Tender For hiring / installation of 20hp electric sewage pumping trolley with all allied accessories at service road of ring road near kirlokari village under jangpura constituency ac-41.
Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and
Tender For supply of battery operated 3/4 square drive 1600nm fastening brushless motor rail tightening machine(cordless impact wrench) with special extra long socket 41 mm, 32 mm & 28 mm with mobile connectivity feature with additional socket for plate screw removal and insertion, capable of customization through smartphone like tool remote locking, geo fencing, controlled speed/torque. with spare battery . make- bosch/makita/dewalt or similar. [ warranty period: 12 months after the date of delivery ] ]
Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)
Tender For corrigendum : providing of custom bid for services - comprehensive annual maintanance contract of underground pumping automation system at kandri mine
Tender For procurement of: consumables and spares of secondary fully automatic big bag packing machine - vertical jaw complete (heater, sensor, smc connector with pvc pipe) , horizontal rear jaw complete (heater, sensor, smc connector with pvc pipe) , horizontal front jaw complete (heater, sensor, smc connector with pvc pipe) , a0199833898c26c rear jaw for ldpe double band , a0199833908c26b front jaw for ldpe double band , akc0204003zz260 vertical jaw , a019983395eq03a rear c block for oi-5263 , a019983396eq03a front c block for 01-5263 , bfjb01010304000 air shaft for excel 400 plus , a01998326322990-thermocouple , ace02000352299a -thermocouple , a010200011ah998 heater for vertical seal a 3/8, 510l,600w, 230v , a010300014ah998 heater for horizontal seal a 3/8, 418l, 400w, 230v , aaf0300003bk990 knife (3mm thk) , a019983392ab070 locking pin for oi-5263 , a010715010yy02d tension spring for dancer , a030400008bc26a driver pulley for belt draw off , a260400006zz99a timing belt assly , a0413000228c26c driven pulley , bdph01030307600 timing belt 285-l-100 mbl make , a0441000162299a camozzi double acting cyl 61m2p080a0080 , akc0702012zz990 motor pulley , akc2506002bc260 tension pulley , baar07697000006 needle roller bearing hk 1210 , bcpb11411211205 camozzi short stroke single acting , bcp813441121016 camozzi double acting cyl dia 32 x 80 , bcpb41001100030 camozzi-single sol vlv-5/2 way-1/8 , bcpb41002100030 camozzi-single solonoid valve-3/2 way , bcpb41391208220 camozzi solonoid valve-5/2 way-1/4 , bcp853351000000 camozzi sealing ring 2661-1/8 , eatj01112705332 switch selector switch 3 pos
Tender For supply and installation of lubrication pump with drive motor to hmt radial drilling machine model rm-62 [ warranty period: 12 months after the date of delivery ] ]
Tender For supply, testing, installation and commissioning air cooling machine of capacity 51.000 cmh with 2 nos. centrifugal fan, 02 no 7.5 kw electric motor, v belt drive for both the fans, celdek pads, 4 bendpvc eliminators, water pump 1 hp (1w-1s) water distribution system with pumps, piping's, valves etc, air intake filters, g.i air intake louvers, fan outlet dampers and complete in all respect as per spec. attached with annexure "a" [ warranty period: 30 months after the date of delivery ] ]
Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.