Latest aac conductor Tenders | Government aac conductor Tenders

State Government

CTN :45440260

23 Jun, 2026 71.67 Lacs

Udhamsign Nagar - Uttarakhand

Tender For under the capital s.i. head, the work of installation of aerial bunched (ab) cable in place of the old and deteriorated acsr weasel conductor in various villages fed from the paheniya feeder emanating from 33/11 kv sub-station kanjabag. - under the capital s.i. head, the work of installation of aerial bunched (ab) cable in place of the old and deteriorated acsr weasel conductor in various villages fed from the paheniya feeder emanating from 33/11 kv sub-station kanjabagh under electricity distribution division, khatima, shall be carried out in accordance with the tender specifications. ( rates quoted without gst) (gst will paid extra)

State Government

CTN :45413292

11 Jun, 2026 NA

Ratnagiri - Maharashtra

Tender For job work of supply, erection & connection of xlpe insulated aerial bunched conductor (abc) 415 v lt line with rsj pole from stage -iv evt entrance gate to surge well transformer area and laying of lt cable from diesel generator set area stage -iv to inter audit entrance gate at stage -iv, pophali.

State Government

CTN :45432302

10 Jul, 2026 71.42 Lacs

Hyderabad - Telangana

Tender For (i) replacement of existing aacsr conductor with htls conductor from loc.no.240 to existing 132/33 kv kolanpaka ss (loc.no.240/5) (ii) replacement of cricuit breaker at 220/132/33 kv bhongirir ss and (iii) replacement of breaker along with bay equipment at 132/33 kv kolanpaka ss in omc, nalgonda

CTN :45424481

23 Jun, 2026 NA

Malda - West Bengal

Tender For hydraulic compressor capacity - 100t with one set die suitable for aac conductor 240 sq. mm (hyd. compressor new improved with remote hand operated double action hyd. pump fitted with 2 m hose and pressure recording gauge ). make/model - hcr 100 of yota or similar. ( warranty period : upto 30 months from the date of supply). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45436394

29 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of 1100v grade l.t. aerial bunched cable of size 3x120+1x95+1x16 sq.mm (phase wires bare messenger-cum-neutral wire+st.light wire), aluminium phase/street light conductor with xlpeinsulation conforming to is:8130/1984, aluminium alloy bare messenger conforming to is:398(part-iv)/1979, aerial bunch cable governing specification to is-14255/1995 with up to date amendments, if any. other technical specification should be as per annexure-a [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45392968

08 Jun, 2026 NA

Katihar - Bihar

Tender For supply of hydraulic crimping machine/hydraulic compressor, capacity 100 tonne, suitable for compression joints with feeder wire, complete with one set die suitable for aac conductor 240 sq.mm, new improved remote hand operated double action hydraulic pump fitted with 2 metre high-pressure hose and pressure recording gauge, forged steel compression head, high tensile steel dies, safety overload protection system, leak-proof hydraulic seals, robust steel construction, compact portable design suitable for ohe/psi maintenance works, capable of providing uniform compression for jumper, splice and terminal connections of aac conductors, suitable for outdoor field operation with corrosion resistant finish, make/model: hcr 100 of yota or similar; the material shall conform to the relevant rdso/irs specifications, approved drawings, and latest amendments thereof, and shall be suitable for satisfactory performance under railway service conditions. [ warranty period: 30 months after the date of delivery ] ]

CTN :45379590

15 Jun, 2026 5.00 Lacs

Sidhi - Madhya Pradesh

Tender For supply of lt xlpe aerial bunched cable, 1100v grade, 5 core configuration: (3 cores x 95 sqmm aluminium phase conductor + 1 core x 50 sqmm aluminium insulated neutral cum messenger conductor + 1 core x 16 sqm)(street lighting). item rates should be quoted excluding gst in column 7. please indicate gst percentage separately in column 8. all other charges, taxes, and transportation costs shall be borne by the supplier up to the site.

CTN :45349762

09 Jun, 2026 2.95 Lacs

Sikar - Rajasthan

Tender For procurement of materials for repair of various components used in the fixing of light poles installed across of the failure different wards within municipal area - 61.13 p/l of double wall corrugated hdpe pipe confirming to is 16205 p-24, stiffness class 750 n, externally corrugated and having smooth surface inside with hdpe coupler, elbow, tee at required depth below the ground for laying cable of following nominal outer dia. mfr test report from nabl accrediated is to be submitted. (excavation of earth & back filling with compaction is to be paid extra) all as per pre approved by engineer in-charge.. for additional technical parameters of products/ work, refer annexure "a" attached with this bsr 50mm dia. , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured copper cable confirming to is:1554 p-i / is:7098 p -i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity >99.7%, inner/outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench/cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure 'a' attached with this bsr 3 core , supplying and making one end termination with nickel plated heavy duty brass single compression gland (as per is 12943-1990)) sibg type consisting of check nut, gland body, metal washer(3 nos.), outer seal rubber ring, compression nut, heavy duty aluminium lugs (as per is 8309-1993) duly crimped with crimping tool, pvc tape as per is 8337-1976 of following size of pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr 4 x 10.0 sq.mm pvc tape roll , supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure "a' attached with this bsr type a lt connector for aerial bunched cable each 73.00

CTN :45352757

08 Jun, 2026 11.41 Lacs

Sikar - Rajasthan

Tender For street light accessories and phase wire work in losal area - work, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a"attached with this bsr ., 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, suspension clamp with eye hook & pole clamp, dead end clamp with eye hook & pole clamp, p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr, 2.0 mm thick, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 4 pole power contactors with following ac 1 rating 63 amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., one day & week reserve (analog type ), sitc of 3 /4 pole current limiting moulded case circuit breaker (mccb) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 v, 50 hz; o/l & s/c settings , conforming to is/iec 60947 p -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 690 v. provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product/ work refer annexure a attached with this bsr, 4 pole mccb with thermal magnetic release up to 100 amp , 10 ka, fixed o/l & fixed s/c setting, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. b class g.i. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350mm. and height 250 to 300 mm. and embodying the pipe compl