Latest waste heat recovery machine scrap Tenders | Government waste heat recovery machine scrap Tenders

CTN :40672091

02 Jul, 2025 4.92 Lacs

Thumba - Kerala

Tender For leak rectification works with five layer elastomeric water proofing cum heat insulation treatment in f-02 /mme workshop at rff, vssc

CTN :40874095

28 Jul, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of ferritic steel sheet, size=3x1250mmx4000mm to grade x2crni12 (409m) table 1&2 as per dr g.no. rdso spec no.c-k201, heat treatment condition 2b as per table-5, packing instruction pi042, quality p lan - 97951. [ warranty period: 30 months after the date of delivery ]

CTN :40781463

21 Jul, 2025 NA

Kanchrapara - West Bengal

Tender For supply, installation and commissioning of electrical heat treatment furnace (stress relievin g) capacity-6 ton as per attached specification. [ warranty period: 30 months after the date of delivery ]

CTN :40862820

14 Jul, 2025 NA

Hyderabad - Telangana

Tender For vacuum heat treatment furnace (tav-h6-s) spares

Central Government And Public Sector

CTN :40873575

15 Jul, 2025 NA

Bangalore - Karnataka

Tender For bush holder (dia 33) for hammer tool of lfm as per rwf drg no. 704300110360. note: 1. wa rranty of 12 months from the date of supply or 06 months from the date of fitment whichever is earlier has to be provided against quality manufacturing defects and workmanship for the item supplied. 2. material co mpostion certificate, heat treatment process and mechanical properties certificate shall be produced from nabl accredited laboratories. [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :40873576

15 Jul, 2025 NA

Multi City - Multi State

Tender For 40t long shank pointed forged hook with nut and locking plate as per rwf drg no.711014413310 for 40/15t eot crane-4 in steel melt shop. the supply should include items 1 to 4 of drawing no.711014413310 note: 1) the tenderer should be a reputed maunufacturer of crane hooks or supplier of crane hooks for industries for a minimum capacity of 35t. pr oof of the same should accompany the offer. 2)tested certificate for material from repute d labs should accompany the supply. 3)heat treatment should be done and certificate alon g with heat treatment graph should accompany the supply. 4)hook should be tested for fre e from cracks and internal defects and ut certificate from reputed labs should accompany the supply. 5)the hook shall be manufactured and supplied as per is:15560-2005 in all other aspects. 6)hook to be tested for 80 tonnes proof load and tested certificate issued by gov erment approved competent person should accompany the supply. 7) sample test piece to a minimum size of 50mm in daimeter and 10mm thick should accompany the supply. 8) inspection certificate by m/s tpi agency. the tenderer shall provide all the required facilities to carry out inspection by m/s tpi agency. 9) warranty/guarantee certificate (for minimum period of 1 2 months from the date of fitment or 18 months from the date of supply.) should accompan y the supply. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40854371

07 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of armature (226) to drg. no. 35831130007-001, r05 (w/o heat treatment & annealing & plating) . (note: v , armature (225) to drg no. 45831030030-001, r01. (note: vendor code, material code & supply date only , armature stop (226) to drg. 35831130009-001, r03 (note: vendor code, material code & supply date only , armature (249) to drg. no. 35815330006-001, r06. (note: vendor code, material code & supply date only

Central Government/Public Sector

CTN :40854910

07 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - g-schedule for repair & maintenance work nvda head quarter building wing-b for fixing film for heat protection treatment for windows

Central Government/Public Sector

CTN :40867403

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel coil 1x1250mm., as per drawing: rdso spec. no. c-k201, grade x2c rni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: sta inless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coi ls. the coil shall be protected in reasonably good condition to withstand normal han dling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coi l should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil sho uld be wrapped with gi sheet. iv) side of the coil should be covered with card board sh eet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of s uitable thickness. vi) the inner edge of the coil should be protected by gi ring followe d by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) c oil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mou nted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickne ss 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 to nnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates s hall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be se prated with a layer of water proof paper, after this the whole bundle should be wrapp ed with double layer of water proof paper and a biodegradeable plastic sheet of suita ble thickness. a metal protection in edges should also be provided. ii) all bundles shal l have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every addi tional meter. the bundles shall also be provided with skid (wooden packing under neat h) to facilitate handling. mechanical damange & corrosion during transit if any shall b e at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Waste Heat Recovery Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector