Tender For supply of 42kv- 10ka rated metal oxide surge arrester normal voltage of 48 kv and maximum v oltage of 54 kv & mcov of 33 kv (rms) with solidly earthed neutral system confirming as metal oxid e element hermetically sealed in a porcelain container as per rdso spec no.elrs /spec/la/0008 with latest amendment or rdso spec. /e1/2/05- 87 with latest amendment . [ warranty period: 30 mont hs after the date of delivery ]
Tender For corrigendum : frp modular toilet (pre assembled) for lhb ac 2t, 3t & composite coaches. as per drawing: mdts-214 rev-12 with addendum as per lno. md46111 dated 16.04.2024 and corrigend um-1 as per lno. md46111 dated 18.04.2024. note-(1)supply of lavatory module for ac coache s should be done in 03 pieces (of walls) which can be fully assembled inside the coach.(2)hei ght of lavatory module must be 2070+10mm.it shall be minimized from top of the lavatory m odule only with reference to applicable lavatory module drawings. , packing instruction: mod ular toilet a wooden frame to be provided at the bottom of each modular toilet. wooden f rame should consist of four supports of size 100x100x150 mm length with strips size 40x100 mm of suitable length. modular toilet ould be suitably fastened with proper packing using item like biodegradable packing of adequate strength. the modular toilet to be covered wi th stitched cover of tarpaulin of good quality.a list should be pasted on each box showin g purchase order no. ,pl no. , description, drg no. /spec no. , qty, firm name & address & dat e of dispatch etc. for loose supply of items of frp modular toilet as per mdts 214 ( latest v ersion) , packing instruction (of latest version) willbe followed : for packing of inside/out side mirror : packing instruction no pi 134 should be followed for packing of attachment wall : packing instruction no pi 184 should be followed.for packing of ceiling flap mountin g , scrapper matting and soap dispenser with cage and other item if any : packing instructio n pi 042 should be followed. [ warranty period: 84 months after the date of delivery ]
Tender For corrigendum : supply of body building steel materials - 25 x 25x 3 mm m.s. angle, 32 x 32 x 3 mm m.s. angle, 35mm x 35mm x 6mm m.s angle, 50mm x 50mm x 6mm m.s.angle, 75x75x6mm ms angle (3x3x1/4), 100mm x 50mm x 6mm m.s channel, 25 x 3 mm m.s. flat, 25 x 6 mm m.s. flat, 32 x 6 mm m.s. flat, 40x6mm m.s.flat, 50x6mm m.s flat, 32x3mm ms flat(1 1/4x1/8), 60x40x2.5mm m.s.rectangle tube, 40x40x2.67mm sq.tube, 25x25x3 mm square tube, 76x38x19x2.5mm gi hat section, 60x40x2.95mm gi tubes, 40x40x2.95mm gi tubes, 25x25x2.95mm gi tubes, 3/4" erw steel tube, 1" erw steel tube, 1 1/4" erw steel tube, 10g m.s sheet
Tender For supply of door stopper for lavatory as per drawing no. t-6-3-740 alt - l or latest. required items 2, 4 and 5. [ warranty period: 30 months after the date of delivery ]
Tender For supply of stainless steel wash basin to rcf drg. no. mi004725 alt. "h", item no. 2, along with item no. 10 and 11. (note : mi004109 alt. nil is applicable for wash basin item no. 2). [ warranty period: 30 mont hs after the date of delivery ]
Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin