Latest underground reservoir Tenders | Government underground reservoir Tenders

Central Government And Public Sector

CTN :44222637

18 Mar, 2026 NA

Diu - Daman And Diu

Tender For supply of professional cordless impact drill driver , 12v 15 fc heavy duty cordless drill , 18v 400 heavy duty cordless impact wrench kit, , cobalt steel classic drill and screwdriver bit set , heavy duty impact wrench , professional screwdriver kit , bench vice fixed base , arbor press hand operated , liquid penetration inspection kit , pipe bending machine hydraulic type , hydraulic trolley jack 3 ton , hydraulic bottle jack 3 ton , air impact wrench with standard accessories , car jet washer with standard accessories , chain pulley block , compression testing gauge suitable for diesel engine with standard accessories , dial indicator micrometer , feeler gauge 20 blades metric , fuel feed pump for diesel , multimeter , injector testing set hand tester , heavy duty flaring tool kit , piston ring expander and remover , heavy duty corded electric impact drill , spanner t flocks for screwing up and up screwing inaccessible , spark plug spanner 14mm x 18mm x size , screw extractor set hex head , telescope gauge , digital tachometer led , thermostat , torque wrench ratchet type professional , hydraulic testing set , valve spring lifter and compressor , vernier calliper , outside micrometer , safety helmet , 3 ton steel car jack stand set , mechanical jack 50 ton mechanical jack for trucks , hand gloves , trammel , dust extraction vacuum , phase sequence meter , wheatstone bridge , frequency meter , spanner set de , neon tester pencil bit type , steel measuring tape , rawal plug holder and bit set , wooden mallet , zigzag multi purpose machine , double needle machine compressor unit suitable for pressure: 8 bar, delivery: 50 lpm (or more), reservoir capacity: 24 liters (or more), 230v, 50 hz, with pressure regulator and water separator, hydraulic trainer kit, each consisting of the following ) /bid number: gem/2026/b/7281563 * /dated: 25-02-2026 & & / bid document1 / 45matching components and accessories: i. hydraulic power pack ii. pressure relief valve iii. drip tray, steel iv. pressure gauge v. four-way distributor vi. double acting hydraulic cylinder vii. suitable weight viii. mounting kit for weight ix. 3/2-way directional control valve x. 4/2-way directional control valve xi. 4/3-way directional control valve xii. nonreturn valve. xiii. pilot-operated check valve xiv. one-way flow control valve xv. t-connector with self-sealing coupling nipples (2 nos. ) and quick coupling socket (1 no. ). xvi. profile plate,, hydraulic workstation with 40 square mm aluminum profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) worktable size (approx. ) l1200mm x w900mm x h900 mm, with four castor wheels including two lockable wheels at the front side, (2) drawer size (approx. ) l460mm x w495mm x h158mm each, and overall size of drawer unit (approx. ) l470mm x w495mm x h825m m and (3) drawer slide height (approx. ) 85mm. , professional cordless impact drill driver professional cordless impact drill driver, 12 v, 10 mm chuck, 2 x gba 12 v 2. 0ah battery, 1 x gal 12v-20 charger, 12v-15 fc heavy duty cordless drill 12v-15 fc heavy duty cordless drill, 19 mm, 1/4" tool holder, flexi click system, 0. 6 kg, + 2 x battery gba 12v 2. 0ah, quick charger gal 12v-40 profession, 18v-400 heavy duty cordless impact wrench kit, 18v-400 heavy duty cordless impact wrench kit, m20, brushless motor, 1050 nm, 3700 bpm, 1/2'', 2. 9 kg, auto bolt release (abr) + 2 x battery gba 18v, cobalt steel classic drill and screwdriver bit set cobalt steel classic drill and screwdriver bit set (blue, 34pieces), straight, heavy-duty impact wrench elephant 1/2 inch heavy-duty impact wrench | for cars | colour assorted | iw-02, professional screwdriver kit professional screwdriver kit | 9-piece screwdriver bit set| 2. 0ah battery | speed 360 rpm | torque 5/2 nm | push start and smart stop | " hex universal bit holder, " bench vice fixed base 150 mm material cast

CTN :44201265

28 Mar, 2026 4.59 Lacs

Kalyani - West Bengal

Tender For construction of underground reservoir at gandhi bhavan braiprd kalyani nadia

State Government

CTN :44217380

11 Mar, 2026 43.83 Lacs

Dantewada - Chhattisgarh

Tender For (5th call) construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 16 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber &providing, laying, jointing, interconnection of 90mm dia, 75 mm dia to 63 mm hdpe pe-100 , pn-6 pipe & . mm dia upvc class 6 kg/sqcm with suitable joints & 65 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss /nylon wirer opeand connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr ,construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 06 months under single village of piped water supply scheme under jal jeevan mission for village purantarai block dantewada, district dantewada ?????? ??? (p.h.e. sor (01.06.2020) ?????? 30-03-2021 ?? ???????? ???? ???? ????

State Government

CTN :44217383

11 Mar, 2026 30.97 Lacs

Dantewada - Chhattisgarh

Tender For (5th call) construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 16 mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber &providing, laying, jointing, interconnection of 90mm dia, 75 mm dia to 63 mm hdpe pe-100 , pn-6 pipe & . mm dia upvc class 6 kg/sqcm with suitable joints & 65 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss /nylon wirer opeand connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr ,construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 06 months under single village of piped water supply scheme under jal jeevan mission for village badegodre block dantewada, district dantewada ?????? ??? (p.h.e. sor (01.06.2020) ?????? 30-03-2021 ?? ???????? ???? ???? ????

State Government

CTN :44217365

17 Mar, 2026 48.45 Lacs

Balod - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt . including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber&providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia to 160 mm dia upvc class 6/10 kg/sqcm with suitable joints, . mm dia to . mm hdpe pe-100 , pn-6 pipe & .mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss/ nylonwirerope and connection cable including verification of tubewell yield& electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, construction of boundary wall around the over head tank, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr, providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with 03 month trial run and operation & maintanance for 09 months under single viiage scheme of piped water supply scheme under jal jeevan mission for village pandel , block-balod district balod. (risk & cost)

corporations/Associations/Others

CTN :44161654

26 Feb, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of reduction gear,belt ammunition m3,carrier air reservoir,bush steel adjustment of loose brl,power take off device,safety valve,ramp backsight,sear safety assy,handle cocking assy

Central Government / Public Sector

CTN :44122637

12 Mar, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of stainless steel reservoir

Central Government And Public Sector

CTN :44113098

27 Feb, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amalgamating various type consisting of melting scrap class mf/10, pl/8, pl/4, mp/3, b/9, b/14, cs/1, cs/2, hf/1, b/10, b/11, mp/6, j/4, db/1,p/4, mp/1, mp/4, sp/3 and st/2 (small qty. in mixed condition), mp/5, gi & ms nuts and bolts,iron chair and small parts,cbc component with or without rubber attachement,flap door,low grade steel parts of wagon bodies e.g. irs m-44 etc. twin pack draft gear f-325 g, gi rods,brake beam and air reservoir tank,brake cylinders, pipe, including upto 5 kgs cast iron with ms attachments. as available as in the lot. nb - cutting not allowed .

Central Government/Public Sector

CTN :44113234

26 Feb, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s stainless steel scraps such as pipes/ sheets, offcuts, hot boxes, bins,flasks,trough sheets ,ss air duct asssembly,ocb filter assesmbly,needle&syringe destroyer,bed side locker,ss clip assembly,flasks,food store container,reservoir tanks,hot pot,three seaters,dressing drums,ss rope,plates, buckets,cups,forks,food warmer,stainless steel bolts,hand rails,tea cans,water tanks,plates,storage container,rachet handles,filters,canvasses,jars, trays,jugs,kettles,plates, jugs,wall protectors, wash basins , clip assembly stainless steel,storage box,mixie jar, landing door ,vessels,owens,tanks,tumblers, strips, lavatory pan in lay,berth utility wire rods,filters of various types & sorts ,hot case,geysers,sterlisers,leggings,liquid receiver,commode adapter, stainless steel vessels including tea cans,bio toilet ball valves with/ without available attachments and all other stainless steel scrap nature items including magnetic steel items, trough sheets and the above lot is with ferrous attachments,steel/stainless steel pipes/light fittings /filters with/without ferrous fittings /attachments/magnetic steel attachments /adherings, in full/part/broken and in loose parts. note: 1) removal of ferrous/glass/rubber /thread mesh/ wood and other attachments etc are not permitted. 2) cutting is not permitted 3) if any extraneous material/material of aluminium in nature found in the lot, the same should be handed over to the custodian at the time of delivery.4)crane loading permitted. pl no 98090719

CTN :44004432

05 Mar, 2026 NA

Pune - Maharashtra

Tender For supply of knudsen effusion cell short 100 micro meter , knudsen effusion cell short 300 micro meter , 18 mm sample metal pan stainless steel , metal sample pan with handle stainless steel , solvent reservoir o ring for igc sea , standard column oven o ring kit , o ring 45.69 x 2.62 viton , balance hat o ring 164.5 x 3 mm fkm viton , o ring viton 15.60 id x 1.78 mm cs fkm viton 75 sha , o ring kf 16 centering viton fkm ss , o ring kf 25 centering viton , o ring kg 40 centering viton , hangdown wire for dvs 125 mm stage 2 130 mm stage 3 , hangdown wire for vpa 155 mm , ultra balance diamond loops dvs

Underground Reservoir Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors