Insulator Tenders

Central Government/Public Sector

CTN :45741797

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply of spares components to earth leakage detector of anuvidyuth make. the set consists: 1. meter module (main card, insulation tester and panel meter), 2. channel module (channel card fittedwith accessories), 3. main module for add-on units, 4. channel card, 5. mains cards, 6. cable cards, 7. mother board, 8. panel meters, 9. transformer xr-273-3, 10. transformer xr-243-n1, 11. transformer xr-355, 12. terminal strips channel/mains, 13. display card, 14. test leads redx2+green, 15. frc connector for meter reading, 16. relay 4 change over, 17. multi turn pot 20k (mt), 18. reset switch mpu-2, 19. dc buzzer, 20. rotary switch, 21. euro9 connector 32 pin, 22. euro connector 48 pin and 23. 1m potentio meter for main module. firms offer: make/model: anu vidyut [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45459904

06 Jul, 2026 NA

Kozhikode - Kerala

Tender For corrigendum : procurement of ht stay insulator for distribution north region-70000nos

State Government

CTN :45713543

06 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric material at gp kirmiti bharkas 26/27 tah.hingna dist. nagpur - electric items :, led bulb 18w philips/surya/cromptan, led bulb 30w philips/surya/cromptan, ledbulb 50w philips/surya/cromptan, 1/18 aluminium wire i.s.i. 1.0, 1/18 copper wire i.s.i. 1.5, 3/20 copper wire i.s.i. 2.5, 7/20 copper wire i.s.i. 2.5, led st. light fitting 24 w philips/surya/cromptan / bajaj, led st. light fitting 36 w philips/surya/cromptan / bajaj, led st. light fitting 50 w philips/surya/cromptan / bajaj, led st. light fitting 25 w astha/power, led st. light fitting 36 w astha/power, led st. light fitting 45 w astha/power, cable i.s.i. 2 core, cable i.s.i. 4 core, insulation tape i.s.i., main switch 16 amp single phase, main switch 32 amp single phase, main switch 32 amp three phase, main switch 64 amp three phase, led high must light ft. 100w philips/surya/cromptan / bajaj, led high must light ft. 150w philips/surya/cromptan / bajaj, led st. light braket, braket pipe 3/4, braket pipe 1/4, mcb box, alluminium cable (service wire) 2 core, alluminium cable (service wire) 3 core, kit kat 16 amp, kit kat 32 amp, kit kat 64 amp, fitting patti / pipe, electrical switch board 6 mm, electrical switch board 12 mm, led bulb 20w philips/surya/cromptan / bajaj, bulb holder, 2.5 mm service wire, led tube light 20w, mcb anchor / havells, elcb anchor / havells, celling fan

Central Government/Public Sector

CTN :45736158

09 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of insulation monitoring relay, 415v ac, 3 phase,neutralisolated, voltage range 0-500 v ac, insulation measuring range-10 k ohm to 150 k ohm, control voltage: 24 - 240 v ac/dc,asper page no: 39, s.no.63, item code: a2 and place of installation s1a7, of bill of material of rdso spec. no. rdso/pe/spec ac/0184-2015(rev.1), used for insulation control 415 v of lhb type ac coaches, confirming to rdso spec. no.rdso/pe/spec/ac-0184-2015 (rev.1), suitable for lhb type ac coaches switch board cabinet (s1a07). accepted make: abb:cm-iws.2s.or contrel make ir 470ly-21a, ri r138 orschneider make- vigil ohm/imd-im10 or siemens make- 3ug4581-1aw31 or dold make model no il5880 or woka make or bender make. supplier should provide oem authorization or dealership certificate or proof of purchase from oem or oem authorized vendor along with supply. supplier to ensure that the offered product is supplied with valid oem`s warranty certificate. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45716459

08 Jul, 2026 1.95 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of dry chemical powder , clip jubilee 3 and half to 4 1 by 8 , emery cloth abrasive cloth is grit 36 , cloth coated pvc 102 cm wide , paint roller 6 inch , paint brush 4 inch , paint brush 2 inch , gloves leather a , detergent solution , grease lg 280 , cleaner white toilet , paint roller 9 inch , ear plug , switch socket 3 pin 15a isi mark , rope polypropylene 16 mm isi mark , broom country , super mop , tape transparent 1 inch , sand paper isi mark , paint roller 7 , paper napkin , dvd , envelope cloth coated 12x16 inch , envelope cloth coated 10x14 inch , envelope cloth coated 9x12 inch , tape transparent 2 inch , tape insulating 25 mm , wonder tape 2 inch , wet surface putty , xerox paper 80 gsm 420 x 297 mm a3

Central Government/Public Sector

CTN :45739133

10 Jul, 2026 1.91 Lacs

Raigad - Maharashtra

Tender For supply of dust pan , dry chemical powder , cloth flanet 4 by 2 , cloth emery bs871 grade 1 , cloth bunting green , bleaching powder stablised , baygon spray , anti cockroach gel , jerry can 20 ltrs , pvc flexible water hose 1 inch , torch cell 1.5 v medium , coir mat green 36 wide , synthatic mat green , battery aa 1.5v , varnish , polythene film length 112 width 18 thk 0.007 , twine sewing , paint brush 3 inch , super mop with handle , tape measuring steel 15 mtrs , automatic air freshner , tray paint roller , cable electric 2 core copper 6a , rj 45 connetion , tape insulating 25 mm , super mop refills , polish metal brass , duster cloth , feather broom phool jhadu , cloth stocknite mutton cloth , cloth sponge , cleaner white toilet harpic , broom country , brush sweeping hand , geru red , rags cotton coloured , cleaning bar for utensils 500 gms , blue laundry , brush with long handle , scrubber with handle , abrasive cleaning pad scrabber pad , cotton waste * /bid number : gem/2026/b/7723747 + /dated: 30-06-2026 ' ' / bid document 1 / 32

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45726596

18 Jul, 2026 NA

Delhi - Delhi

Tender For repair/ maint of air conditioning systems alongwith its connected accessories at hq ids under ge new delhi - servicing of window type ac 1.5/2 ton capacity of any make / model by taking out the ac, cleaning of evaporating coil, condensing coil with water & brush to remove dust including cleaning of filter, greasing oiling of fan motor and checking of electric circuit for smooth functioning of ac complete all as specified and directed. note: the quoated rate includes the rates of minor parts i.e. starting relay, overload protector, thermostat, air filter synthetic/nylon as per existing size and shape, all as per item no 1.00 above but split type ac of any type and 1.5/2 ton capacity complete all as specified and directed, s&f in repairs running capacitor combination (50 mfd + 6 ) / (50+4) mfd 230 volt for ac upto 4.00 ton complete all as specified and directed, m&l for checking the leakage by feeding dry nitrogen to maintain adequate pressure in the system, plugging the leak and charging by charge refrigerant gas r-12/22/134a for water cooler, split type/window type ac/ deep freezer /refrigerator any size any capacity as on site complete all as specified and directed by engr-in-charge., m&l for replacement of reverse valve system suitable to 1.5/2 ton split/window ac for heating option (gas charging shall be paid and measured under respective item) complete all as specified and directed, supply & charging gas refrigerant r-22 /410 a/ or as existing to window type/split type/cassette/package type ac up to 4 ton capacity including removing of leakage if any and testing complete all as specified & directed by engineer-in-charge, m&l for repair of unserviceable pcb suitable for non inverter split type ac 1.5/2 tr and fixing the same complete all as specified and directed by engineer-in-charge., m&l for opening and taking down existing unserviceable pcb along with display unit and repairing & refixing of pcb along with display unit suitable for indoor unit of inverter ac of capacity1.5/2 ton split type ac complete all as specified and directed by engr-in-charge., m&l for opening and taking down existing unsv pcb and reparing & refixing of pcb suitable for outdoor unit of 1.5/2 ton split type ac inverter ac complete all as specified and directed by engr-in-charge., s&f pcb of non inverter type split type ac of capacity 1.5 to 2.0 ton and fixing the same in respective units including opening & taking down existing unsv pcb complete all as specified & directed by engineer-in-charge., s&f pcb of inverter type split type ac of capacity 1.5 to 2.0 ton and fixing the same in respective units including opening & taking down existing unsv pcb complete all as specified & directed by engineer-in-charge., s&f in replacement of of copper tubing and synthetic rubber tube insulation of thickness 9 mm & internal diameter - 6.0 mm (1/4") for refrigerant copper piping of split ac units complete all as specified and directed., s&f in replacement of of copper tubing and synthetic rubber tube insulation of thickness 9 mm & internal diameter - 13.0 mm (1/2") for refrigerant copper piping of split ac units complete all as specified and directed., s&f in replacement of of copper tubing and synthetic rubber tube insulation of thickness 9 mm & internal diameter - 9.0 mm (3/8") for refrigerant copper piping of split ac units complete all as specified and directed., s&f in replacement of of copper tubing and synthetic rubber tube insulation of thickness 9 mm & internal diameter - 16.0 mm (5/8") for refrigerant copper piping of split ac units complete all as specified and directed., s&f in repair drain pipe of any size suitable for split ac of capacity 1.5/2/3.5/4 tr as per sample complete all as specified and directed., supply only in replacement cordless remote for inverter type acs hot & cool suitable for 1.5 ton ac as per sample complete all as specif

Central Government/Public Sector

CTN :45741660

14 Jul, 2026 NA

Nabinagar - Bihar

Tender For providing of custom bid for services - 200153139 puncture insulator detection (pid) testing of 400kv & 132kv string insulators at nabinagar stps

By Cities

By States

By Agencies

By Ownerships

By Sectors