Drilling Tenders

Central Government/Public Sector

CTN :45737033

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of solid carbide thro coolant double margin drill dia 5.8 x 50 fl x 150 oal x dia 6 shank [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45724976

20 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of hex head bolt m16xes high tensile as per drg no. 15:1364/part-1)-2002, ce-with property class-109 to 51367(part-33-2002, coating as per mots-057 item to be supplied by bdso, approved vendors only, supply, installation and commissioning of diesel hydraulic road moblie crane capacity 12 ton. as per technical specification attached., supply, installation and commissioning of hydraulic press machine, vertical c frame cap 200 tan. as per technical specification attached, supply and installation of one (01) porta cabin as per attached annesure 'a', to be used as a portable hut for rake test rig, complete with all structural, electrical, and furmibure provisions, ready for usa., hex head bolt m16x70 high tensile as per s: 1364 part-1-2002, ce-with property class 10.9 70 15:1367 part-3-2002, coating as per mots-057., hex head bolt m16x30 high tensile as per is 1364(part-1)-2002, ce with property class10 to is: 1367 (part-3)-2002, coating as per mots 057.

Central Government/Public Sector

CTN :45731391

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pneumatic 13mm drilling machine with free speed 840 rpm, length 265mm, weight 1.4 kg, stall torque 14 nm, power 1/2 hp (350 w), composite housing with thermoplastic rubber handle grip and wings on right & left sides for better operator comfort. make- chicago pneumatic, rod craft, fuji, atlas copco. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731354

07 Jul, 2026 NA

Avadi - Tamil Nadu

Tender For supply of electro pneumatic brake unit (drilled panel for regenerative type brake) used in emu/memu as per escorts part no: 2ep6547 or equivalent of ftrtipl part no: ft0051314-a10 rev -a02, kbi part no: ii106418, wsf part no: id 70231/4. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45347305

03 Jul, 2026 39.25 Lacs

Nilgiris - Tamil Nadu

Tender For corrigendum : provision of storm rain water drain with sotage tank collecting tank for rain water harvesting near pre primary school offrs farm qtrs station mess mt area of mh wellington and provision of bed head panel with oxygen pipe line for nicu and

Central Government / Public Sector

CTN :45731584

04 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of spares as per annexure1 suitable for drilling machine, make: bosch only. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45726678

27 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of s/c p/s drill (tialn coated) dia 9 mm, fl-60, oal 103 mm, shank dia 10 mm through coolent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45711088

03 Jul, 2026 NA

Parganas - West Bengal

Tender For spare parts for scania veh - ventilation glass v part no 206415, door glass part no 206957, door handle, outer v part no 227855, door handle, outer h part no 227856, lock v part no 1864792, control v part no 187721, control h part no 187722, ball part no 236177, side glass part no 256680, rear glass part no 256682, hydraulic pump part no 361453, wiper arm part no 1105172(255837), air nozzle part no 268387, air duct left part no 195669, air duct right part no 257104, fan motor(cab heater) part no 242395, closing plate lock part no 285093, window panes left part no 285070, adjusting angle connect part no 562579, nipple part no 562564, rubber protection part no 562608, nipple m8 part no 562617, pkv part no 562625, 28 spool control module part no 2530720477383(5626, selector valve part no 562631, hydraulic pipe part no 562648, switch part no 562656, motor part no 562464, extre man boom part no 562486, level indicator part no 562551, hydraulic pipe part no 562647, solenoid 24v part no 562520, rope guide roll rear part no 261389, bolt mc6s10 x 25 part no 809826, earth cable 430 mm part no 308080, safety valve part no 562626, solenoid valve part no 1115802(350127), junction box part no 583038, regulation arm / shock absorber part no 1104743

CTN :45566247

02 Jul, 2026 NA

Budgam - Jammu And Kashmir

Tender For corrigendum : tandom master cylinder assembly rakshak plus , air compressor assembly rakshak plus , fuel injector assembly rakshak plus , alternator assembly rakshak plus , universal joint assembly rakshak plus , bonnet hydraulic shocker rakshak plus , right side abs sensor rakshak plus , bevel pinion assembly with bearing rakshak plus , hub wheel bearing inner rakshak plus , hub wheel bearing outer rakshak plus , ball joint upper arm rakshak plus , ball joint lower arm rakshak plus , front hub nut rakshak plus , fuel filter rakshak plus , oil filter rakshak plus , ac filter rakshak plus , air filter rakshak plus , fuel pipe retain rakshak plus , hub oil seal rakshak plus , brake pipe rakshak plus

By Cities

By States

By Agencies

By Ownerships

By Sectors