Insulator Tenders

Corporations/Associations/Others

CTN :45721980

06 Jul, 2026 10.00 Lacs

Pune - Maharashtra

Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and

Central Government/Public Sector

CTN :45732009

08 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For flexible insulating pvc sleeve with inner dia 25.8 mm + or -0.5 mm, minimumthickness 0.80mm, black colour. material conforming to is: 11654 para. iii sec-1 of 1988. supply in 50 mtrs rolls. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45408269

02 Jul, 2026 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of turbine thermal insulation & application service , piping thermal insulation

Central Government / Public Sector

CTN :45742493

20 Jul, 2026 NA

Nanded - Maharashtra

Tender For supply of live working gloves of insulating material (v2) isi marked to is 13774 (q2)

corporations/Associations/Others

CTN :45734363

11 Jul, 2026 2.49 Lacs

Kolkata - West Bengal

Tender For installation of insulating materials on the street light poles at different places in ward no 10 under br ii

corporations/Associations/Others

CTN :45734388

11 Jul, 2026 2.49 Lacs

Kolkata - West Bengal

Tender For installation of insulating materials on the street light poles at different places in ward no 11 under br-ii

corporations/Associations/Others

CTN :45734397

14 Jul, 2026 2.47 Lacs

Kolkata - West Bengal

Tender For safety precaution by installation of insulating materials on the existing street light poles at taramoni ghat rd,naskar para rd,banerjee para rd and other water logging areas in ward no-115 under br-xiii.

By Cities

By States

By Agencies

By Ownerships

By Sectors