Latest acrylic plate Tenders | Government acrylic plate Tenders

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

CTN :45704516

10 Jul, 2026 NA

Meerut - Uttar Pradesh

Tender For supply of photo with frame , coffee machine , mosquito bat , car flag , hand towel , jar glass , water camper 10 ltr , plastic cooler , flag rope , iron cooler big , wooden almirah big , airwick machine , comb , wall fan , ro 10 ltr , water dispenser with refrigerator , 2 core 2.5 mm wire , casing capping 1 mm , water motor pump 0.5 hp , brass name plate , 6mm golden acrylic 8 x 1.5 mm , towel large , sofa clothes , photo print 3 x 2 , 6mm acrylic plate with fitting 16 x 11 , 6mm bracket acrylic plate both side , name plate 18 x 12 , executive table 5 x 2.5 , laser pointer , starflex with pasting 25 x 21 , starflex with pasting 7 x 5 , t flag , lancer flag , table cloth with logo , adaptor , name plate steel 1 x 4 , wire 1 mm , 2mm foam

Central Government/Public Sector

CTN :45505669

29 Jun, 2026 12.50 Lacs

Chittorgarh - Rajasthan

Tender For bid to ras bid to ras supply of air wick , air wick freshner spray , white cement 1kg pack , urinal cubes , society flag 6x4 ft , society flag 4x3 ft , colin , phenyl white , thinner oil , nylon wire 100 mtr , tap go wheel for brush cutter , grinding wheel stone cutter , pencil cell aa , pencil cell aaa , distilled water , all out refill , screw 35 8 , acid , ghadi surf , mop refill unique , mop set unique , self drilling screw 1 2 , self drilling screw 1 , fawda with iron handle , genthi , khunt , table cover 8x4 inch cloth , hit spray , grinding wheel wooden cutter , hand gloves technical work , broom large , window pan glass , glass silicon , bamboo stick , reza cloth , anchor bolt , nut bolt shrub master , napthelene balls , welding rod , paint red 4 ltr pack , paint white 4 ltr pack , paint black 4 ltr pack , paint brown 4 ltr pack , paint golden brown 4 ltr pack , screw 25 6 , screw 19 6 , screw 38 6 , wooden moulding beading 1x3 4 , wooden beading 35x12 , wooden beading 22x12 , wire gauge , hand chisel 1 2 , nails 10 type , hand chisel 1 4 , jamboor plier 12 inch , water level measuring tool , fevicol , grinding wheel , grinding wheel 60 no , grinding wheel 80 no , plywood 12mm 8x4 , plywood 19mm 8x4 , curtain patti , curtain bracket , screw driver set taparia 840 , taparia plier 7 inch , safety shoes no 09 , hammer , crc spray , iran kabja 4 inch , rivets all size aluminium , welder face mask black mirror , ss pipe 1 inch , square pipe 1 inch , hammer drill bit all size , bit all size , ss welding rod , welding holder small size , cloth stand iron wire , right angle , abro tape , plastic paints , distemper white , distemper 8524 , tera cota 4 ltr pack , paint grey 4 ltr pack , 3 core wire 2 point 5 mm , fm 01 timer , bulb holder , door bell , pvc tape roll , pvc gang box 1 plus 1 , pvc gang box 2 plus 2 , pvc gang box 16 amp , three pin top 16 amp , three pin top 6amp , socket 6 amp , switch 6 amp , aluminium lugs 25 mm , aluminium lugs 35mm , aluminium lugs 50mm , aluminium lugs 70mm , connector 32 amp lnt , led bulb 7w , led light 30 w , led flood light 100 w , aluminium cable 6mm , aluminium cable 10mm , drill bit 8mm to 16mm set , wire 0 point 75 mm 2 colour , wire 1 mm 2 colour , wire 1 point 5mm 2 colour , wire 2 point 5 mm 2 colour , wire 4 mm 2 colour , exhaust fan , mcb 4 pole 63 amp , mcb 4 pole 32 amp , mcb 6 amp 1 pole , mcb 10 amp 1 pole , mcb 16 amp 1 pole , mcb 25 amp 1 pole , water tap cp , gi nipple 1 2 2 inch , gi nipple 1 2 4 inch , gi axe nipple 1 2 , gi nipple 1 4 inch , gi nipple 1 6 inch , gi union1 2 inch , gi union1 inch , gi socket 1 inch , gi socket 1 2 inch , gi elbow 1 2 inch , gi reducer 1 1 2 , gi sintex tank nipple , gi socket 2 inch , gi tee 1x1 , gi plug 1 2 inch , teflon tape , pvc solvent , cpvc elbow 1 2 inch , cpvc socket 1 2 inch , cpvc mta 1 inch , cpvc fta 1 inch , m seal , pillar cock head half turn , water tap waisher big size , lead connection waisher , pvc pipe 4 inch for 10 feet each , flush valve waisher , lead connection pipe 2 feet , zoloto handle valve 1 2 inch , zoloto handle valve 1 inch , cana flex pipe 2 inch , cana flex pipe 1 2 inch , showel with dori , pvc hose nipple , iran pipe clip 2 inch , hdpe pipe 1 1 2 , cpvc pipe1 2 10feet each pipe //bid details 2 / 114

State Government

CTN :45431206

30 Jun, 2026 NA

Malappuram - Kerala

Tender For corrigendum : supply,installation,testing and commissioning of 12 items of equipment for incubation cum entrepreneurship centre for plastic waste management, dept of economics,university of calicut under the pm-usha scheme - sorting conveyor with sensor, plastic crushing machine, plastic baling machine - hydrolic, plastic shredder machine, plastic grinding machine, plastic extrusion machine, moulding machine, faad machine, chiller machine, aglo machine, plastic squeezer machine, miscellaneous equipment:flexural and compression testing machine

State Government

CTN :45585176

29 Jun, 2026 8.18 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment in village tilpata karanwas, greater noida. - sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and uv resistant and environmental friendly., the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. all open ends of pipe to be closed with gl/lldpe caps. base plate cover shall be made virgin lldpe plastic by roatational molding with minimum 8mm thickness. uv resistant and colour as approved by engineer in charge. ligh quality grip rubber should be used on handles., foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by engineer-in charge. the equipment shall be fitted with in-built limiters. the equipent shall be fixed on ground with concrete of minimum strength m-25 and js haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of equipemnt etc (the cement concrete and excavation work shall be paidseparately)., seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and uv resistant and environmental friendly., bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/illdpe caps for user safety. the equipment to be fixed on ground with concrete of minimum

CTN :45388756

20 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of providing and fixing surf board size 1150x900x1250mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of virgin lldpe plastic by rotational moulding with minimum 4mm thickness, uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearing should be used in the equipment’s manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in- charge. the equipment shall be fitted within built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), providing and fixing rowing machine of size 1280x800x1150mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strenght m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material,shape of equipment, colour (of metal, seat and pedal), providing and fixing sky walker of size 850x800x1800mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum

Central Government/Public Sector

CTN :45548133

29 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For supply of cam switches with plastic moulding used in m/s. saitronix make angle transmitter of master controller to saitronix pt.no: 4mt-2041. [ warranty period: 30 months after the date of delivery ] ]

CTN :45518580

22 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For flex 8x6 , sun board 3x4 , sun board 4x1 , flex bd with frame 4x3 , flex 1.8x1.4 , acrylic plate 4x1 , acrylic plate 2x1 , book self

corporations/Associations/Others

CTN :45499128

01 Jul, 2026 NA

Gulbarga - Karnataka

Tender For supply of material addition silicon light body , impression trays- dentulous perforated , impression trays-dentulous rimlock perforated , impression trays-edentulous perforated , impression trays-edentulous rimlock perforated , inlay wax box , instrument tray plastic , instrument tray sheets , intraoral photographic mirror , investment liquid , investment material-packets , korsolex disinfectant 2 percent glutaraldehyde , lacron carver , lignocaine spray , local anaesthesia lignocaine hcl 2 percent with adrenaline 1 ratio 80000 , macintosh sheet , metal gauge , metal polishing cake , metallic suction tip , mixing gun for temporary crown material 10 ratio 1 ratio , modelling wax , monophase addition silicone impression material , mouth mask , mouth mirror with head and handle , mouth prop adult , needle holder , non eugenol zinc oxide impression paste , peeso reamer assorted , periosteal elevator , pkt carving set , plaster spatula-straight , plastic filling instrument , polishing buff , porcelain mixing jar , probe , protective eye glass , protemp - temporary crown and bridge material , pumice , ring liner , round condenser , rpd pattern wax , sandpaper , sandpaper mandrel , self cure resin pink liquid , self cure resin pink powder , separating media , shade guide vita , silane coupling agent , spatula - agate , spirit , sprue wax 2mm , steel hammer , sterilization indicator tape , sticky wax , straight artery forceps , surgical gown disposable , surgical scissors curved , surgical scissors straight , tissue paper , tooth coloured acrylic resin powder shade b , tooth coloured inlay wax , tooth moulding powder heat cure shade b , tooth moulding powder heat cure shade c , tooth preparation burs s0-21 , tooth preparation burs sf 13 , tooth preparation burs tf 12 , tooth preparation burs tr 13ef , tooth preparation burs tr13 , universal plier , universal tray adhesive , vaseline , vita gingival ceramic powder , wax knife , wax spatula , wire cutter , zinc oxide eugenol cement liquid , zinc oxide eugenol impression paste 3-o vicryl suture with reverse cutting needle, absorbable sterile fibrillar collagen wound filler hemostatic agent (2.5ml), acrylic polishing cake, agar agar, agar duplication flask, airortor lubricant spray, alginate, alloy - all metal, aluminium oxide powder , aluminium oxide powder , applicator tips (sticks), articulators hinge type, articulators mean value (three point), autoclavable self sealing sterilization pouches (90x260mm), beading wax, bone graft putty, boxing wax, bp blades no.15, bp handle number 3, bur holder box, ceramic building brush size 6, ceramic building brush size 8, ceramic buildup liquid, ceramic laminate depth orientation tooth preparation burs, ceramic opaque liquid, ceramic powder dentin[a2], chair side ceramic polishing kit, chair side metal polishing kit, cheatle forceps, cheek retractor large, cheek retractor small, clinical patient drapes (disposable), cotton roll 500gm, crucible, curved artery forceps, debubblizer , dental floss, dental plaster, dental stone, dental varsity flask no.9, denture adhesive powder, die cutting blades, die cutting saw, die hardener, die lubricant , die pins with sleeve, die seperator, die stone, disposable glass, disposable gloves[m], disposable gloves[s], enamel tray, fiber post assorted, flowable composite, fox plane, gates glidden assorted, gauze, pattern resin, gingival cord packer, gingival retraction cord 00 size, gingival retraction cord 000 size, glass slab, green cloth surgical gown (universal), green stone burs (torpedo shaped), greenstick compound, handwash, heat cure acrylic resin liquid, heat cure acrylic //bid details 2 / 110

Central Government/Public Sector

CTN :45430693

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/03 date: 24-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.

Acrylic Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector