Latest acoustic insulation Tenders | Government acoustic insulation Tenders

State Government

CTN :45459254

15 Jun, 2026 41.38 Lacs

Delhi - Delhi

Tender For providing fire proof doors acoustic insulation for diesel generator set room at rgss hospital tahirpur delhi-100093.

State Government

CTN :45363284

05 Jun, 2026 41.38 Lacs

Delhi - Delhi

Tender For providing fire proof doors acoustic insulation for diesel generator set room at rgss hospital tahirpur delhi-100093

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45125146

18 May, 2026 NA

Amravati - Maharashtra

Tender For e-tender no msetcl/ee/ehv/o&m/dn/bld/t/2026-27/srm/t-1 , work of providing and fixing high voltage busbar insulation tape and heat shrinkable busbar insulating tubing at various substations under ehv o&m division, buldhana (second call). estimated cost: rs 4966368/- (including all taxes),

CTN :44933285

11 May, 2026 8.63 Lacs

Gandhidham - Gujarat

Tender For corrigendum : supply of electrical and safety materials e e - mnre approved 100w or more monocrystalline solar panel , 2nos heavy duty gi solar panel stand , 12v 20a mppt hybrid solar charge controller and 1000 w grinder , aluminum platform step ladder 10 feet , aluminum platform step ladder 6 feet , rubber insulating mat , front load single phase automatic washing machine rated capacity 6 5kg , heavy duty washing machine trolly , casing caping wiring of 8m modular extension board , 20 liter hr purification capacity wall mount r o system with 8 liter , automatic electric iron 1000w , 20 x high power binoculars with night vision and tripod stand , 5 star ceiling fan 1200mm , high intensity led torch , 1 phase 1hp monoblock pump , dol starter for 1 phase 1hp monoblock pump , 3 phase 415v 3hp monoblock pump , 3 phase 3hp monoblock pump starter , installation of 1hp and 3hp monoblock pump including material , hand held gi monoblock pump guard , hand held digital multimeter , electric lawn mower with grass catcher , industrial safety belt , wall clock , safety gumboot size 8 and 9 , industrial safety helmet , 10 w led aviation light , hiring of plumber upvc pipe 4 nos ss tap for washing machine , copper flexible frls wire , miscellaneous work

CTN :44986829

10 May, 2026 NA

Nashik - Maharashtra

Tender For 1st call e-tender notice for the work of providing & fixing of medium voltage conductor cover tape, high voltage busbar insulation tape and heat shrinkable busbar insulating tubing at various 220kv & 132kv substations under ehv o&m division, jalgaon.

CTN :44971345

13 May, 2026 2.18 Crore

Nagpur - Maharashtra

Tender For supply of aluminium armoured cable , gi perforated cable trays 100 mm wide x 50 mm depth x 1point 6 mm thickness , raceway 150 mm wide x 50 mm depth x 1 point 6 mm thickness , switch socket 6 modular box 16 amp switch socket 6 amp , providing and laying cat 6 6 pair cable with accessories , supply and fixing of 4 way tpn horizontal db box with accessories , supply and fixing of 63 amp isolator , supply and fixing of 63 amp rccb , supply and fixing of 16 amp mcb , supply and fixing of 40 amp rccb , supply and fixing of 100 amp isolator , supply and fixing of 100 amp rccb , scaffolding , sitc of ups 20 kva with isolation transformer , sitc of 2x2 clean room luminaries , dismantling aluminium gypsum partitions doors windows fixed , dismantling tile work in floors and roofs 10 25 mm thick , cement concrete flooring 124 mix 40 mm thick , modular walls with 60 mm thick puf panels , modular ceiling with 60 mm thick puf panels , epoxy flooring 5 mm thick , aac block masonry 150 230 300 mm thick , 12 mm cement plaster 1 4 mix , vitrified tile 600x600 mm , pvc flooring , plaster of paris putty 2 mm thick , wall painting with acrylic emulsion , granite stone slab for platforms , extra for granite facia drops , extra for openings in granite for sinks , reinforced cement concrete work , centering and shuttering for shelves , steel reinforcement for rcc , stainless steel kitchen sink 610x510 mm , cp brass waste coupling 32 mm , coat hook with bracket , 600 mm long towel rail , cp brass angular stop cock , cp brass bottle trap 32 mm , upvc connection pipe with brass unions , c p sink cock with regular swinging spout table mounted model , c p brass extension nipple 15mmx50mm , stainless steel cabinets under counter and overhead , storage cabinets under counter and overhead , hermetically sealed swing door 900mm w x 2100mm , hermetically sealed swing door 1500mm w x 2100mm h , flush door shutters isi marked non decorative 35mm thick , extra for lipping with teak wood battens 25mm minimum depth , extra for vision panel not exceeding 0 point1 sqm rectangular or square , laminated sheet , h type stainless steel pull handle 304 grade 25x600mm , aluminium extruded section body tubular type universal hydraulic door closer , pair design lever handle on roses and escutcheons with mortise sash lock , dgu glass 1200mm x 1400mm , pass box 580 x 650 x 700 mm id 1 , pass box 230 x 230 x 295 mm id 1 , aluminium work for fixed portions polyester powder coated 50 micron , aluminium shutters for doors windows , glazing in aluminium frames 5mm float glass , pre laminated particle board for panelling 12mm thick , removal and refixing mineral fibre false ceiling tiles 595x595mm , cpvc pipes 15mm nominal dia hot cold water , cpvc pipes 20mm nominal dia hot and cold water , cutting holes in rcc floors roofs up to 15x15cm for drain pipes , trap self cleansing 100mm inlet outlet sand cast iron s and s , trap self cleansing 100mm inlet 75mm outlet sand cast iron s and s , glazed stoneware pipes class sp 1 100mm 1 is1 cement mortar , demolishing cement concrete 136 or richer , cement concrete work up to plinth level 124 mix , square mouth sw gully trap class sp 1 100x100mm p type , corner coving , steel work in built up tubular trusses hot finished welded tubes , eye and face wash station floor mounted dx type double skinned ahu, air cooled outdoor vrf units, ahu connection kit, hepa filter plenum laminar air flow system, gi ducting for tb lab, indoor ducting thermal insulation, exposed ducting thermal insulation, acoustic insulation for ducting, ahu control unit //bid details 2 / 94

Central Government/Public Sector

CTN :44846055

04 May, 2026 43.73 Lacs

Dharwad - Karnataka

Tender For corrigendum : supply of supply of vrv-vrf copper pipe and insulation , refrigerant piping 2.2 tr dx split ac wallmount stand , refrigerant piping 2.2 tr dx split ac copper piping , drain piping 32 mm dia , control and transmission wiring- 4c x 2.5sqmm cable , control and transmission wiring- shielded 2c x 1.0 sqmm , r410a-r32 refrigerant charging , factory fabricated gss 22 g rectangular ducts , acoustic insulation with 25 mm class 1 , damper controller , 300mm dia flexible duct , rectangular mixing boxes , alumnium lenier grill , timer for hiwall split ac , 4 way cassette type indoor ac units capacity- 6.36tr-2400cfm duct indoor with remote controller , 4 way cassette type indoor ac units capacity- 5.5tr-2047cfm duct indoor with remote controller , 4 way cassette type indoor ac units capacity- 3.0tr-1183cfm 4way cassette indoor with remote controller , 4 way cassette type indoor ac units capacity- 2.0tr-1183cfm 4way compact cassette indoor with remote controller , 4 way cassette type indoor ac units capacity- 2.2tr-non vrv hiwall split indoor and outdoor with remote controller , central remote controller , 60 hp - out door unit , 10 hp - out door unit , 60 puls 14 hp outdoor unit ms stand , vrv-vrf multi connecting piping kit for odu , refnet- y joints , cable trays - 300mm-w x 100mm d x 1.8mm-thickness gi perforated cable tray with cover , installation and service charges for low side works , installation and service charges for high side works

State Government

CTN :44939153

28 Apr, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of acoustical insulation (q3)

Central Government/Public Sector

CTN :44934062

21 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply of electrical insulating hand gloves class 4 for electrical work usage with 36kv working voltage as per iec60903:2014 without joint .test potential 40000 volts ,size: 410 mm length. color:red/ivory [ warranty period: 30 months after the date of delivery ]

Acoustic Insulation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector