leg raise, chin dip, material of frame: cold rolled mild steel, framefinishing: 2 layer electrostatic coating, frame thickness:3mm ,pipeshape: rectangular,cable:5 mm thick & nylon coated, adjustablepulley diameter:3 inch, adjustable pulleys type: "v" groovedfiberglass impregnated nylon pulleys with sealed bearing, bearings:precision-machined bearings, grip assemblies: narrow grip, thicknessof seat: 2 inches, cushioning type: foam padding, cushioningmaterial: foam, number of weight stacks to be supplied along withthe machine:2, weight of each stack (in kg): 90 kg, length:350 cm ,width: 250 cm, height:230 cm, machine weight with stacks (in kg):450 kg etc. complete as required in assembled condition includingtransportation up to aai site location , sitc of heavy duty commercial treadmill with max speed 25kmph, 4hp motor, maximum user weight 200 kg, incline range(degree): 20, display read out: time, speed, distance, incline,calories, pulse/heart rate, console/display type: tft touch screen,display size: (in inch) 18.5, keys on console: instant speed, incline key,program, minimum number of programs: 24, power drive electricity ,material for frame: mild steel, material for side foot rail: mild steel,material for roller: mild steel, material for console: abs (acrylonitrilebutadiene styrene), length of treadmill :80 inch, width oftreadmill:30 inch, height of treadmill: 58 inch, running length (ininch): 69 to 72, running width (in inch): 25 including training fortechnical staff and support services with the system, with essentialfeatures of heart rate monitor, calorie count feature, shockabsorption, provision to control/set speed, provision toincline/decline, wheels for easy transportation, with additionalfeatures of auto lubrication, reversible deck, recovery pattern,mp3connectivity, fan, bluetooth, usb, wi-fi, pulse sensor on hand rails,plane damping system, fitness test, emergency stopper with safetykey mechanism to ensures high degree of user's safety etc. completeas required in assembled condition including transportation up to aaisite location. , sitc of multi bench (incline, decline & flat) with bar holder, type ofbench: flat incline decline, machine length:162 cm ,machinewidth:60 cm, machine height:54 cm, machine weight :45 kg, materialof frame: colled rolled mild steel, frame finishing/coating:2-layerelectrostatic powder coating, pipe shape: oval, thickness:15 gauge,material of frame: colled rolled mild steel, framefinishing/coating:2-layer electrostatic powder coating, pipe shape:oval, seat and backrest material: foam padding, upholstery material:foam, seat and backrest thickness :2 inch, with provision of adjustableseat and back rest, 3 position seat pad adjustment, back padadjustment:30 degrees, with provision of abs rubber feet for floorprotection etc. complete as required in assembled condition includingtransportation up to aai site location , sitc of double bar with pulls ups with max user weight 150 kg,product weight:200 kg, weight stacks:91 kg, height:220 cm,width:136 cm, solid-steel weight plates, heavy-duty belt system,length:122 cm, plate capacity (per rod):10 kg etc. complete asrequired in assembled condition including transportation up to aaisite location , sitc of squat rack with material of frame: colled rolled mild steel,frame finishing/coating: 2-layer electrostatic powder coating, pipeshape: rectangular, thickness: 3 mm,machine length:178 cm, machine width:168 cm, machine height:180cm, machine weight (in kg) 150 kg etc. complete as required inassembled condition including transportation up to aai site location , sitc of abdominal bench with material of frame of abdominal b

Loading, Please wait...

Styrene Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector