Latest acrylic plate Tenders | Government acrylic plate Tenders

Central Government And Public Sector

CTN :45290614

08 Jun, 2026 17.02 Lacs

Kollam - Kerala

Tender For corrigendum : the supply of ab switch components hdg cast iron roller hdg polymer insulator end fittings six turns and twelve turns spring

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

State Government

CTN :45288353

29 May, 2026 NA

Ramtek - Maharashtra

Tender For material supply for all type construction work for year 2026-27 (under all fund) - sand (kanhan), sand local, soft murun, hard murun, metal 100 mm, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, dust, rcc pipe 300 mm with colar, rcc pipe 450 mm with colar, rcc pipe 600 mm with colar, rcc pipe 800 mm with colar, rcc pipe 900 mm with colar, rcc pipe 1000 mm with colar, cement 53 grade isi mark, still 6 mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, centring tar, vibrator needle, water trankar & tractor troali, backhoe loader, vibrator roller, simple steering road roller, mixchar machine, excavator 70 to 120, excavator 120 to 220, fiori 1 cubic meter, fiori 2 cubic meter, centring plate, water proof compound, acrylic polymer modified liquid, acrylic polymer modified waterproofing powder, fibre glass mesh, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, oil bound distemper, primer, washabe oil bound distemper, putty, birla white cement, terpentine, wood primer, information board still with painting, single lef door 16 mm thik, single lef door 32 mm thik, solid panel pvc internal door shutter, door kittas, door fremas, aluminium fixed windows (two track sliding ), aluminium fixed windows (three track sliding ), aluminium fixed windows with mosquito net (three track sliding ), chequered tiles, caramic tiles, vetrifide tiles, cota stone, marble tiles, granite tiles, red bricks (hat bhatta), red bricks (round bhatta), bricks fly aish, peving block 60 mm, peving block 80 mm, rcc compound poles 8ft, rcc compound poles 6 ft, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, screw down bib 15mm, ladies ceramic urinal, wall mount urinal, water close pan complit, indian orissa pan, basin pan, water storage tank 500 ltr, water storage tank 1000 ltr, water storage tank 2000 ltr, steel work, mild steel hollow pipe, mild steel i section beam, mild steel c section beam, mild steel angle, cenring kills, nut bolt and washer, profile sheet isi 0.50 mm, profile sheet fancy isi 0.50mm, g.i. sheet, stenless steel seatting bench, mild steel seatting bench, rcc bench, barbed wire / fenshing wire, electric brecker machine

Central Government And Public Sector

CTN :45336367

29 May, 2026 NA

Lumding - Assam

Tender For supply of the successor's board shall be made in inverted u shape. the inverted u-shaped half round frame shall be bronze color hollow extruded profile of 35mm thickness and cross sectional outer radius of r 30mm. a 2.0mm thick semicircular bronze color aluminum sheet shall be inserted in the top of the frame inthe profiled groves of the frame. the 70um vinyl in off white colored approved text and graphics shall be computer cut on plotter and pasted on the display face. individual 1.8mm thick name plate shall be bronze color extruded profile of 6.7mm outer curvature, with integral circular slots provided length wise to insert extruded dumbbell sleeve to interlock different sections for connecting two name plates and also to impart strength to the board. the 70um ivory colored approved text and graphics shall be computer cut on plotter andpasted on the display face of the name plates. this text and graphics pasted on the semicircular sheet and individuals name plates shall be protected from dust and vandalism by sliding 1mm thick clear acrylic plates in the grooves provided. the whole assembly of name plates along with semicircular sheets at the top shall be inserted in the groove proved in the main frame. the bottom horizontal arm of the frame shall be connected to the vertical arms of the inverted frame by using injection molded abs corner two sturdy keyhole brackets shall be provided on the rear side of the vertical arms of the frame to flush mount the successor board on the wall size 28''x 57.5'' gst included make superior quality or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :44983564

25 May, 2026 40.00 Lacs

Bundi - Rajasthan

Tender For corrigendum : purchase of surgical items and sutures at bundi - surgical and sutures, absorbable gelatin sponge ip 66, size 80(+-10) mm x 50 mm x 10 mm should be sterlized., asepto syringe with transparent bulb sterile, 60 ml, blood administration set / blood transfusion set sharp and easy piercing spike suitable for blood bags and standard blood containers transparent cylindrical drip chamber with filter.filter size should be 200+20 micrometer. 150 cm long smooth kink resistant tubing efficient roller clamp to control and adjust the transfusion rate should conform to is 9824(part 3):1996, disposable sterile surgical rubber gloves size 6 inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 6 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards), disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powdered,,without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards), disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards, suction catheter, sterile. size: fg 5 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 6 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 8 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 10 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should co

Central Government And Public Sector

CTN :45182832

19 May, 2026 NA

Lumding - Assam

Tender For supply of the successor's board shall be made in inverted u shape. the inverted u-shaped half round frame shall be bronze color hollow extruded profile of 35mm thickness and cross sectional outer radius of r 30mm. a 2.0mm thick semicircular bronze color aluminum sheet shall be inserted in the top of the frame inthe profiled groves of the frame. the 70um vinyl in off white colored approved text and graphics shall be computer cut on plotter and pasted on the display face. individual 1.8mm thick name plate shall be bronze color extruded profile of 6.7mm outer curvature, with integral circular slots provided length wise to insert extruded dumbbell sleeve to interlock different sections for connecting two name plates and also to impart strength to the board. the 70um ivory colored approved text and graphics shall be computer cut on plotter andpasted on the display face of the name plates. this text and graphics pasted on the semicircular sheet and individuals name plates shall be protected from dust and vandalism by sliding 1mm thick clear acrylic plates in the grooves provided. the whole assembly of name plates along with semicircular sheets at the top shall be inserted in the groove proved in the main frame. the bottom horizontal arm of the frame shall be connected to the vertical arms of the inverted frame by using injection molded abs corner two sturdy keyhole brackets shall be provided on the rear side of the vertical arms of the frame to flush mount the successor board on the wall size 28''x 57.5'' gst included make superior quality or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45113458

18 May, 2026 NA

East Sikkim - Sikkim

Tender For supply of keyboard and mouse , maintenance box , logic card , power supply card , motherboard h310 , ups microtech 1 kva , epson l 380 main board , ssd 256 gb , pressure roller , teflon sleeve , ccd scanner , battery lithium polymer

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

Central Government/Public Sector

CTN :44772856

14 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of repair kit for water glow rod, each set consists three items, given as under, 1.o-ring size od-15mm,id-09mm,t-07mm, qty-01no/set 2.cork sheet gasket outer size-178mm x 46mm x3mm, inner size150mm x 10mmx3mm, hole dia 06mm (06 holes), qty-01 no/set. 3.acrylic plate size- (l-w-t) 174mm x 25mm x 5mm, qty-01 no/set. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44715877

16 Apr, 2026 NA

Delhi - Delhi

Tender For auction sale of oil packed in ms drums as per the crcl lab report, cont no-baxu2590059,wax packed in ms drums as per the lab report, cont no-baxu2595678,completely mutilated rags condition, cont no-blju2032350,mattress cover & packing materials, cont no-bmou2331782,different types of vehicle head lamp cover, cont no-caau5566670,soil packed in plastic bags, cont no-caiu2226766,clay as per lab report the sample, cont no-caiu3639065,old & used vehicle mercedes benz, cont no-caxu6330003,display tubes 14 inch colour picture tube, cont no-cmau5103243,display tubes 14 inch colour picture tube, cont no-cmau5734742,oil packed in flexi tank as per lab report, cont no-crsu1018042,cements brand : shree ultra most, cont no-cxdu1014057,old clothes mutilated condition, cont no-dfsu7070955,pp granules, cont no-dxbu5122120-cargoincont-trlu9050967/20,die casting mould of different sizes, cont no-ecnu2246458,display tubes 14 inch datagraphic, cont no-espu8043332,dust stone, cont no-fciu2022879,oil in ms drums. as per the crcl lab report, cont no-fciu2890921,a) medical equipment brand : novair refrigeration, cont no-fciu3210280,punching press machine & accessories, cont no-fciu6315010,lead base ceramic glazes powder, cont no-fscu3360458,oil packed in ms drums, cont no-fscu3890669,display tubes 17 inch data graphic display tubes, cont no-gesu5913901,oil packed in ms drums, cont no-gldu2946786,oil packed in ms drums, cont no-gldu5725032,badminton racket & consumer goods, cont no-hjcu8432066,wooden lumber, cont no-hlxu6098658,multicolour unstitched fabric rolls, cont no-hlxu8315264,oil (black colour) packed in ms drums, cont no-ilcu5255410,lead concentrate, cont no-lhcu2962521,assorted mix furniture items, cont no-mrku2834829, as per lot annexure,dolomite packed in jumbo bags, cont no-mrku9264029,a) medical equipment, cont no-mscu5376363,old & used machine & accessories roller, cont no-msku8748099,stocklot pvc coated fabric rolls, cont no-msku8927828,novairmachine- 16 no, cont no-msmu6583684,sand dust powder, cont no-oclu4176753,sodium chloride, cont no-oolu1375903,mini cell phone keypad, cont no-oolu8609454,display tubes 14 inch datagraphic, cont no-pmlu9013554,display tubes 17 inch data graphic display tubes, cont no-stru9410072,old & used vehicle (rusted), cont no-sudu5984860,black colour semi solid lumps, cont no-szdu3749203,construction gravel, cont no-tclu3398489,assorted mix items, cont no-tclu8637924,small pebbles & sand, cont no-temu4969208,chemical consists of polyethylene, cont no-tghu1528330,polymer blend, cont no-tghu1556183,medical equipment empty tank, cont no-tghu6196618,cfl half spiral glass / burner, cont no-tghu6339597,old & used heavy electric machine, cont no-tghu9092788,pvc rolls in stocklot condition, cont no-tghu9471879,rough wooden logs, cont no-trlu3732661,unprinted paper rolls, cont no-ttnu9480906,unprinted paper rolls mix size, gsm & quality, cont no-uacu4909411,unprinted paper rolls mix size, gsm & quality, cont no-wlnu9903714,tarpaulin in cut pieces (synthetic strip in cut pieces), cont no-xinu8011403

Acrylic Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors