Ceramic Tiles And Articles Tenders

State Government

CTN :41843162

24 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of bathroom or toilet mirror (v2) (q4) , bathroom water shower (v2) (q3) , soap dish - case (q4) , floor drain traps (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , connection pipe with nuts (v2) (q3) , towel rail / ring for bathroom (q3)

Central Government/Public Sector

CTN :41845127

06 Oct, 2025 NA

Indore - Madhya Pradesh

Tender For supply of ss cloth hanger 6 in 1 , waste coupling reducer 40x32 mm , hex nipple ss coated 2 inch fta , hex nipple ss coated 2 inch mta , gi plug 15mm , cpvc tee 25 mm brass , cpvc elbow reducer 25x20 mm , cpvc fta 25 mm socket , cpvc mta 25 mm , cpvc brass fta 20 mm socket , upvc brass fta 20x20 mm socket , cpvc brass mta 25x25 mm socket , ms door handle with screw 300x16 mm , taflon tape hp 4 mtr x 12mm , cpvc fta 15x20 mm elbow , cpvc mta 15x20 mm socket , cpvc brass mta 15x20 mm socket , cpvc fta 15x25 mm socket , cpvc brass fta 15x25 mm socket , cpvc mta 15x25 mm socket , cpvc brass mta 15x25 mm socket , cpvc elbow brass 25x15 mm , cpvc elbow brass 20x15 mm , cpvc brass tee 20x15 mm , cpvc brass tee 25x15 mm , brass gate valve 15 mm , brass gate valve 20 mm , brass gate valve 25 mm , solvent 118 ml pack , pvc plug 15 mm , cpvc ball valve 20 mm , cpvc ball valve 25 mm , cpvc tank nipple 20 mm , cpvc tank nipple 25 mm , cpvc elbow 20 mm , cpvc elbow 25 mm , cpvc tee 20 mm , cpvc tee 25 mm , cpvc socket 20 mm , cpvc socket 25 mm , cpvc pipe 20 mm , cpvc pipe 25 mm , gi socket 15 mm , gi socket 25 mm , gi union 25 mm , gi reducer elbow 15x20 mm , gi reducer elbow 15x25 mm , gi reducer elbow 20x25 mm , 1st quality acrylic distemper , acrylic smooth exterior paint , synthetic enamel paint colour green or white or black 4 ltr pack , floor emulsion paint , aluminium paint , paint roller 8 inch , paint roller 6 inch , paint brush 5 inch , paint brush 4 inch , paint brush 2 inch , cement 50kg bag , sand paper 150 no. , scraping patta , water profing cement paint , s s 304 grade health faucet 1.25 mtr , s s 304 grade shower 4inch dia , western wc with seat cover , indian wc orissa patern , s s toilet paper holder , brass spindle and disk , s s 304 gradejet spray with hose pipe 1 mtr long , pvc connection pipe 60 cm long hot and cold , cp brass angle cock 15 mm , cp brass wall mixer , cp brass soap dish , ewc seat cover , ptmt float valve 15 mm , ptmt float valve 20 mm , ptmt float valve 25 mm , s. s. wire mesh 3 feet wide , ptmt bib cock of prayag or equivalent , iron cutter blade 4 inch , stainer 100 gm , aluminium door closer , cp brass bib cock 15 mm , cp brass pillar cock 15 mm , cp brass swan neck pillar cock 15 mm , pvc waste pipe , 2 in 1 cp brass angal cock 15 mm , 2 in 1 cp brass bib cock 15 mm , hexa blade 300 mm x 12.5 mm x 0.63 mm , pvc wall plug gitti 1.5 inch , 15 mm gi nipple 2inch , 15 mm gi nipple 3 inch , 15 mm gi nipple 4 inch , 15 mm gi nipple 6 inch , 20 mm gi nipple 2 inch , 20 mm gi nipple 3 inch , 20 mm gi nipple 4 inch , 20 mm gi nipple 6 inch

State Government

CTN :41864720

09 Oct, 2025 NA

Bulandshahr - Uttar Pradesh

Tender For work of laying interlocking tiles on the sides of 6.00 m, 7.50 m, 9.00 m, 12.00 m and 18.00 m wide roads in pahasu marg, scheme no.-2, khurja, district bulandshahr

State Government

CTN :41863390

29 Sep, 2025 NA

Haridwar - Uttarakhand

Tender For construction of internal roads by interlocking tiles of sanghipur village bahadarabad in constituency jwalapur distt. haridwar under state sector (job 2)

State Government

CTN :41863392

29 Sep, 2025 NA

Haridwar - Uttarakhand

Tender For construction of internal roads by interlocking tiles of mahadevpuram in constituency bhel ranipur distt. haridwar under state sector (job 1)

State Government

CTN :41891026

26 Sep, 2025 12.53 Lacs

Jammu - Jammu And Kashmir

Tender For providing and laying of 60mm thick paver block interlocking tiles near h/o s.s. sasan at digiana camp w.no. 58, jammu (under m.h-4059-district plan)

State Government

CTN :41867381

03 Oct, 2025 NA

Haridwar - Uttarakhand

Tender For construction of internal roads and drain by interlocking tiles in vill. bodahedi of constituency jwalapur distt. haridwar under state sector (job 2)

State Government

CTN :41867382

03 Oct, 2025 NA

Haridwar - Uttarakhand

Tender For construction of internal roads and drain by interlocking tiles in dadupur govindpur of constituency jwalapur distt. haridwar under state sector (job 1)

State Government

CTN :41856259

23 Sep, 2025 15.12 Lacs

Adampur - Punjab

Tender For repair of various works i.e. interlocking tiles, tile terracing, construction of boundary wall, repair, painting in judicial houses and judicial court complex at amloh

Central Government/Public Sector

CTN :41876067

27 Sep, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of fitment of nursing station with fitment of ss sink. , fabrication and installation of medical instrument storage rack of 6x3 feet with inbuilt multiutility drawers. , installation of isolated patient inspection bed with inbuilt iv stand alongwith suitable cooling mattress and three fold hospital partition screen in heat stroke room. , installation of ro water system in heat stroke room integrated with deep ss sink with hot and cold water tap for burn care of patients. , fabrication and installation of dressing table with rebuild drawers for medical utilities of nursing assistant. , fabrication and fitment of cushioned recliner cum seating arrangement with integrated iv fluid administration stand. , installation of sun protection film for temperature control and air purification cum cooling unit for heat stroke room as per scope of work. , installation of patient inspection bed table with iv drip stand alongwith fitment of portable three fold hospital curtain partition screen in emergency ward. , installation and fitment of extension slab working table with overhead wall cabinet for emergency kit in emergency crash ward. , installation and fitment of washing area integrated with deep ss sink with dual tab for hot and cold water dispensing unit and placing of suitable hospital receptacles. , provisioning of movable stretcher bed with inbuilt fulld infusion stand in crash emergency ward. , fabrication and installation of 04 in no. medicine storage rack shelves of 6x2x10 feet with inbuild drawers in dispensary room. , fabrication and fitment of rack and bin system for storage of day to day use medicine and storage of other medical utilities including overhead cabinets. , provisioning and installation of refrigeration unit for stowage of critical medicine and injections with temperature monitoring and controlling facility. , installation of indoor temperature cooling unit with integration of existing electrical infrastructure for preservation and prevention of damage to medicine in dispensary room. , fabrication and fitment of medicine distribution counter cum workstation of 11x1.5x6 feet with fitment of 8mm frosted glass partition for counter management. , fabrication and installation of 6x2x6 ms rack shelve for stowage of medical equipment store with lock and key arrangement. , fabrication and fitment of stowage facility for securing of backup oxygen cylinder including fabrication of shelve and overhead cabinets in store room for storage of hospital linens and necessities. , installation of exhaust system in dispensary room, store room, general ward detention room, crash and emergency ward. , provisioning and installation of sun protection films window blinds with rolling mechanism and fitment of various signage board and wall hangings as per scope of work in mi room building. fabrication and fitment of 2 way frosted glass door with teak wood frame 8x4 feet and fitment of temperature control unit with integration of existing electrial fitments., wall panelling 1110 square feet inside reception area, mo clinic/ inspection room, minor ot room with a grade rubber wood including integration of existing electrical infrastructure and utilities, cladding of area 1054 square feet with suitable high quality louvers / cladding material in various room as per scope of work., fabrication and installation of workstation with cushioned seating arrangement of 03 person as per size in scope of work, fabrication and fitment of rack/ shelve for reception area of size 6x6x1.5 feet including fitment of token generator, fabrication and fitment of aluminium partition 13x13 feet with installation of acp sheet material with integrated door in patient waiting area., installation fitment of 15 person multi cushioned //bid details 2 / 34

By Cities

By States

By Agencies

By Ownerships

By Sectors