Latest aac conductor Tenders | Government aac conductor Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

State Government

CTN :45519071

09 Jul, 2026 NA

Rudraprayag - Uttarakhand

Tender For corrigendum : replacement of 33 kv bare conductor by aaac cable from chandika dhar to sersi on semi turnkey basis

State Government

CTN :45702913

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 6 sqmm

State Government

CTN :45702943

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 2. 100 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/ ,development of tube well with pump of suitable rating to that full satisfaction and as directed by the engineer-in-charge , miscellaneous items 1.5. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45702998

30 Jun, 2026 NA

Ambala - Haryana

Tender For supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45702999

30 Jun, 2026 NA

Ambala - Haryana

Tender For supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45703000

30 Jun, 2026 NA

Ambala - Haryana

Tender For supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45703001

30 Jun, 2026 NA

Ambala - Haryana

Tender For supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45704170

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d ,providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

State Government

CTN :45704911

30 Jun, 2026 NA

Ambala - Haryana

Tender For supply and erection of wall mounting type, solenoid driven, motorized, electromagnetic diaphragm dozing metering pump working on three-phase 220/240 v 50 hz electric supply with standard electronic controls, suitable for minimum dozing capacity 0 to 27 lph at 10 bar back pressure complete with necessary accessories, complete in all respects along with supply and erection of 1 no. voltage stabilizer with dozing pump along with 1 no. 300 litres capacity isi marked hdpe storage tank of approved make as per directions of engineer-in-charge ,supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

Aac Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors